AT-ETH-MIB
The AT-ETH-MIB module enables SNMP-based monitoring and management of Ethernet interface statistics, including port status, traffic counters, and error rates, specifically for Allied Telesis network hardware.
Imported Objects
Objects
11 total| Object Name |
|---|
ethernetThis MIB file contains definitions of managed objects for the ethernet module. MODULE-IDENTITY .1.3.6.1.4.1.207.8.4.4.4.23 |
ethernetTraps OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.23.0 |
ethernetTrapAn ethernet trap is generated when the administrator sets the bandwidth on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.4.23.0.1 |
ethIntTableThe table of Ethernet interfaces. SEQUENCE OF EthIntEntry .1.3.6.1.4.1.207.8.4.4.4.23.1 |
ethIntEntryA single entry in the Ethernet interfaces table. EthIntEntry .1.3.6.1.4.1.207.8.4.4.4.23.1.1 |
ethIntIndexThe ifIndex of the Ethernet interface.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.23.1.1.1 |
ethIntBoardIndexThe index in the arBoardTable of the board on which this Ethernet interface resides. If this Ethernet interface is not found, the value of this object is 0.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.23.1.1.2 |
ethIntBoardPositionThe position on this Ethernet interface's board of this Ethernet interface. If this Ethernet interface is not found, the value of this object is 0.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.23.1.1.3 |
ethIntDuplexModeThe duplex mode of this Ethernet interface. The value unknown is returned when the interface cannot or has not yet made a determination of its duplex mode, or when the interface cannot be found.ro Enumeration .1.3.6.1.4.1.207.8.4.4.4.23.1.1.4 |
ethBandwidthThe bandwidth set on this Ethernet interface specified in kbps.ro Integer32 .1.3.6.1.4.1.207.8.4.4.4.23.1.1.5 |
ethernetTrapMessageThe last message sent in an ethernet TRAP. This variable is really just a placeholder for the object sent in the ethernet TRAP, but can be read independently if required. Note however that a new TRAP will cause this variable to be overwritten.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.23.2 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.