HPN-ICF-RCR-MIB
This MIB is applicable to router-devices. It's made for RCR (Resilient Controllable Routing). RCR provides an effective resolution which can dynamically auto-adjust outbound traffic to the optimal external interface by monitoring the performance and traffic load of each external interface. It provides the functions of intelligentized traffic load distribution and the optimal external interface selection. This can optimally utilize the external interfaces. Furthermore, RCR realized the function which can select the optimal external interface based on different classes of operation flow.
Main OID:
hpnicfRcr.1.3.6.1.4.1.11.2.14.11.15.2.48
58
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
58 total| Object Name |
|---|
hpnicfRcrThis MIB is applicable to router-devices. It's made for RCR (Resilient Controllable Routing). RCR provides an effective resolution which can dynamically auto-adjust outbound traffic to the optimal external interface by monitoring the performance and traffic load of each external interface. It provides the functions of intelligentized traffic load distribution and the optimal external interface selection. This can optimally utilize the external interfaces. Furthermore, RCR realized the function which can select the optimal external interface based on different classes of operation flow. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.48 |
hpnicfRcrMR OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.48.1 |
hpnicfRcrMRGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.48.1.1 |
hpnicfRcrMRAllMaxUsedBandRateThe max used band rate of all external interfaces on member router-devices(MRs) which are controlled by RCR.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.1.1.1 |
hpnicfRcrMRAllMinUsedBandRateThe min used band rate of all external interfaces on MRs which are controlled by RCR.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.1.1.2 |
hpnicfRcrMRListenTimeThe persistent time of a probe on member router-device(MR) which is controlled by RCR.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.1.1.3 |
hpnicfRcrMRStateTableThis table contains state information of each MR which is controlled by RCR. SEQUENCE OF HpnicfRcrMRStateEntry .1.3.6.1.4.1.11.2.14.11.15.2.48.1.2 |
hpnicfRcrMRStateEntryEntry items HpnicfRcrMRStateEntry .1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1 |
hpnicfRcrMRNameThe name of MR which is controlled by RCR. OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.1 |
hpnicfRcrMRStateThe state of MR where identified on the controller router-device(CR). down: The MR has been enabled but has not connected to the CR with TCP connection. up: The MR has already successfully connected to the CR but has not been ready for adjusting route. controlled: The MR has already passed the consultation with the CR and could be controlled by it.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.2 |
hpnicfRcrMRAuthTypeThe authentication type of communication packet between CR and MR.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.3 |
hpnicfRcrMRAuthPwdThe authentication password of communication packet between CR and MR. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.4 |
hpnicfRcrMROutIfStateTableThis table contains the external interface states of each MR which is controlled by RCR. SEQUENCE OF HpnicfRcrMROutIfStateEntry .1.3.6.1.4.1.11.2.14.11.15.2.48.1.3 |
hpnicfRcrMROutIfStateEntryEntry items HpnicfRcrMROutIfStateEntry .1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1 |
hpnicfRcrMROutIfNameThe name of external interface on each MR. OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.1 |
hpnicfRcrMROutIfStateThe state of external interface on each MR.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.2 |
hpnicfRcrMROutIfMaxUsedBandRateThe max spendable bandwidth rate on external interface.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.3 |
hpnicfRcrMROutIfMinUsedBandRateThe min spendable bandwidth rate on external interface.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.4 |
hpnicfRcrMROutIfUsedBandRateThe used bandwidth rate on external interface.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.5 |
hpnicfRcrCR OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.48.2 |
hpnicfRcrCRGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.48.2.1 |
hpnicfRcrCRStateThe state of the CR which is controlled by RCR. down: The CR has been enabled but has not started a TCP connection server. init: The CR has started a TCP connection server and has been waiting for MR connection, but has not been ready for adjusting route. active: The CR is ready for adjusting route.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.1 |
hpnicfRcrCRPortNumThe communication port number between CR and MR.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.2 |
hpnicfRcrCRCtrlModeThe observe mode or control mode is configured to operate in the CR. observe: The CR monitors prefixes and external interfaces based on default and user-defined policies and then reports the status of the network and the decisions that should be made but does not implement any changes. controlled: The CR monitors prefixes and external interfaces based on default and user-defined policies and then reports the status of the network and the decisions that should be made and implement any changes.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.3 |
hpnicfRcrCRChooseModeThe algorithm used to choose an alternative external interface for a prefix. good: The first external interface that conforms to the policy is selected as the new external interface. best: Information is collected from all external interfaces and the best one is selected even though the best external interface may not be in-policy.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.4 |
