AT-CHASSIS-MIB
The AT-CHASSIS-MIB enables monitoring of physical chassis hardware status and generates trap notifications for critical events such as power supply failures, fan faults, or module insertions/removals on Allied Telesis chassis-based network devices.
Imported Objects
Objects
14 total| Object Name |
|---|
chassisSupport for accessing trap notifications on chassis based products. MODULE-IDENTITY .1.3.6.1.4.1.207.8.4.4.3.23 |
chassisNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.3.23.0 |
chassisCardRoleChangeNotifyA notification generated when the CFC's role is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.23.0.1 |
chassisCardJoinNotifyA notification generated when a card connects to the CFC. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.23.0.2 |
chassisCardLeaveNotifyA notification generated when a card detaches from the CFC. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.23.0.3 |
slotNumberSlot number of the card that has changed.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.23.0.4 |
chassisRoleCFC's role in the chassis.ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.23.0.5 |
chassisCardTableA list of cards presented on the device. SEQUENCE OF ChassisCardEntry .1.3.6.1.4.1.207.8.4.4.3.23.1 |
chassisCardEntryA table entry containing information about a card. ChassisCardEntry .1.3.6.1.4.1.207.8.4.4.3.23.1.1 |
chassisCardSlotThe slot number the card is in.ro INTEGER .1.3.6.1.4.1.207.8.4.4.3.23.1.1.1 |
chassisCardBoardOIDThe OID value used to identify the type of board that is defined in the alliedTelesis's 'boards' enterprise MIB. If the board is provisioned or an unsupported hardware, this object will have the value of 0 0.ro OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.3.23.1.1.2 |
chassisCardNameThe name of the card. E.g. AT-SBx81CFC400, AT-SBx81CFC960 for controller cards; AT-SBx81GP24, AT-SBx81GT24, AT-SBx81GS24, AT-SBx81XS6 for line cards; 'unknown' for unsupported hardware.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.3.23.1.1.3 |
chassisCardStateThe current state of the card. The valid state is in one of the following: unknown(1), configuring(2), syncing(3), online(4), syncingFirmware(5), joining(6), incompatibleSW(7), disabled(8), initializing(9), booting(10), unsupportedHW(11) or provisioned(12).ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.23.1.1.4 |
chassisCardControllerStateThe current state of the controller card, in addition to the card state. The valid state is in one of the following: unknown(1), active(2) or standby(3).ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.23.1.1.5 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.