AT-XEM-MIB
The AT-XEM-MIB provides SNMP objects to monitor the operational status, configuration parameters, and performance metrics of XEM (Xpress Encryption Module) hardware components installed within the device. This module enables administrators to track encryption engine health, session throughput, and error counters for cryptographic acceleration units.
Imported Objects
Objects
14 total| Object Name |
|---|
xemThe AT-XEM MIB contains objects for monitoring
XEMs installed in the device. MODULE-IDENTITY .1.3.6.1.4.1.207.8.4.4.3.11 |
xemNumOfXemThe total number of XEMs installed in the device. If devices are stacked,
it is the total number of XEMs installed in the stacked devices.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.11.1 |
xemInfoTableA table of information about XEMs. Each entry in the table
represents a XEM installed in the system. SEQUENCE OF XemInfoEntry .1.3.6.1.4.1.207.8.4.4.3.11.2 |
xemInfoEntryInformation about a single XEM. XemInfoEntry .1.3.6.1.4.1.207.8.4.4.3.11.2.1 |
xemInfoMemberIdThe ID of the stack member where the XEM is installed.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.11.2.1.1 |
xemInfoBayIdThe bay number where the XEM is installed.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.11.2.1.2 |
xemInfoXemIdThe board identity of the XEM.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.11.2.1.3 |
xemInfoBoardTypeThe board type of the XEM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.3.11.2.1.4 |
xemInfoBoardNameThe board name of the XEM.ro DisplayString .1.3.6.1.4.1.207.8.4.4.3.11.2.1.5 |
xemInfoRevisionThe board revision number of the XEM.ro DisplayString .1.3.6.1.4.1.207.8.4.4.3.11.2.1.6 |
xemInfoSerialNumberThe board serial number of the XEM.ro DisplayString .1.3.6.1.4.1.207.8.4.4.3.11.2.1.7 |
xemInsertedA trap generated when a XEM is inserted into the device. NOTIFICATION-TYPE .xemTraps.1 |
xemRemovedA trap generated when a XEM is removed from the device. NOTIFICATION-TYPE .xemTraps.2 |
xemInsertedFailA trap generated when the insertion of a XEM into the device fails. NOTIFICATION-TYPE .xemTraps.3 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.