CENTRECOM-TRAP-MIB
Standard SNMP MIB module defining data structures for CENTRECOM-TRAP-MIB.
Imported Objects
Objects
8 total| Object Name |
|---|
RFC1213-MIBA overheat trap indicates that the on board
tempature sensor has reported a overheat
condition. System will shutdown until unit has
sufficiently cooled such that operation may begin
again. A cold start trap will be issued when
the unit has come back on line. TRAP-TYPE .1.3.6.1.4.1.207.8.12.2.0.6 |
fanfailedA fan failed trap indicates one or more of the
cooling fans inside the device has failed. A
fanOK trap will be sent once the fan has attained
normal operation. TRAP-TYPE .1.3.6.1.4.1.207.8.12.2.0.7 |
fanOKA fan has transitioned out of a failure state and
is now operating correctly. TRAP-TYPE .1.3.6.1.4.1.207.8.12.2.0.8 |
invalidLoginAttemptA user attempted to login to console or by telnet but was refused
access due to incorrect username or password TRAP-TYPE .1.3.6.1.4.1.207.8.12.2.0.9 |
powerSupplyFailOne or more sources of power to this agent has failed.
Presumably a redundant power-supply has taken over. TRAP-TYPE .1.3.6.1.4.1.207.8.12.2.0.10 |
powerSupplyGoodOne or more previously bad sources of power to this agent
has come back to life without causing an agent restart. TRAP-TYPE .1.3.6.1.4.1.207.8.12.2.0.11 |
rpsAlarmAttached Redundant Power Supply device is indicating
an alarm condition. TRAP-TYPE .1.3.6.1.4.1.207.8.12.2.0.12 |
rpsNoAlarmAttached Redundant Power Supply device is no longer
indicating an alarm condition. TRAP-TYPE .1.3.6.1.4.1.207.8.12.2.0.13 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.