FH800u-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
101
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
101 total| Object Name |
|---|
alliedTelesyn OBJECT IDENTIFIER .1.3.6.1.4.1.207 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.207.1 |
dualHub OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.10 |
fh812u OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.10.1 |
fh824u OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.10.2 |
mibObject OBJECT IDENTIFIER .1.3.6.1.4.1.207.8 |
repeaterMib OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1 |
newRepeaterMib OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20 |
acctonHubMIB OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3 |
atactDualHubMgt OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11 |
fh800uIntrusionHappenThere were some intruders on some port in this system TRAP-TYPE .1.3.6.1.4.1.207.8.1.20.3.11.0.1 |
fh800uMgt OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11.1 |
fh800uBasicCapability OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11.1.1 |
fh800uStackInfo OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1 |
stackInusedIPThe IP address currently used by the Dual-Speed Hub system.ro IpAddress .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.1 |
stackInusedNetMaskThe subnet maskcurrently used by the Dual-Speed Hub system.ro IpAddress .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.2 |
stackInusedGatewayThe prefered gateway used to send traps.ro IpAddress .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.3 |
stackInusedServerSlipAddrThe Server SLIP addresscurrently used by the Dual-Speed Hub
system.ro IpAddress .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.4 |
stackInusedHostSlipAddrThe Host SLIP address currently used by the Dual-Speed Hub
system.ro IpAddress .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.5 |
stackInusedBootUpIPThe Bootup IP address currently used by the Dual-Speed Hub
system. The Bootup IP must reside in the same subnet as the stackIP.ro IpAddress .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.6 |
stackTemporalIPUsed to change the IP address of the Dual-Speed Hub
system.rw IpAddress .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.7 |
stackTemporalNetMaskUsed to change the subnet mask of the Dual-Speed Hub
system.rw IpAddress .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.8 |
stackTemporalGatewayUsed to change the prefered gateway to send traps.rw IpAddress .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.9 |
stackTemporalServerSlipAddrUsed to change the Server SLIP address of the Dual-Speed Hub
system. The SLIP address must reside in the same subnet as the stackIP.rw IpAddress .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.10 |
stackTemporalHostSlipAddrUsed to change the Host SLIP address of the Dual-Speed Hub
system.rw IpAddress .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.11 |
stackTemporalBootUpIPUsed to change the Bootup IP address of the Dual-Speed Hub
system. The Bootup IP must reside in the same subnet as the stackIP.rw IpAddress .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.12 |
ipInformationResetSetting the stackIP, stackNetMask,stackGateway,
stackSlipAddr, and stackBootUpIP will not immediately enable parameters take
effect . They will take effect when ipInformationReset is set to reset(2).rw Enumeration .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.13 |
stackHealthMonitor< FOR fh800u Dual-Speed Hub DEFINITION : >
There are two kinds of hubs : 12 ports
need (1+ 12 + 1 + 1 + 1 + 1 +1 +1 +1) 20 bytes
and 24 ports
need (1+ 24 + 1 + 1 + 1 + 1 +1 +1 +1) 32 bytes
The maximun size :
256 bytes (total for 8 hubs)=8 hub * (1+ 24 + 1 + 1 + 1 +1 +1 +1 +1) bytes
|
byte256 byte255......................byte2 byte1
|
bit7 bit6 ... bit1 bit0
Use the first byte of each hub to indicate whether 20 or 32 bytes is used.
BYTE 1: total number of ports on a hub
00001100 : 12 ports
| |
bit7... bit0
00011000 : 24 ports
| |
bit7... bit0
For 12-port hub
BYTE 2 - 13 : port status for port 1 - 12
*BYTE 2 : port status for port 1
bit 0-4 : LED status
bit 0 : link status
0 - no link; 1 - link
bit 1 : partition status
0 - no part.; 1 - part.