hpnicfRcrCRKeepaliveTimeThe interval time of the transmission of the keepalive communication packet between CR and MR.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.5 |
hpnicfRcrCRPolicyModeThe chosen policy mode which decides to change what prefix. prefix: An RCR policy is designed to select IP prefixes or to select RCR learn policies using a match clause and then to apply RCR policy configurations using a set clause. operation: To deside to adjusted prefixes based on operation which user configured. study: To learn and optimize prefixes based on the highest throughput or the highest delay.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.6 |
hpnicfRcrCRStudyModeThe mode of collecting prefix in studying configuration mode. It's to collect either the prefix of max thoughtout or the prefix of max delay time. It doesn't have a value when CR isn't in studying configuration mode.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.7 |
hpnicfRcrCRStudyIpPrefixNumThe max number of collecting prefix in studying configuration mode.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.8 |
hpnicfRcrCRIpPrefixLenThe mask length of collecting prefix in configuration mode.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.9 |
hpnicfRcrCRRcrPolicyTableThis table contains objects to get statistic information of interfaces on a device. SEQUENCE OF HpnicfRcrCRRcrPolicyEntry .1.3.6.1.4.1.11.2.14.11.15.2.48.2.2 |
hpnicfRcrCRRcrPolicyEntryEntry items HpnicfRcrCRRcrPolicyEntry .1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1 |
hpnicfRcrCRRcrPlyIDThe ID of RCR policy which the user has configured. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.1 |
hpnicfRcrCRRcrPlyMatchIPListNameThe matched IP prefix list name of RCR policy which the user has configured.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.2 |
hpnicfRcrCRRcrPlyMatchStudyEnableWhether the RCR policy which the user has configured is matched for studying prefix mode.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.3 |
hpnicfRcrCRRcrPlyMatchOperPlyNameThe matched operation policy name of RCR policy which the user has configured.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.4 |
hpnicfRcrCRRcrAclNumberThe matched acl number of RCR operation policy which the user has configured.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.5 |
hpnicfRcrCRRcrPlyDelayTimeThe absolute maximum delay time. The range of values that can be configured is from 1 to 10000.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.6 |
hpnicfRcrCRRcrPlyLossRateThe packet loss percent of prefix which the CR concerns.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.7 |
hpnicfRcrCRMatPrefixPerfTableThis table contains the matched prefix performance information. SEQUENCE OF HpnicfRcrCRMatPrefixPerfEntry .1.3.6.1.4.1.11.2.14.11.15.2.48.2.3 |
hpnicfRcrCRMatPrefixPerfEntryEntry items HpnicfRcrCRMatPrefixPerfEntry .1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1 |
hpnicfRcrCRMatPrefPerfAddrTypeThe destination IP addresses type of matched prefix which the CR wants (IPv4 or IPv6). InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.1 |
hpnicfRcrCRMatPrefPerfDestIPAddrThe destination IP address of matched prefix which the CR wants. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.2 |
hpnicfRcrCRMatPrefPerfDestMaskLenThe destination IP address mask length of matched prefix which the CR wants. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.3 |
hpnicfRcrCRMatPrefPerfDelayTimeThe absolute maximum delay time of prefix which the CR has configured.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.4 |
hpnicfRcrCRMatPrefPerfLossRateThe packet loss percent of prefix which the CR has configured.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.5 |
hpnicfRcrCRMatPrefPerfThroughputThe bandwidth of prefix which the CR has monitored.ro Integer32 UNITS "kb" .1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.6 |
hpnicfRcrCRAdjustPrefixTableThis table contains objects to get adjusted prefix information which the CR controlled. SEQUENCE OF HpnicfRcrCRAdjustPrefixEntry .1.3.6.1.4.1.11.2.14.11.15.2.48.2.4 |
hpnicfRcrCRAdjustPrefixEntryEntry items HpnicfRcrCRAdjustPrefixEntry .1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1 |
hpnicfRcrCRAdjuPrefDestAddrTypeThe IP address type of the adjusted prefix which CR controlled (IPv4 or IPv6). InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.1 |
hpnicfRcrCRAdjuPrefDestAddrThe IP address of the adjusted prefix which CR controlled. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.2 |
hpnicfRcrCRAdjuPrefMaskLenThe IP address mask length of the adjusted prefix which CR controlled. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.3 |
hpnicfRcrCRAdjuPrefPreMRNameThe name of the MR which the previous outbound traffic flows through. OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.4 |
hpnicfRcrCRAdjuPrefPreOutIfNameThe name of the external interface on the MR which the previous outbound traffic flows through. OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.5 |
hpnicfRcrCRAdjuPrefCurMRNameThe name of the MR which the current outbound traffic flows through.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.6 |
hpnicfRcrCRAdjuPrefCurOutIfNameThe name of the external interface on the MR which the current outbound traffic flows through.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.7 |
hpnicfRcrCRAdjuPrefPersistTimeThe persisting time from the time which the adjusted outbound traffic has been adjusted by CR to now.ro Integer32 UNITS "second" .1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.8 |
hpnicfRcrCRAdjuPrefAgeTimeThe time which the adjusted prefix remains.ro Integer32 UNITS "second" .1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.9 |