ATI-BRIDGE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ATI-BRIDGE-MIB.
64
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
64 total| Object Name |
|---|
alliedTelesyn OBJECT IDENTIFIER .1.3.6.1.4.1.207 |
RFC1155-SMI Unknown .1.3.6.1.4.1.207 |
mibObject OBJECT IDENTIFIER .1.3.6.1.4.1.207.8 |
switchMib OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.5 |
atiBridgeMib OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.5.10 |
atbrBase OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.5.10.1 |
atbrBaseTableTable of basic bridge information. SEQUENCE OF AtbrBaseEntry .1.3.6.1.4.1.207.8.5.10.1.1 |
atbrBaseEntryAn entry in the atbrBaseTable. AtbrBaseEntry .1.3.6.1.4.1.207.8.5.10.1.1.1 |
atbrBaseLanIdThis object uniquely identifies the lan or
emulated lan.ro INTEGER .1.3.6.1.4.1.207.8.5.10.1.1.1.1 |
atbrBaseBridgeAddressThe MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with atbrStpPriority a unique
BridgeIdentifier is formed which is used in the
Spanning Tree Protocol.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.5.10.1.1.1.2 |
atbrBaseNumPortsThe number of ports controlled by this bridging
entity.ro INTEGER .1.3.6.1.4.1.207.8.5.10.1.1.1.3 |
atbrBaseTypeIndicates what type of bridging this bridge can
perform. If a bridge is actually performing a
certain type of bridging this will be indicated by
entries in the port table for the given type.ro Enumeration .1.3.6.1.4.1.207.8.5.10.1.1.1.4 |
atbrBasePortTableA table that contains generic information about
every port that is associated with this bridge.
Transparent, source-route, and srt ports are
included. SEQUENCE OF AtbrBasePortEntry .1.3.6.1.4.1.207.8.5.10.1.4 |
atbrBasePortEntryA list of information for each port of the
bridge. AtbrBasePortEntry .1.3.6.1.4.1.207.8.5.10.1.4.1 |
atbrBasePortLanIdThis object uniquely identifies the lan or
emulated lan.ro INTEGER .1.3.6.1.4.1.207.8.5.10.1.4.1.1 |
atbrBasePortThe port number of the port for which this entry
contains bridge management information.ro INTEGER .1.3.6.1.4.1.207.8.5.10.1.4.1.2 |
atbrBasePortIfIndexThe value of the instance of the ifIndex object,
defined in MIB-II, for the interface corresponding
to this port.ro INTEGER .1.3.6.1.4.1.207.8.5.10.1.4.1.3 |
atbrBasePortCircuitFor a port which (potentially) has the same value
of atbrBasePortIfIndex as another port on the
same bridge, this object contains the name of an
object instance unique to this port. For example,
in the case where multiple ports correspond one-
to-one with multiple X.25 virtual circuits, this
value might identify an (e.g., the first) object
instance associated with the X.25 virtual circuit
corresponding to this port.
For a port which has a unique value of
atbrBasePortIfIndex, this object can have the
value { 0 0 }.ro OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.5.10.1.4.1.4 |
atbrBasePortDelayExceededDiscardsThe number of frames discarded by this port due
to excessive transit delay through the bridge. It
is incremented by both transparent and source
route bridges.ro Counter .1.3.6.1.4.1.207.8.5.10.1.4.1.5 |
atbrBasePortMtuExceededDiscardsThe number of frames discarded by this port due
to an excessive size. It is incremented by both
transparent and source route bridges.ro Counter .1.3.6.1.4.1.207.8.5.10.1.4.1.6 |
atbrStp OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.5.10.2 |
atbrStpTableTable of bridge spanning tree information. SEQUENCE OF AtbrStpEntry .1.3.6.1.4.1.207.8.5.10.2.1 |
atbrStpEntryAn entry in the atbrStpTable. AtbrStpEntry .1.3.6.1.4.1.207.8.5.10.2.1.1 |
atbrStpLanIdThis object uniquely identifies the lan or
emulated lan.ro INTEGER .1.3.6.1.4.1.207.8.5.10.2.1.1.1 |
atbrStpProtocolSpecificationAn indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined.ro Enumeration .1.3.6.1.4.1.207.8.5.10.2.1.1.2 |
atbrStpPriorityThe value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
atbrBaseBridgeAddress.rw INTEGER .1.3.6.1.4.1.207.8.5.10.2.1.1.3 |
atbrStpTimeSinceTopologyChangeThe time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.207.8.5.10.2.1.1.4 |
atbrStpTopChangesThe total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.ro Counter .1.3.6.1.4.1.207.8.5.10.2.1.1.5 |
atbrStpDesignatedRootThe bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId .1.3.6.1.4.1.207.8.5.10.2.1.1.6 |
atbrStpRootCostThe cost of the path to the root as seen from
this bridge.ro INTEGER .1.3.6.1.4.1.207.8.5.10.2.1.1.7 |
atbrStpRootPortThe port number of the port which offers the
lowest cost path from this bridge to the root
bridge.ro INTEGER .1.3.6.1.4.1.207.8.5.10.2.1.1.8 |
atbrStpMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro Timeout .1.3.6.1.4.1.207.8.5.10.2.1.1.9 |
atbrStpHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.ro Timeout .1.3.6.1.4.1.207.8.5.10.2.1.1.10 |
atbrStpHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro INTEGER .1.3.6.1.4.1.207.8.5.10.2.1.1.11 |
atbrStpForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
atbrStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]ro Timeout .1.3.6.1.4.1.207.8.5.10.2.1.1.12 |
atbrStpBridgeMaxAgeThe value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
atbrStpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.207.8.5.10.2.1.1.13 |
atbrStpBridgeHelloTimeThe value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds.rw Timeout .1.3.6.1.4.1.207.8.5.10.2.1.1.14 |
atbrStpBridgeForwardDelayThe value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
atbrStpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.207.8.5.10.2.1.1.15 |
atbrStpPortTableA table that contains port-specific information
for the Spanning Tree Protocol. SEQUENCE OF AtbrStpPortEntry .1.3.6.1.4.1.207.8.5.10.2.15 |
atbrStpPortEntryA list of information maintained by every port
about the Spanning Tree Protocol state for that
port. AtbrStpPortEntry .1.3.6.1.4.1.207.8.5.10.2.15.1 |
atbrStpPortLanIdThis object uniquely identifies the lan or
emulated lan.ro INTEGER .1.3.6.1.4.1.207.8.5.10.2.15.1.1 |
atbrStpPortThe port number of the port for which this entry
contains Spanning Tree Protocol management
information.ro INTEGER .1.3.6.1.4.1.207.8.5.10.2.15.1.2 |
atbrStpPortPriorityThe value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
atbrStpPort.rw INTEGER .1.3.6.1.4.1.207.8.5.10.2.15.1.3 |
atbrStpPortStateThe port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see atbrStpPortEnable), this object
will have a value of disabled(1).ro Enumeration .1.3.6.1.4.1.207.8.5.10.2.15.1.4 |
atbrStpPortEnableThe enabled/disabled status of the port.rw Enumeration .1.3.6.1.4.1.207.8.5.10.2.15.1.5 |
atbrStpPortPathCostThe contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN.rw INTEGER .1.3.6.1.4.1.207.8.5.10.2.15.1.6 |
atbrStpPortDesignatedRootThe unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId .1.3.6.1.4.1.207.8.5.10.2.15.1.7 |
atbrStpPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.ro INTEGER .1.3.6.1.4.1.207.8.5.10.2.15.1.8 |
atbrStpPortDesignatedBridgeThe Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.ro BridgeId .1.3.6.1.4.1.207.8.5.10.2.15.1.9 |
atbrStpPortDesignatedPortThe Port Identifier of the port on the Designated
Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.207.8.5.10.2.15.1.10 |
atbrStpPortForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter .1.3.6.1.4.1.207.8.5.10.2.15.1.11 |
atbrSr OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.5.10.3 |
atbrTp OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.5.10.4 |
atbrTpTableTable of transparent bridging information. SEQUENCE OF AtbrTpEntry .1.3.6.1.4.1.207.8.5.10.4.1 |
atbrTpEntryAn entry in the atbrTpTable. AtbrTpEntry .1.3.6.1.4.1.207.8.5.10.4.1.1 |
atbrTpLanIdThis object uniquely identifies the lan or
emulated lan.ro INTEGER .1.3.6.1.4.1.207.8.5.10.4.1.1.1 |
atbrTpLearnedEntryDiscardsThe total number of Forwarding Database entries,
which have been or would have been learnt, but
have been discarded due to a lack of space to
store them in the Forwarding Database. If this
counter is increasing, it indicates that the
Forwarding Database is regularly becoming full (a
condition which has unpleasant performance effects
on the subnetwork). If this counter has a
significant value but is not presently increasing,
it indicates that the problem has been occurring
but is not persistent.ro Counter .1.3.6.1.4.1.207.8.5.10.4.1.1.2 |
atbrTpAgingTimeThe timeout period in seconds for aging out
dynamically learned forwarding information.
802.1D-1990 recommends a default of 300 seconds.rw INTEGER .1.3.6.1.4.1.207.8.5.10.4.1.1.3 |
atbrTpFdbTableA table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame. SEQUENCE OF AtbrTpFdbEntry .1.3.6.1.4.1.207.8.5.10.4.3 |
atbrTpFdbEntryInformation about a specific unicast MAC address
for which the bridge has some forwarding and/or
filtering information. AtbrTpFdbEntry .1.3.6.1.4.1.207.8.5.10.4.3.1 |
atbrTpFdbLanIdThis object uniquely identifies the lan or
emulated lan.ro INTEGER .1.3.6.1.4.1.207.8.5.10.4.3.1.1 |
atbrTpFdbAddressA unicast MAC address for which the bridge has
forwarding and/or filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.5.10.4.3.1.2 |
atbrTpFdbPortEither the value '0', or the port number of the
port on which a frame having a source address
equal to the value of the corresponding instance
of atbrTpFdbAddress has been seen. A value of
'0' indicates that the port number has not been
learned but that the bridge does have some
forwarding/filtering information about this
address (e.g. in the atbrStaticTable).
Implementors are encouraged to assign the port
value to this object whenever it is learned even
for addresses for which the corresponding value of
atbrTpFdbStatus is not learned(3).ro INTEGER .1.3.6.1.4.1.207.8.5.10.4.3.1.3 |
atbrStatic OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.5.10.5 |