AT-PRI-MIB
The AT-PRI-MIB facilitates the monitoring and management of Primary Rate Interface (PRI) telephony circuits by exposing performance counters and status indicators for ISDN D-channel signaling and B-channel traffic. It enables administrators to track interface availability, error rates, and call setup failures on T1/E1 PRI modules to diagnose connectivity and signaling issues in legacy voice networks.
Imported Objects
Objects
16 total| Object Name |
|---|
priThis MIB file contains definitions of managed objects for the PRI module. MODULE-IDENTITY .1.3.6.1.4.1.207.8.4.4.4.42 |
priIntTableThe table of PRI interfaces. SEQUENCE OF PriIntEntry .1.3.6.1.4.1.207.8.4.4.4.42.1 |
priIntEntryA single entry in the PRI interfaces table. PriIntEntry .1.3.6.1.4.1.207.8.4.4.4.42.1.1 |
priIntIndexThe ifIndex of the PRI interface.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.42.1.1.1 |
priIntBoardIndexThe index in the arBoardTable of the board on which this PRI interface resides.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.42.1.1.2 |
priIntBoardPositionThe position on this PRI interface's board of this PRI interface.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.42.1.1.3 |
priIntModeThe mode of operation of this PRI interface. The value isdn means that the entire interface is operating as an ISDN interface, the value tdm means that the entire interface is operating as TDM groups and the value mixed means that some channels in the interface are dedicated to ISDN and some to TDM groups.ro Enumeration .1.3.6.1.4.1.207.8.4.4.4.42.1.1.4 |
priIntTdmChannelMapA bit map of the channels in the PRI interface which are dedicated to TDM. PRI channels are numbered from 0 to 31, 0 is unused, 16 (E1) or 24 (T1) is the D channel. The map values are 2 to the power of the channel number.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.42.1.1.5 |
priIntIsdnChannelMapA bit map of the channels in the PRI interface which are dedicated to ISDN. PRI channels are numbered from 0 to 31, 0 is unused, 16 (E1) or 24 (T1) is the D channel. The map values are 2 to the power of the channel number.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.42.1.1.6 |
priIntTypeThe type of primary rate interface. E1 has 30 B + D channel, T1 has 23 B + D channel. If the value unknown is returned for this object, the exact PRI type has not yet been determined.ro Enumeration .1.3.6.1.4.1.207.8.4.4.4.42.1.1.7 |
priChanTableThe table of channels on PRI interfaces. SEQUENCE OF PriChanEntry .1.3.6.1.4.1.207.8.4.4.4.42.2 |
priChanEntryA single entry in the PRI channels table. PriChanEntry .1.3.6.1.4.1.207.8.4.4.4.42.2.1 |
priChanIntIndexThe ifIndex of the PRI interface.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.42.2.1.1 |
priChanChannelIndexThe channel index of the PRI channel. Valid channels have indices from 1 to 31. The D channel on an E1 interface has index 16, the D channel on a T1 interface has index 24.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.42.2.1.2 |
priChanModeThe mode of this PRI channel. The value isdn means that the channel is reserved for use in ISDN calls. The value tdm means that the channel is reserved for use by TDM. For the D channel, this object will usually have the value isdn. An exception is if the interface is running common D channel mode and the D channel is reserved for TDM.ro Enumeration .1.3.6.1.4.1.207.8.4.4.4.42.2.1.3 |
priChanStateThe state of this PRI channel. The value inactive means that the channel does not currently have an active user, either an ISDN call or an active TDM group. The value active means that the channel is in use, either by an ISDN call or an active TDM group.ro Enumeration .1.3.6.1.4.1.207.8.4.4.4.42.2.1.4 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.