bit 2 : port operation status
0 - disabled; 1 - enabled
bit 3-4 : port type status
00 - not present
01 - tenMb
10 - onehundredMb
11 - reserved
bit 5-7 : reserved
BYTE 14-25 :reserved
BYTE 26 : Expansion Port (EP) status1
bit 0-2: EP Type
000 - not present
100 - 100BASE-TX(ST) FEM
010 - 100BASE-TX(SC) FEM
1001 to 1111 - reserved
bit 3-4 : FEM forwarding mode status
Applicable only to FEM module
00 - adaptive cut through
01 - reserved
10 - reserved
11 - store and forward
bit 5: FEM back pressure status
0 - disabled; 1 - enabled
bit 6-7 : reserved
BYTE 27 : Expansion Port (EP) status2
bit 0-1 : LED status
bit 0 : FEM link status
0 - no link; 1 - link
bit 1 : FEM half/full duplex status
0 - full duplex; 1 - half duplex
bit 2 : EP collision led status
0 - off; 1 - on
bit 3-4 :
bit 3 : tx LED status
0 - off; 1 - tx on
bit 4 : rx LED status
0 - off; 1 - rx on
bit 5-7 : reserved
BYTE 28 : tenMb segment traffic/collision
bit 0-1 : tenMb traffic LED status
00 - no traffic
01 - low traffic
10 - middle traffic
11 - high traffic
bit 2-5 : tenMb collision LED status
0000 - none
0001 - 1 %
0010 - 3 %
0011 - 5 %
0100 - 10 %
0101 - >= 15 %
bit 6-7 : reserved
BYTE 29 : onehundredMb segment traffic/collision /Power/Switch LED status
bit 0-1 : onehundredMb traffic LED status
00 - no traffic
01 - low traffic
10 - middle traffic
11 - high traffic
bit 2-5 : onehundredMb collision LED status
0000 - none
0001 - 1 %
0010 - 3 %
0011 - 5 %
0100 - 10 %
0101 - >= 15 %
bit 6 : Power LED
0 - OFF; 1 - ON
bit 7 : Switch LED
0 - OFF; 1 - ON
BYTE 30 :SNMP agent & switch status
bit 0: internal switch bit
0 - not exist; 1 - exist
bit 1: internal switch status
0 - inactive; 1 - active
bit 2: expension switch bit
0 - bad; 1 - good
bit 3: expension switch status
0 - inactive; 1 - active
bit 4: agent bit
0 - not exist; 1 - exist
bit 5 : master status
0 - Slave; 1 - Master
bit 6 - 7 : reserved
BYTE 31 : Rmon status
bit 0 : rmon bit
0 - not exist; 1 - exist
bit 1 - 2 :rmon segment
00 - all stack
01 - segment tenMb
10 - segment onehundredMb
11 - reserved
bit 3 - 5 : RMON group Status
000 - not-present
001 - disabled
010 - Rmon-4Group
011 - Rmon-7Group
100 - Rmon-all
101 to 111 - reserved
bit 6 -7 : reserved
BYTE 32 : Hub Position(Hub ID)/Bus Termination
bit 0 - 3 : hub position
0000 - invalid
0001 - 1
0010 - 2
0011 - 3
0100 - 4
0101 - 5
0110 - 6
0111 - 7
1000 - 8
1001 to 1111 - reserved
bit 4 : termination status
0 - not end hub
1 - end hub in the stack
bit 5 - 7 : reserved
For 24-port hub
BYTE 2 - 25 : port status for port 1 - 24
*BYTE 2 : port status for port 1
bit 0-4 : LED status
bit 0 : link status
0 - no link; 1 - link
bit 1 : partition status
0 - no part.; 1 - part.
