ATKK-WLAN-ACCESS
AI MIB Summary
The ATKK-WLAN-ACCESS MIB enables SNMP-based monitoring and management of AT-TQ series wireless access points, specifically exposing metrics for radio interface status, client association counts, signal strength, and throughput statistics.
Private MIB for the AT-TQ series wireless access point.
Main OID:
atkkWlanAccess.1.3.6.1.4.1.207.8.42.6
60
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
60 total| Object Name |
|---|
tq2403 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.13.13 |
tq2450 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.13.19 |
tq2403ex OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.13.20 |
tq3600 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.13.22 |
tq3200 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.13.24 |
tq3400 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.13.25 |
tq4400 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.13.26 |
tq4600 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.13.27 |
tq4400e OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.13.34 |
atkkWlanAccessPrivate MIB for the AT-TQ series wireless access point. MODULE-IDENTITY .1.3.6.1.4.1.207.8.42.6 |
atkkWiAcVersionThe version number of this MIB modulero Integer32 .1.3.6.1.4.1.207.8.42.6.1 |
atkkWiAcClientsConnected Stations List. This list consists of entries which describe STAs which are currently connected (associated) to the AP. OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.42.6.2 |
atkkWiAcClientTableA table that contains information about STAs which are currently connected to the AP. SEQUENCE OF AtkkWiAcClientEntry .1.3.6.1.4.1.207.8.42.6.2.1 |
atkkWiAcClientEntryInformation about a STA. AtkkWiAcClientEntry .1.3.6.1.4.1.207.8.42.6.2.1.1 |
atkkWiAcClientAddressMAC address identifying a peer STA.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.42.6.2.1.1.1 |
atkkWiAcClientSSIDSSID to which the STA is associated.ro SsidString .1.3.6.1.4.1.207.8.42.6.2.1.1.2 |
atkkWiAcClient80211Spec802.11 technology which the STA is using.ro Enumeration .1.3.6.1.4.1.207.8.42.6.2.1.1.3 |
atkkWiAcClientChannelThe radio channel which the STA is using.ro Integer32 .1.3.6.1.4.1.207.8.42.6.2.1.1.4 |
atkkWiAcClientAgeTime (in seconds) since the STA was associated.ro Counter32 .1.3.6.1.4.1.207.8.42.6.2.1.1.5 |
atkkWiAcClientUserIDUserID of the STA which is associated.ro UserIdString .1.3.6.1.4.1.207.8.42.6.2.1.1.6 |
atkkWiAcAPsNeighboring APs List. This list consists of entries which describe APs which is found by the AP. OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.42.6.3 |
atkkWiAcAPTableA table that contains information about APs nearby. SEQUENCE OF AtkkWiAcAPEntry .1.3.6.1.4.1.207.8.42.6.3.1 |
atkkWiAcAPEntryInformation about a neighboring AP. AtkkWiAcAPEntry .1.3.6.1.4.1.207.8.42.6.3.1.1 |
atkkWiAcAPAddressMAC address of the neighbor AP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.42.6.3.1.1.1 |
atkkWiAcAPSSIDSSID of the neighbor AP.ro SsidString .1.3.6.1.4.1.207.8.42.6.3.1.1.2 |
atkkWiAcAP80211Spec802.11 technology which the neighbor AP is using.ro Enumeration .1.3.6.1.4.1.207.8.42.6.3.1.1.3 |
atkkWiAcAPChannelThe radio channel which the neighbor AP is using.ro Integer32 .1.3.6.1.4.1.207.8.42.6.3.1.1.4 |
atkkWiAcAPRSSIRSSI (signal strength) of the neighbor AP.ro Integer32 .1.3.6.1.4.1.207.8.42.6.3.1.1.5 |
atkkWiAcAPRadarDetectedThe message of Radar Detected.ro TrapString .1.3.6.1.4.1.207.8.42.6.3.1.1.6 |
atkkWiAcAPChannelsThe channels of Radar Detected.ro ChannelString .1.3.6.1.4.1.207.8.42.6.3.1.1.7 |
atkkWiAcAPDetectConfigThe enable/disable configuration of the Neighbor AP detection. wlan0/wlan1 for TQ2403/EX wlan0 for TQ2450/TQ3600/TQ3200/TQ3400/TQ4400/TQ4600/TQ4400erw Enumeration .1.3.6.1.4.1.207.8.42.6.3.2 |
atkkWiAcAPDetectConfig2The enable/disable configuration of the Neighbor AP detection. wlan1 for TQ2450/TQ3600/TQ3400/TQ4400/TQ4600/TQ4400erw Enumeration .1.3.6.1.4.1.207.8.42.6.3.3 |
atkkWiAcMacACLMAC address filters List. OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.42.6.4 |
