MULTIPLE-BRIDGE-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
Imported Objects
Objects
31 total| Object Name |
|---|
ati OBJECT IDENTIFIER .1.3.6.1.4.1.207 |
RFC1213-MIB Unknown .1.3.6.1.4.1.207 |
mibobjs OBJECT IDENTIFIER .1.3.6.1.4.1.207.8 |
atiSwitchObjs OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.3 |
atiSystemConfig OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.3.1 |
atiSysSerialnoSerial number.ro DisplayString .1.3.6.1.4.1.207.8.3.1.1 |
atiSysTftpIPAddressTFTP Server IP address.rw NetworkAddress .1.3.6.1.4.1.207.8.3.1.2 |
atiSysTftpFilenameTFTP file name.rw DisplayString .1.3.6.1.4.1.207.8.3.1.3 |
atiSysPowerupCountPowerup Count.ro INTEGER .1.3.6.1.4.1.207.8.3.1.4 |
atiSysBrcastCutoffRateBroadcast Cutoff Rate. (0..100000)rw INTEGER .1.3.6.1.4.1.207.8.3.1.5 |
atiSysGatewayIPAddressGateway IP address.rw NetworkAddress .1.3.6.1.4.1.207.8.3.1.6 |
atiPortTableThe port setup table. SEQUENCE OF AtiPortentry .1.3.6.1.4.1.207.8.3.2 |
atiPortEntryThe port setup entry. AtiPortentry .1.3.6.1.4.1.207.8.3.2.1 |
atiPortA number from 1 to number of ports on the switch.ro INTEGER .1.3.6.1.4.1.207.8.3.2.1.1 |
atiPortStatusPort status.ro Enumeration .1.3.6.1.4.1.207.8.3.2.1.2 |
atiPortDuplexStatusPort duplex status.rw Enumeration .1.3.6.1.4.1.207.8.3.2.1.3 |
atiPortForwardedFramesNumber of frames received on this port and forwarded to another port on the system module for processing.ro Counter .1.3.6.1.4.1.207.8.3.2.1.4 |
atiPortRcvdLocalFramesNumber of frames received where the destination is on this port.ro Counter .1.3.6.1.4.1.207.8.3.2.1.5 |
atiSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.3.3 |
atiSwitchIPAddressSince bridges can now be accessed without an IP address,
there needs to be a way to find out there addresses.rw NetworkAddress .1.3.6.1.4.1.207.8.3.3.1 |
atiSwitchSubnetMaskThe switch's submask.rw NetworkAddress .1.3.6.1.4.1.207.8.3.3.2 |
atiActiveAgingTimeActive Aging Time.rw INTEGER .1.3.6.1.4.1.207.8.3.3.3 |
atiPurgeAgingTimePurge Aging Time.rw INTEGER .1.3.6.1.4.1.207.8.3.3.4 |
atiSwitchSTPStatusThe switch's Spanning Tree status, enter ON or OFF.rw Enumeration .1.3.6.1.4.1.207.8.3.3.5 |
atiSwitchManager OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.3.3.6 |
atiSwitchTrapRcvr1The 1th SNMP Trap Destination.rw NetworkAddress .1.3.6.1.4.1.207.8.3.3.6.1 |
atiSwitchTrapRcvr2The 2th SNMP Trap Destination.rw NetworkAddress .1.3.6.1.4.1.207.8.3.3.6.2 |
atiSwitchTrapRcvr3The 3th SNMP Trap Destination.rw NetworkAddress .1.3.6.1.4.1.207.8.3.3.6.3 |
atiSwitchTrapRcvr4The 4th SNMP Trap Destination.rw NetworkAddress .1.3.6.1.4.1.207.8.3.3.6.4 |
atiSwitchPortMirroringThe switch's Port Mirroring status, enter ENABLE or DISABLE.rw Enumeration .1.3.6.1.4.1.207.8.3.3.7 |
atiSwitchMirroredPortThe Port to be mirrored.rw INTEGER .1.3.6.1.4.1.207.8.3.3.8 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.