MIB Catalog

This MIB contains the objects for managing Ethernet Virtual Interconnect(EVI).

This MIB module is for representing fabric login information.

This MIB module is intended for the management of Fibre Channel (FC) Name Server.

This MIB module is for the management of the Fibre Channel Ping functionality.

This MIB contains the objects for FC port security.

This MIB module is for the management of the Fibre Channel Trace Route functionality.

This MIB module is intended for management of FC(Fibre Channel) Zoning entities, including Basic Zoning Management and Enhanced Zoning Management.

This MIB module is for configuring and monitoring Fibre Channel over Ethernet (FCoE) related entities. This MIB defines a Virtual FC (VFC) Interface as an object that represents eit

This MIB module is for configuring and monitoring the working mode of FCoE (Fibre Channel over Ethernet) features.

This MIB module is for monitoring Fabric Device Management Interface (FDMI) related entities. This MIB module defines objects for managing the devices such as Host Bus Adapter (HBA). It provides devic

The MIB is designed to manage Firewall products.

This MIB contains objects to manage flash cards and flash card operations. There are no constraints on this MIB.

Flow template management information base.

This MIB contains objects to Manage configuration and Monitor running state for Class Based FR QoS feature.

this MIB will maintain Fabric topology management. The MIB includes unit-id, unit-name and fabric authentication information.

This MIB contains objects to Manage configuration and Monitor running state for GRE.

This MIB contains objects to manage the hpnicfhgmp operations, which are used on lanswitch products.

The objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specification.

This MIB describes IDS private information. IDS(Instruction Detecting System) is used to detect intruder activity.

This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users sh

Interface QoS management information base.

The MIB is designed to get statistic information of IKE tunnels. With this MIB, we can get information of a certain IKE tunnel or all IKE tunnels

All the configuration of the info center can be managed by info center MIB.

The MIB module for managing IPv4 address.

This MIB is objects used to describe IP broadcast features or functions. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire mor

This MIB is used to acquire ip accounting information. The hpnicfIpaAccountListTable is set by user to define the group of ip address which they want to account. This module can be enabled in each por

This MIB provides mechanisms to monitor all network elements(NE) in Ipran Data Communication Network.

The MIB is designed to get statistic information of IPSec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels.

The MIB is designed to get statistic information of IPsec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels.

The MIB module for managing IPv6 address

This MIB defines management information used on products which support ipx protocol. It includes 4 parts: 1.ipx interface configuration group - This group contains configurable management information

This MIB provides objects for upgrading images on modules in the system, objects for showing the result of an upgrade operation, and objects for showing the result of a test operation. To perform an u

The MIB module is used for l2 isolation.

This MIB contains objects to manage configuration of L2TP. There are no constraints on this MIB.

This MIB contains objects to manage L2VPN.

This MIB contains objects to manage PWE3.

See description above

LACP extend MIB.

The private mib file includes the loadbalance information of the device.

The private MIB file includes the LB information of the device.

Lawful Interception MIB

This MIB is used to manage license, including license key, activation key and activation file.

LLDP extended management infomation.

This MIB provides the definition of the local AAA Server.

Loops may cause broadcast storms. The purpose of loopback detection is to detect loops on the device and to protect the network.

The latest baseline.

MIB module

MIB module

MIB module

MIB module

MIB module

MIB module

This MIB defines objects for managing MSTP.

MIB module

Module node for qos and acl.

MIB module

MIB module

MIB module

MIB module

This MIB file is to provide the definition of the MAC Information general configuration. MAC Information feature is used to make that the changed MAC information in the monitored device is knowable in

The initial version of this MIB file.

This MIB contains objects to manage MDC (Multitenant Device Context) operations. Such as: 1. Configure MDCs for a device and display MDCs and their status. 2. Assign CPU, storage space, and memory spa

802.1ah MAC-in-MAC MIB

This MIB defines objects for managing mirror group.