atkkWiAcMacACLTableA table that contains MAC address filters. SEQUENCE OF AtkkWiAcMacACLEntry .1.3.6.1.4.1.207.8.42.6.4.1 |
atkkWiAcMacACLEntryMAC address filter. AtkkWiAcMacACLEntry .1.3.6.1.4.1.207.8.42.6.4.1.1 |
atkkWiAcMacACLAddressMAC address which is filtered.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.42.6.4.1.1.1 |
atkkWiAcMacACLModeConfigThe mode configuration of the MAC filtering.rw Enumeration .1.3.6.1.4.1.207.8.42.6.4.2 |
atkkWiAcNotification OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.42.6.5 |
atkkWiAcNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.42.6.5.0 |
atkkWiAcAssociatedThis notification is sent when a STA was connected. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.42.6.5.0.1 |
atkkWiAcDisassociatedThis notification is sent when a STA was disconnected. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.42.6.5.0.2 |
atkkWiAcUnknownAPThis notification is sent when an unknown AP was detected. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.42.6.5.0.3 |
atkkWiAcFilteredThis notification is sent when an STA was denied by MAC filters. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.42.6.5.0.4 |
atkkWiAcRadiusAuthSucceededThis notification is sent when RADIUS authentication of an STA succeeded. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.42.6.5.0.5 |
atkkWiAcRadiusAuthFailedThis notification is sent when RADIUS authentication of an STA failed. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.42.6.5.0.6 |
atkkWiAcRadarDetectedThis notification is sent when Radar detected. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.42.6.5.0.7 |
atkkWiAcApInfoAP information OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.42.6.6 |
atkkWiAcApInfoTrapTableTable that contains information about a trap configuration of this AP. SEQUENCE OF AtkkWiAcApInfoTrapEntry .1.3.6.1.4.1.207.8.42.6.6.1 |
atkkWiAcApInfoTrapEntryInformation about a trap configuration. AtkkWiAcApInfoTrapEntry .1.3.6.1.4.1.207.8.42.6.6.1.1 |
atkkWiAcApTrapHostTrapHost configuration of this AP.ro TrapHostString .1.3.6.1.4.1.207.8.42.6.6.1.1.1 |
atkkWiAcApTrapCommunityTrapCommunity configuration of this AP.ro CommunityString .1.3.6.1.4.1.207.8.42.6.6.1.1.2 |
atkkWiAcApTrapColdStartConfigEnable/disable configuration of the ColdStart trap.ro Enumeration .1.3.6.1.4.1.207.8.42.6.6.1.1.3 |
atkkWiAcApTrapLinkConfigEnable/disable configuration of the Link up/down trap.ro Enumeration .1.3.6.1.4.1.207.8.42.6.6.1.1.4 |
atkkWiAcApTrapAuthenticationConfigEnable/disable configuration of the Authentication trap.ro Enumeration .1.3.6.1.4.1.207.8.42.6.6.1.1.5 |
atkkWiAcApTrapAssociationConfigEnable/disable configuration of an STA Association/Disassociation trap.ro Enumeration .1.3.6.1.4.1.207.8.42.6.6.1.1.6 |
atkkWiAcApTrapUnknownApConfigEnable/disable configuration of an Unknown AP detection trap.ro Enumeration .1.3.6.1.4.1.207.8.42.6.6.1.1.7 |
atkkWiAcApTrapFilteredStaConfigEnable/disable configuration of a Filtered STA detection trap.ro Enumeration .1.3.6.1.4.1.207.8.42.6.6.1.1.8 |
atkkWiAcApTrapRadiusAuthSuccessConfigEnable/disable configuration of the RADIUS Authentication success trap.ro Enumeration .1.3.6.1.4.1.207.8.42.6.6.1.1.9 |
atkkWiAcApTrapRadiusAuthFailConfigEnable/disable configuration of the RADIUS Authentication fail trap.ro Enumeration .1.3.6.1.4.1.207.8.42.6.6.1.1.10 |
atkkWiAcApTrapDfsDetectedConfigEnable/disable configuration of the DFS Detected trap.ro Enumeration .1.3.6.1.4.1.207.8.42.6.6.1.1.11 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →AT-UWC-WLAN-SWITCH-MIB
The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
1459 objects→
AtiEdgeSwitch-MIB
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
924 objects→
ALLIEDTELESYN-MIB
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
772 objects→
AT-BOARDS-MIB
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
328 objects→
SWITCH-ATM-MIB
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
263 objects→
AtiL2-MIB
Standard SNMP MIB module defining data structures for AtiL2-MIB.
239 objects→