HPN-ICF-QINQ-MIB
802.1Q-in-Q MIB
Main OID:
hpnicfQINQ.1.3.6.1.4.1.11.2.14.11.15.2.69
42
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
42 total| Object Name |
|---|
hpnicfQINQ802.1Q-in-Q MIB MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.69 |
hpnicfQinQMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.69.1 |
hpnicfQinQGlobalConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.69.1.1 |
hpnicfQinQBpduTunnelSwitchThe global configuration switch of BPDU 802.1q tunnel.
If global configuration is disabled, BPDU tunnel function
will be disabled despite of the corresponding configuration
of interface. BPDU tunnel function of a certain interface
would work only if the global and interface's switch are
both enabled.rw HpnicfQinQSwitchState .1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.1 |
hpnicfQinQEthernetTypeValueEthernet protocol type configuring for a global value.
The ethernet protocol type is also the TPID(Tag Protocol
Identity) field of a VLAN tag described in 802.1q
document. This value can be also configured for an
individual interface or VLAN. The node that configure
this value for a single interface is hpnicfQinQIfEthernetType,
whose priority is higher than hpnicfQinQEthernetTypeValue.
That means, if the value configured for a interface is
different from the global value, the switch will select
the configuration of the interface and ignore the global
configuration. The ethernet protocol type of node
hpnicfQinQVidEthernetType that configured for a VLAN has
the highest priority.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.2 |
hpnicfQinQServiceTPIDValueEthernet protocol type configured for service VLAN tags
globally. The ethernet protocol type is also the TPID(Tag
Protocol Identity) field of a VLAN tag described in 802.1q
document. This value can be also configured for an
individual interface. The node that configure this
value for a single interface is hpnicfQinQIfServiceTPIDValue,
whose priority is higher than hpnicfQinQServiceTPIDValue.
That means, if the value configured for a interface is
different from the global value, the switch will select
the configuration of the interface and ignore the global
configuration.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.3 |
hpnicfQinQCustomerTPIDValueEthernet protocol type configured for customer VLAN tags
globally. The ethernet protocol type is also the TPID(Tag
Protocol Identity) field of a VLAN tag described in 802.1q
document. This value can be also configured for an
individual interface. The node that configure this
value for a single interface is hpnicfQinQIfCustomerTPIDValue,
whose priority is higher than hpnicfQinQCustomerTPIDValue.
That means, if the value configured for a interface is
different from the global value, the switch will select
the configuration of the interface and ignore the global
configuration.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.4 |
hpnicfQinQBpduTunnelTableA table for configuring 802.1q BPDU tunnel function
for interfaces. SEQUENCE OF HpnicfQinQBpduTunnelEntry .1.3.6.1.4.1.11.2.14.11.15.2.69.1.2 |
hpnicfQinQBpduTunnelEntryAn entry for configuring 802.1q BPDU tunnel function
for interfaces. HpnicfQinQBpduTunnelEntry .1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1 |
hpnicfQinQProtocolIndexThe index of protocol on which the BPDU tunnel state
will be set. 'bpdu' represents status of BPDU tunnel.
'stp' represents STP tunnel. 'gmosaic' represents GMOSAIC
tunnel. 'igmp' represents IGMP tunnel. STP/GMOSAIC/IGMP
tunnel will start to work only if BPDU tunnel and
STP/GMOSAIC/IGMP tunnel are both enabled. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1.1 |
hpnicfQinQBpduRowStatusOperation status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1.2 |
hpnicfQinQPriorityRemarkTableA table for configuring priority field in 802.1Q-in-Q
outer VLAN tag for interfaces. This feature uses the
priority of an inner VLAN tag to remark the priority
of an outer VLAN tag. SEQUENCE OF HpnicfQinQPriorityRemarkEntry .1.3.6.1.4.1.11.2.14.11.15.2.69.1.3 |
hpnicfQinQPriorityRemarkEntryAn entry for configuring priority remark function for
interfaces. HpnicfQinQPriorityRemarkEntry .1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1 |
hpnicfQinQPriorityValueThe priority value in inner VLAN tag. Since the priority
range is from 0 to 7, yet the index range is from 1 to 8.