bit 2 : port operation status
0 - disabled; 1 - enabled
bit 3-4 : port type status
00 - not present
01 - tenMb
10 - onehundredMb
11 - reserved
bit 5-7 : reserved
BYTE 26 : Expansion Port (EP) status1
bit 0-2: EP Type
000 - not present
100 - 100BASE-TX(ST) FEM
010 - 100BASE-TX(SC) FEM
1001 to 1111 - reserved
bit 3-4 : FEM forwarding mode status
Applicable only to FEM module
00 - adaptive cut through
01 - reserved
10 - reserved
11 - store and forward
bit 5: FEM back pressure status
0 - disabled; 1 - enabled
bit 6-7 : reserved
BYTE 27 : Expansion Port (EP) status2
bit 0-1 : LED status
bit 0 : FEM link status
0 - no link; 1 - link
bit 1 : FEM half/full duplex status
0 - full duplex; 1 - half duplex
bit 2 : EP collision led status
0 - off; 1 - on
bit 3-4 :
bit 3 : tx LED status
0 - off; 1 - tx on
bit 4 : rx LED status
0 - off; 1 - rx on
bit 5-7 : reserved
BYTE 28 : tenMb segment traffic/collision
bit 0-1 : tenMb traffic LED status
00 - no traffic
01 - low traffic
10 - middle traffic
11 - high traffic
bit 2-5 : tenMb collision LED status
0000 - none
0001 - 1 %
0010 - 3 %
0011 - 5 %
0100 - 10 %
0101 - >= 15 %
bit 6-7 : reserved
BYTE 29 : onehundredMb segment traffic/collision /Power/Switch LED status
bit 0-1 : onehundredMb traffic LED status
00 - no traffic
01 - low traffic
10 - middle traffic
11 - high traffic
bit 2-5 : onehundredMb collision LED status
0000 - none
0001 - 1 %
0010 - 3 %
0011 - 5 %
0100 - 10 %
0101 - >= 15 %
bit 6 : Power LED
0 - OFF; 1 - ON
bit 7 : Switch LED
0 - OFF; 1 - ON
BYTE 30 :SNMP agent & switch status
bit 0: internal switch bit
0 - not exist; 1 - exist
bit 1: internal switch status
0 - inactive; 1 - active
bit 2: expension switch bit
0 - bad; 1 - good
bit 3: expension switch status
0 - inactive; 1 - active
bit 4: agent bit
0 - not exist; 1 - exist
bit 5 : master status
0 - Slave; 1 - Master
bit 6 - 7 : reserved
BYTE 31 : Rmon status
bit 0 : rmon bit
0 - not exist; 1 - exist
bit 1 - 2 :rmon segment
00 - all stack
01 - segment tenMb
10 - segment onehundredMb
11 - reserved
bit 3 - 5 : RMON group Status
000 - not-present
001 - disabled
010 - Rmon-4Group
011 - Rmon-7Group
100 - Rmon-all
101 to 111 - reserved
bit 6 -7 : reserved
BYTE 32 : Hub Position(Hub ID)/Bus Termination
bit 0 - 3 : hub position
0000 - invalid
0001 - 1
0010 - 2
0011 - 3
0100 - 4
0101 - 5
0110 - 6
0111 - 7
1000 - 8
1001 to 1111 - reserved
bit 4 : termination status
0 - not end hub
1 - end hub in the stack
bit 5 - 7 : reservedro OCTET STRING (SIZE (256) ) .1.3.6.1.4.1.207.8.1.20.3.11.1.1.1.14 |
fh800uGroupInfo OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2 |
groupTableA group means a hub unit SEQUENCE OF GroupEntry .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1 |
groupEntry GroupEntry .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1 |
groupIDThe ID number of a hub unit, used to select itro INTEGER .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.1 |
groupTypeType of hub unitro Enumeration .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.2 |
groupCounterResetWrite any value to this variable to reset the
counters of the hub unit. 2 is a value commonly
used to reset thingsrw Enumeration .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.3 |
groupPositionPhysical position of a hub unit in top-down order,
only supported if hardware permits such as
Dual-Speed Hub systemsro INTEGER .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.4 |
groupRptrHwVerHardware version of the repeater board.ro INTEGER .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.5 |
groupRptrSerialNoSerial number of the repeater board.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.6 |
groupSysMajorVerMicrocode major version of this hub.ro INTEGER .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.7 |
groupSysMinorVerMicrocode minor version of this hub.ro INTEGER .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.8 |
groupPostCodeMajorVerPOST microcode major version of this hub.ro INTEGER .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.9 |
groupPostCodeMinorVerPOST microcode minor version of this hub.ro INTEGER .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.10 |
groupAgentStatusStatus of this hub agent. Each stack allows
an SNMP primary agent.
primary(2): The agent in this stack is a primary agent.
backup(3): The agent in this stack is a backup agent.ro Enumeration .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.11 |
groupAgentHwVerHardware version of the agent board.ro INTEGER .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.12 |
groupAgentSerialNoSerial number of the agent board.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.13 |
groupAgentPhysAddrMAC address of this hub agentro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.14 |
groupAgentBootupOptionThis variable defines how to start the microcode
in the segment.
normal(1): Use NVRAM information and flash ROM
microcode to start up the system.
