AT-FLASH-MIB
The AT-FLASH-MIB facilitates SNMP-based monitoring and management of non-volatile flash memory resources, specifically tracking wear-leveling statistics, block availability, and write/erase cycle counts on Access Telecom network devices. This module enables administrators to proactively detect flash degradation and prevent storage-related service interruptions by exposing low-level memory health metrics.
Imported Objects
Objects
16 total| Object Name |
|---|
flashThis MIB file contains definitions of managed objects for the FLASH module. MODULE-IDENTITY .1.3.6.1.4.1.207.8.4.4.4.31 |
flashTrap OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.31.0 |
flashFailureTrapA flash failure trap is generated when any of the above flash counter is incremented and the failure type is sent in the trap. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.4.31.0.1 |
flashGetFailureThe number of flash get operations that have failed.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.1 |
flashOpenFailureThe number of flash open operations that have failed.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.2 |
flashReadFailureThe number of flash read operations that have failed.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.3 |
flashCloseFailureThe number of flash close operations that have failed.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.4 |
flashCompleteFailureThe number of flash complete operations that have failed.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.5 |
flashWriteFailureThe number of flash write operations that have failed.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.6 |
flashCreateFailureThe number of flash create operations that have failed.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.7 |
flashPutFailureThe number of flash put operations that have failed.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.8 |
flashDeleteFailureThe number of flash delete operations that have failed.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.9 |
flashCheckFailureThe number of flash check operations that have failed.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.10 |
flashEraseFailureThe number of flash erase operations that have failed.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.11 |
flashCompactFailureThe number of flash compaction operations that have failed.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.12 |
flashVerifyFailureThe number of flash verify operations that have failed.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.13 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.