HPN-ICF-RDDC-MIB
Redundancy group is concerned with ensuring minimal disruption to data and control planes in case of a failover. If one of the group-node in an IRF fails, the other group-node in the IRF takes over the function of the failed group-node with minimal service interruption. This module defines the objects pertaining to redundancy group(RDDC).
Main OID:
hpnicfRddc.1.3.6.1.4.1.11.2.14.11.15.2.151
27
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
hpnicfRddcRedundancy group is concerned with ensuring minimal disruption to data and control planes in case of a failover. If one of the group-node in an IRF fails, the other group-node in the IRF takes over the function of the failed group-node with minimal service interruption. This module defines the objects pertaining to redundancy group(RDDC). MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.151 |
hpnicfRddcNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.151.0 |
hpnicfRddcSwitchoverTrapNotification to signal switchover/failover. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.151.0.1 |
hpnicfRddcFailIfRecoverTrapNotification to signal the failed interface recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.151.0.2 |
hpnicfRddcFailIfGenerateTrapNotification to signal the failed interface generated. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.151.0.3 |
hpnicfRddcObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.151.1 |
hpnicfRddcInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1 |
hpnicfRddcTableThis table describes the current status of redundancy groups. SEQUENCE OF HpnicfRddcEntry .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1 |
hpnicfRddcEntryThe entry of hpnicfRddcEntry. HpnicfRddcEntry .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1 |
hpnicfRddcGroupIdxUnique identifier of this redundancy group. 0 is an invalid value.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.1 |
hpnicfRddcGroupNameUnique identifier of this redundancy group.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.2 |
hpnicfRddcPreempTimeRemainThe redundancy group should not switch back immediately when a failover is recovered. The preempt delay timer is started for waiting the failover became believable. This object contains the current preempt delay time remained when a failover is recovered.ro Unsigned32 UNITS "minutes" .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.3 |
hpnicfRddcPreempTimeConfigThe current preempt delay time.ro Unsigned32 UNITS "minutes" .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.4 |
hpnicfRddcHoldTimeRemainTo prevent frequent switchovers of the redundancy group, the hold-down timer started to keeping in a state for a fixed time. This object contains the current remained hold-down time when a switchover or a failover recovery occurred.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.5 |
hpnicfRddcHoldTimeConfigThe current hold-down time.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.6 |
hpnicfRddcNodeTableThis table describes the current status of a redundancy group node. SEQUENCE OF HpnicfRddcNodeEntry .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2 |
hpnicfRddcNodeEntryThe entry of hpnicfRddcNodeEntry. HpnicfRddcNodeEntry .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1 |
hpnicfRddcNodeGroupIdxUnique identifier of this redundancy group. 0 is an invalid value. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.1 |
hpnicfRddcNodeIdUnique identifier of this redundancy group node. 0 is an invalid value. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.2 |
hpnicfRddcNodeBindTypeThe bind type of this redundancy group node. The current version only supports binding chassis of an IRF device.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.3 |
hpnicfRddcNodeBindInfoThe bind information of this redundancy group node. The current version only supports binding chassis of an IRF device. If the value of hpnicfRddcNodeBindType is invalid, the value of hpnicfRddcNodeBindInfo is 65535.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.4 |
hpnicfRddcNodePriorityThe priority of this redundancy group node. The higher the value, the greater the priority.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.5 |
hpnicfRddcNodeWeightThe current weight of this redundancy group node. The max value is 255.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.6 |
hpnicfRddcNodeStatusThe current status of this redundancy group node.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.7 |
hpnicfRddcTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.151.1.2 |
hpnicfRddcNodeInfoThis object contains node identification information where the switchover occurred.ro DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.151.1.2.1 |
hpnicfRddcSwitchReasonThis object contains the cause for switchover.ro DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.151.1.2.2 |