tftp-download(2):
Always download the new version of
microcode into RAM and start it.
bootp-get-ip(3):
Get the IP information from the BootP
server, and then start up the microcode in
flash ROM.
bootp-download(4):
Get the IP information from the BootP
server, and then download the microcode from
the TFTP server.
bootp-upgrade(5):
Get the IP information from the BootP
server, and then download the microcode from
the TFTP server. After the download has
been completed, upgrade the microcode in
system flash ROM.rw Enumeration .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.15 |
groupAgentBaudrateBaud rate of the console portrw Enumeration .1.3.6.1.4.1.207.8.1.20.3.11.1.1.2.1.1.16 |
fh800uPortInfo OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11.1.1.3 |
portTableinformation about ports in a system.
Each port belongs to a group. SEQUENCE OF PortEntry .1.3.6.1.4.1.207.8.1.20.3.11.1.1.3.1 |
portEntry PortEntry .1.3.6.1.4.1.207.8.1.20.3.11.1.1.3.1.1 |
portGroupIDID of the hub unitro INTEGER ( 1..255 ) .1.3.6.1.4.1.207.8.1.20.3.11.1.1.3.1.1.1 |
portIDID of the port unitro INTEGER ( 1..255 ) .1.3.6.1.4.1.207.8.1.20.3.11.1.1.3.1.1.2 |
portSpeedEthernet connector type of a portro Enumeration .1.3.6.1.4.1.207.8.1.20.3.11.1.1.3.1.1.3 |
portSpeedConfigSelect the Ethernet connector type of a portrw Enumeration .1.3.6.1.4.1.207.8.1.20.3.11.1.1.3.1.1.4 |
portSegmtIDID of the Segment unitro INTEGER ( 1..255 ) .1.3.6.1.4.1.207.8.1.20.3.11.1.1.3.1.1.5 |
fh800uSegmentInfo OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11.1.1.4 |
fh800uRmonConfig OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11.1.1.5 |
nicAttachSegmentThe value represents the segment that the NIC is
attached to.rw INTEGER ( 0..255 ) .1.3.6.1.4.1.207.8.1.20.3.11.1.1.5.1 |
fullRmonSegmentThe value shows if the segment supports all rmon or
only 4 rmon groups.rw Enumeration .1.3.6.1.4.1.207.8.1.20.3.11.1.1.5.2 |
rmonConfigTableRMON configuration table information; the index is the
ID of of the segment the rmon montioring . SEQUENCE OF RmonConfigEntry .1.3.6.1.4.1.207.8.1.20.3.11.1.1.5.3 |
rmonConfigEntry RmonConfigEntry .1.3.6.1.4.1.207.8.1.20.3.11.1.1.5.3.1 |
rmonConfigSegmtIDID of the Segment rmon is montioring.ro INTEGER ( 1..255 ) .1.3.6.1.4.1.207.8.1.20.3.11.1.1.5.3.1.1 |
rmonConfigStatusStatus of this RMON segment.rw Enumeration .1.3.6.1.4.1.207.8.1.20.3.11.1.1.5.3.1.2 |
fh800uPerfMonCapability OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11.1.2 |
fh800uPerfMonSegmentInfo OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11.1.2.3 |
perfMonSegmentTable SEQUENCE OF PerfMonSegmentEntry .1.3.6.1.4.1.207.8.1.20.3.11.1.2.3.1 |
perfMonSegmentEntry PerfMonSegmentEntry .1.3.6.1.4.1.207.8.1.20.3.11.1.2.3.1.1 |
segmentPerfIDID used to select a segmentro INTEGER ( 1..255 ) .1.3.6.1.4.1.207.8.1.20.3.11.1.2.3.1.1.1 |
segmentCRCErrorsTotal CRC errors received by a segment.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.2.3.1.1.2 |
segmentAlignmentErrorsTotal frame alignment errors received by a
segmentro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.2.3.1.1.3 |
segmentCollisionsTotal collisions received in a segmentro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.2.3.1.1.4 |
segmentTotalPortIsolatesTotal isolated ports in a segment.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.2.3.1.1.5 |
segmentSymbolErrorsTotal frame symbol errors received by a segmentro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.2.3.1.1.6 |
fh800uSwitchCapability OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11.1.3 |
fh800uSwitchStatsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1 |
switchPortStatsTableThis table provides statistics on each port on each switch
module in the stack. Note that statistics for the external
port on media and switch/media modules are unavailable to the
agent and are reported as 0. Statistics for port 2 (the internal
10Mbps port) on media modules are also reported as 0. SEQUENCE OF SwitchPortStatsEntry .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1 |
switchPortStatsEntry SwitchPortStatsEntry .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1 |
switchPortStatsGroupIDThe group ID of the switch module port being referenced. If the
group is not present, or if there is no switch module installed
in the group, GetRequests and SetRequests are rejected with an
error-status of noSuchName(2). GetNextRequests skip entries for
nonexistent modules.ro INTEGER .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.1 |
switchPortStatsIDThe port ID of the switch module port being referenced. Port 1 is
always the internal 100Mbps port. Port 2 is always the internal
10Mbps port. Port 3 is always the external port. Note that port
2 is inactive on media modules and port 3 is inactive on internal
switch modules.