Thus, the actual priority value equals to the value that
subtracts 1 from corresponding index value. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.1 |
hpnicfQinQPriorityRemarkValueThe new priority value used to fill outer tag.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.2 |
hpnicfQinQPriorityRowStatusOperation status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.3 |
hpnicfQinQVidTableA table for configuring VLAN ID of the 802.1Q-in-Q
interfaces. SEQUENCE OF HpnicfQinQVidEntry .1.3.6.1.4.1.11.2.14.11.15.2.69.1.4 |
hpnicfQinQVidEntryAn entry for configuring VLAN ID of the 802.1Q-in-Q
interfaces. HpnicfQinQVidEntry .1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1 |
hpnicfQinQVlanIDVLAN ID Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.1 |
hpnicfQinQInboundVidListLowThe inbound VLAN IDs which need 802.1Q-in-Q processing.
The VLAN ID range, described by bitmap, is from 1 to
2048. The length of bitmap is 256 in bytes. Each octet
within this value specifies a set of eight VLANs, with
the first octet specifying VLANs 1 through 8, the second
octet specifying VLANs 9 through 16, etc. Within each
octet, the most significant bit represents the highest
numbered VLAN, and the least significant bit represents
the lowest numbered VLAN.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.2 |
hpnicfQinQInboundVidListHighThe inbound VLAN IDs which need 802.1Q-in-Q processing.
The VLAN ID range, described by bitmap, is from 2049 to
4094. The length of bitmap is 256 in bytes. Each octet
within this value specifies a set of eight VLANs, with
the first octet specifying VLANs 2049 through 2056, the
second octet specifying VLANs 2057 through 2064, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.3 |
hpnicfQinQVidEthernetTypeEthernet protocol type configuring for a VLAN.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.4 |
hpnicfQinQVidRowStatusOperation status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.5 |
hpnicfQinQVidSwapTableA table for configuring 802.1Q-in-Q inner VLAN ID
swapping function for interfaces. SEQUENCE OF HpnicfQinQVidSwapEntry .1.3.6.1.4.1.11.2.14.11.15.2.69.1.5 |
hpnicfQinQVidSwapEntryAn entry for configuring 802.1Q-in-Q inner VLAN ID
swapping function for interfaces. HpnicfQinQVidSwapEntry .1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1 |
hpnicfQinQVidSwapOldThe old VLAN ID of original 802.1Q packets. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.1 |
hpnicfQinQVidSwapNewThe new VLAN ID of original 802.1Q packets.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.2 |
hpnicfQinQVidSwapRowStatusOperation status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.3 |
hpnicfQinQPrioritySwapTableA table for configuring 802.1Q-in-Q inner VLAN priority
swapping function for interfaces. Using this function,
the priority of inner VLAN tag can be modified. SEQUENCE OF HpnicfQinQPrioritySwapEntry .1.3.6.1.4.1.11.2.14.11.15.2.69.1.6 |
hpnicfQinQPrioritySwapEntryAn entry for configuring 802.1Q-in-Q inner VLAN
priority swapping function for interfaces. HpnicfQinQPrioritySwapEntry .1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1 |
hpnicfQinQPrioritySwapOldThe old priority of original 802.1Q packets. It is the
priority of inner VLAN tag. Since the VLAN priority range
is from 0 to 7, yet the index range is from 1 to 8. Thus,
the actual priority value equals to the value that
subtracts 1 from corresponding index value. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.1 |
hpnicfQinQPrioritySwapNewThe new priority of original 802.1Q packets. It is the
priority of inner VLAN tag after swapped.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.2 |
hpnicfQinQPrioritySwapRowStatusOperation status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.3 |
hpnicfQinQIfConfigTableA table for configuring 802.1Q-in-Q functions for
interfaces. SEQUENCE OF HpnicfQinQIfConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.69.1.7 |
hpnicfQinQIfConfigEntryAn entry for configuring 802.1Q-in-Q functions for
interfaces. HpnicfQinQIfConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1 |
hpnicfQinQIfEthernetTypeEthernet protocol type configuring for an interface.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.1 |
hpnicfQinQIfSwitchSwitch of 802.1Q-in-Q functions configuring for an
interface.rw HpnicfQinQSwitchState .1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.2 |
hpnicfQinQIfRowStatusOperation status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.3 |
hpnicfQinQIfServiceTPIDValueService TPID value configured for an interface.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.4 |
hpnicfQinQIfCustomerTPIDValueCustomer TPID value configured for an interface.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.5 |
hpnicfQinQIfUplinkSwitchSwitch of the uplink 802.1Q-in-Q function
for an interface.rw HpnicfQinQSwitchState .1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.6 |
hpnicfQinQIfDownlinkSwitchSwitch of the downlink 802.1Q-in-Q function
for an interface.rw HpnicfQinQSwitchState .1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.7 |