SWITCH-MIB
Imported Objects
Objects
15 total| Object Name |
|---|
switchProductMibThe MIB module for supporting HS150 product specific MIB objects. MODULE-IDENTITY .1.3.6.1.4.1.207.8.9.3.1.1 |
uplinkSwitchChassisTypeThe particular type of Hs150 chassis.ro Enumeration .1.3.6.1.4.1.207.8.9.3.1.1.1 |
portMirrorGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.9.3.1.1.2 |
portMirrorProbePortThe port to which the probe or sniffer is connected. Port Mirroring is enabled through the portMirrorSrcEnable and portMirrorDstEnable flag.rw INTEGER .1.3.6.1.4.1.207.8.9.3.1.1.2.1 |
portMirrorSrcEnableA flag to enable source sniffing at the probe port.rw PortMirrorStatus .1.3.6.1.4.1.207.8.9.3.1.1.2.2 |
portMirrorDstEnableA flag to enable destination sniffing at the probe port.rw PortMirrorStatus .1.3.6.1.4.1.207.8.9.3.1.1.2.3 |
portMirrorTableA table that contains the ports and type of frames to be sniffed. This table allows more than one port to be sniffed at a time. SEQUENCE OF PortMirrorEntry .1.3.6.1.4.1.207.8.9.3.1.1.2.4 |
portMirrorEntryA list of information sniffing characteristics for each physical port. PortMirrorEntry .1.3.6.1.4.1.207.8.9.3.1.1.2.4.1 |
portMirrorSrcUcastFramesA flag to activate sniffing source unicast frames, e.g., forwarded unicast frames only.rw PortMirrorStatus .1.3.6.1.4.1.207.8.9.3.1.1.2.4.1.1 |
portMirrorSrcBMCastFramesA flag to activate sniffing source broadcast and multicast frames.rw PortMirrorStatus .1.3.6.1.4.1.207.8.9.3.1.1.2.4.1.2 |
portMirrorSrcDiscardedFramesA flag to activate sniffing source frames which were discarded by the ARL.rw PortMirrorStatus .1.3.6.1.4.1.207.8.9.3.1.1.2.4.1.3 |
portMirrorSrcMarkedFramesA flag to activate sniffing source frames which were marked by the ARL to be sniffed.rw PortMirrorStatus .1.3.6.1.4.1.207.8.9.3.1.1.2.4.1.4 |
portMirrorDstAllFramesA flag to activate sniffing of all destination frames.rw PortMirrorStatus .1.3.6.1.4.1.207.8.9.3.1.1.2.4.1.5 |
portMirrorDstMarkedFramesA flag to activate sniffing destination frames which were marked by the ARL to be sniffed.rw PortMirrorStatus .1.3.6.1.4.1.207.8.9.3.1.1.2.4.1.6 |
switchModelTypeThe model type of the switch.ro Enumeration .1.3.6.1.4.1.207.8.9.3.1.1.3 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.