Note: Statistics for the external port are unavailable to the
agent and are reported as 0.ro INTEGER .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.2 |
switchPortReadableFramesThe number of valid frames received by the port.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.3 |
switchPortReadableOctetsThe number of octets (bytes) in all valid frames received
by the port.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.4 |
switchPortFCSErrorsThe number of valid-length frames received by the port that
had FCS (frame check sequence) errors.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.5 |
switchPortAlignmentErrorsThe number of valid-length frames received by the port that
had alignment errors.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.6 |
switchPortFramesTooLongThe number of frames received by the port that were longer
than 1518 bytes.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.7 |
switchPortShortEventsThe number of frames received by the port that were shorter
than 82 bits.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.8 |
switchPortRuntsThe number of frames received by the port that were longer
than 82 bits but shorter than 512 bits (64 bytes).ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.9 |
switchPortCollisionsThe number of collisions detected on the port.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.10 |
switchPortLateEventsThe number of collisions detected on the port that occurred
later than 512 bit-times into the transmission of a packet.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.11 |
switchPortVeryLongEventsThe number of times any activity continued for more than
4 to 7.5 milliseconds.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.12 |
switchPortDataRateMismatchesThe number of times the incoming data rate mismatched the local
clock source enough to cause a FIFO overflow or underflow.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.13 |
switchPortBroadcastPacketsThe number of good broadcast frames received by the port.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.14 |
switchPortMulticastPacketsThe number of good multicast (not broadcast) frames received
by the port.ro Counter .1.3.6.1.4.1.207.8.1.20.3.11.1.3.1.1.1.15 |
fh800uSecurityCapability OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11.1.5 |
fh800uSecurityInfo OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.11.1.5.3 |
securityPortTable SEQUENCE OF SecurityPortEntry .1.3.6.1.4.1.207.8.1.20.3.11.1.5.3.3 |
securityPortEntry SecurityPortEntry .1.3.6.1.4.1.207.8.1.20.3.11.1.5.3.3.1 |
securityPortGroupIDID of a hub unitro INTEGER .1.3.6.1.4.1.207.8.1.20.3.11.1.5.3.3.1.1 |
securityPortIDPort ID in a hub unitro INTEGER .1.3.6.1.4.1.207.8.1.20.3.11.1.5.3.3.1.2 |
securityPortAddrMAC addressrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.1.20.3.11.1.5.3.3.1.3 |
securityAutoLearnActionSetting this object to inactive(1) disables the
auto-learn function for the physical address authorized access
to this port. Once this object is set to active(2), the agent
will set the authorized address to 0 first and then start the
auto-learn process, and the hub will begin to read the source
address of the first incoming error-free frame. The source
address obtained will become the authorized address and the
object securityAuthorizedAddr will be changed accordingly.
When the authorized address has been learned successfully, the
status of this port will be reflected as learned(3). Otherwise
the status will remain as active(2).
Setting to the last value, learned(3), is not acceptable;
'snmpBadValue' will be returned.rw Enumeration .1.3.6.1.4.1.207.8.1.20.3.11.1.5.3.3.1.5 |
securityPortIntrusionSet this variable to set function active
or inactiverw Enumeration .1.3.6.1.4.1.207.8.1.20.3.11.1.5.3.3.1.6 |