The HPN-ICF-MP-MIB provides read access to MP(Multilink PPP) link status information. The information available through this MIB includes: the father

The HPN-ICF-MP-V2-MIB provides read access to MP(Multilink PPP) link status information. The information available through this MIB includes: the father channel, the bundled son channel, the slot on w

This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defined in : Rosen, E., Viswanathan, A., and

All rights reserved

This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, I

This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defined in : Rosen, E., Viswanathan, A., and

Multiprotocol Label Switching MIB

This MIB contains objects to configure OAM module. The Operation, Administration and Maintenance (OAM) is an effective means for decreasing the cost of network maintenance. The MPLS OAM is used to adm

This MIB contains objects to configure mpls protect-switch module.

Multiprotocol Label Switching Traffic Engineering MIB

The MPM (Multicast Port Management) MIB.

The multicast global configuration MIB

IGMP/MLD Snooping Management MIB

This MIB contains objects to manage configuration of NAT. There are no constraints on this MIB.

This MIB file is to provide the object definition of the network management parameters. These parameters are used to identify devices. It is useful for devices management in a dynamic address assignme

This MIB module is for the management of N_Port Virtualization or NPV within the framework of N_Port virtualization(NPV) architecture. N_Port virtualization reduces the number of Fibre Channel domain

The private MIB file includes the test information of the device. It is supplementary for rfc2925.txt.

This MIB contains objects to manage the configuration and status information of network traffic statistics. It classifies the IP packets by source IP address, source port, destination IP address, dest

This MIB provides mechanisms to monitor a NTP server.

The NVGRE MIB.

This MIB is used to acquire information from the agent. Before a NMS takes some actions, it is not sure whether the agent supports it or not. This MIB is used to solve this problem.

Object-policy management information base for managing devices that support object policy.

MIB module

This MIB file provides information about OSPF.

This MIB contains objects to manage the configuration and information of PBR. It routes IP packets by user defined policy other than normal destination address based routing.

This MIB is used to manage Port Extender (PEX) information. This MIB is applicable to products that support PEX.

The MIB module is used for managing port security.

The MIB module is used for managing portal.

This MIB is to provide the definition of the POSA (Point Of Sale Access) system.

Description.

This MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions.

The MIB module is used for PPPoE server.

MIB module

This MIB is used to manage and configure the priority of specified protocol. This MIB is applicable to routers, switches and other products.

This MIB contains the objects for managing the protocol-based VLAN configurations.

This MIB defines objects for managing Per-VLAN spanning tree (PVST).

802.1Q-in-Q MIB

802.1 QinQv2 MIB Version 1

H3C QoS management information base.

The private MIB file includes the general information QoS profile.

The HPN-ICF-RADIUS-MIB contains objects to Manage configuration and Monitor running state for RADIUS feature.

The MIB module is used for managing RCP protocol server.

This MIB is applicable to router-devices. It's made for RCR (Resilient Controllable Routing). RCR provides an effective resolution which can dynamically auto-adjust outbound traffic to the optimal ext

Redundancy group is concerned with ensuring minimal disruption to data and control planes in case of a failover. If one of the group-node in an IRF fails, the other group-node in the IRF takes over th

MIB module

The private MIB module for managing remote monitoring device implementations.

This MIB manages RPR(Resilient Packet Ring)interfaces by providing an operational table which controls parameters of each RPR interface and reports alarm conditions. A RPR ring is composed of two fibe

The RRPP (Rapid Ring Protection protocol) provides fast protection switching to layer 2 switches interconnected in an Ethernet ring topology. When a link in the ring breaks, the RRPP can recover the d

The objects in this MIB module are used to manage RS485 interfaces, and manage sessions on them.

The HPN-ICF-RSA-MIB contains objects to Manage RSA configuration.

This MIB module is for configuring and monitoring SAN (Storage Area Networks) aggregation group related MIB objects. This MIB can be used to add or delete a SAN aggregation group, and make one or more

The MIB is designed to manage sessions.

H3C service loopback group MIB.

This MIB defines objects for managing Smart Link. Smart Link is a feature developed to address the slow convergence issue with STP. It provides link redundancy and fast convergence in a dual uplink ne

The MIB module for management of specific Data Link Switching protocol enhancements. DLSw is described in RFC 1795, RFC 2024 and RFC2166.

This MIB file is to provide the object definition of the SNMP extended information.