HPN-ICF-RADIUS-MIB
AI MIB Summary
The HPN-ICF-RADIUS-MIB enables configuration management and runtime state monitoring of RADIUS authentication, authorization, and accounting services on HP Network Connectors (ICF) platforms. It exposes specific metrics for RADIUS server connectivity, session status, and protocol-level counters to facilitate real-time operational visibility and policy enforcement.
The HPN-ICF-RADIUS-MIB contains objects to Manage configuration and Monitor running state for RADIUS feature.
Main OID:
hpnicfRadius.1.3.6.1.4.1.11.2.14.11.15.2.13
136
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
136 total| Object Name |
|---|
hpnicfRadiusThe HPN-ICF-RADIUS-MIB contains objects to Manage configuration and Monitor running state for RADIUS feature. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.13 |
hpnicfRdObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.1 |
hpnicfRdInfoTableThe (conceptual) table listing RADIUS authentication servers. SEQUENCE OF HpnicfRdInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1 |
hpnicfRdInfoEntryAn entry (conceptual row) representing a RADIUS authentication server. HpnicfRdInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1 |
hpnicfRdGroupNameThe name of the RADIUS authentication group referred to in this table entry. DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.1 |
hpnicfRdPrimAuthIpThe IP address of primary RADIUS authentication server.rwdeprecated IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.2 |
hpnicfRdPrimUdpPortThe UDP port the client is using to send requests to primary RADIUS authentication server. Default value is 1812.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.3 |
hpnicfRdPrimStateThe state of the primary RADIUS authentication server. 1 (active) The primary authentication server is in active state. 2 (block) The primary authentication server is in block state.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.4 |
hpnicfRdSecAuthIpThe IP address of secondary RADIUS authentication server.rwdeprecated IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.5 |
hpnicfRdSecUdpPortThe UDP port the client is using to send requests to secondary RADIUS authentication server. Default value is 1812.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.6 |
hpnicfRdSecStateThe state of the secondary RADIUS authentication server. 1 (active) The secondary authentication server is in active state. 2 (block) The secondary authentication server is in block state.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.7 |
hpnicfRdKeyThe secret shared between the RADIUS client and RADIUS authentication server used in encoding and decoding sensitive data. When read, hpnicfRdKey always returns an Octet String of length zero.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.8 |
hpnicfRdRetryThe number of attempts the client will make when trying to send requests to a server before it will consider the attempt failed. Default value is 3.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.9 |
hpnicfRdTimeoutThe timeout value the client will use when sending requests to a server. The unit is second. Default value is 3.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.10 |
hpnicfRdPrimAuthIpAddrTypeThe IP addresses type (IPv4 or IPv6) of primary RADIUS authentication server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.11 |
hpnicfRdPrimAuthIpAddrThe IP address of primary RADIUS authentication server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.12 |
hpnicfRdSecAuthIpAddrTypeThe IP addresses type (IPv4 or IPv6) of secondary RADIUS authentication server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.13 |
hpnicfRdSecAuthIpAddrThe IP address of secondary RADIUS authentication server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.14 |
hpnicfRdServerTypeSpecify the type of RADIUS server. 1 (standard) - Server based on RFC protocol(s). 2 (iphotel) - Server for IP-Hotel or 201+ system. 3 (portal) - Server for iTellin Portal system. 4 (extended) - Server based on RADIUS extensions. Default type is standard.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.15 |
hpnicfRdQuietTimeThe time for server returning active. The unit is minute. When the value is 0, the server state retains active. Default value is 5.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.16 |
hpnicfRdUserNameFormatSpecify the user-name format that is sent to RADIUS server. 1 (withoutdomain) - send the user-name without domain. 2 (withdomain) - send the user-name with domain. 3 (keeporignal) - send the user-name as it is entered. Default format is withdomain.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.17 |
hpnicfRdRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpnicfRdGroupName must be specified. To destroy an existent row, the hpnicfRdGroupName MUST NOT be referred by hpnicfDomainTable in hpnicfDomainRadiusGroupName column.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.18 |
hpnicfRdSecKeyThe secret shared between the RADIUS client and the secondary RADIUS authentication server used in encoding and decoding sensitive data. When read, hpnicfRdSecKey always returns an Octet String of length zero.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.19 |
hpnicfRdPrimVpnNameThe human-readable name of the VPN in which the primary RADIUS authentication server is placed.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.20 |
hpnicfRdSecVpnNameThe human-readable name of the VPN in which the secondary RADIUS authentication server is placed.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.21 |
hpnicfRdAuthNasIpAddrTypeThe type (IPv4 or IPv6) of the source IP used to communicate with RADIUS authentication server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.22 |
hpnicfRdAuthNasIpAddrThe source IPv4 address used to communicate with the RADIUS authentication server.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.23 |
hpnicfRdAuthNasIpv6AddrThe source IPv6 address used to communicate with the RADIUS authentication server.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.24 |
hpnicfRdAccInfoTableThe (conceptual) table listing RADIUS accounting servers. SEQUENCE OF HpnicfRdAccInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2 |
hpnicfRdAccInfoEntryAn entry (conceptual row) representing a RADIUS accounting server. HpnicfRdAccInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1 |
hpnicfRdAccGroupNameThe name of the RADIUS group referred to in this table entry. DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.1 |
hpnicfRdPrimAccIpAddrTypeThe IP addresses type (IPv4 or IPv6) of primary RADIUS accounting server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.2 |
hpnicfRdPrimAccIpAddrThe IP address of primary RADIUS accounting server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.3 |
hpnicfRdPrimAccUdpPortThe UDP port the client is using to send requests to primary RADIUS accounting server. Default value is 1813.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.4 |
hpnicfRdPrimAccStateThe state of the primary RADIUS accounting server. 1 (active) The primary accounting server is in active state. 2 (block) The primary accounting server is in block state.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.5 |
hpnicfRdSecAccIpAddrTypeThe IP addresses type (IPv4 or IPv6) of secondary RADIUS accounting server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.6 |
hpnicfRdSecAccIpAddrThe IP address of secondary RADIUS accounting server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.7 |
hpnicfRdSecAccUdpPortThe UDP port the client is using to send requests to secondary RADIUS accounting server. Default value is 1813.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.8 |
hpnicfRdSecAccStateThe state of the secondary RADIUS accounting server. 1 (active) The secondary accounting server is in active state. 2 (block) The secondary accounting server is in block state.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.9 |
hpnicfRdAccKeyThe secret shared between the RADIUS client and RADIUS accounting server used in encoding and decoding sensitive data. When read, hpnicfRdAccKey always returns an Octet String of length zero.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.10 |
hpnicfRdAccRetryThe number of attempt the client will make when trying to send requests to a server before it will consider the attempt failed. Default value is 3.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.11 |
hpnicfRdAccTimeoutThe timeout value the client will use when sending requests to a server. The unit is second. Default value is 3.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.12 |
hpnicfRdAccServerTypeSpecify the type of RADIUS server. 1 (standard) - Server based on RFC protocol(s). 2 (iphotel) - Server for IP-Hotel or 201+ system. 3 (portal) - Server for iTellin Portal system. 4 (extended) - Server based on RADIUS extensions. Default type is standard.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.13 |
hpnicfRdAccQuietTimeThe time for server returning active. The unit is minute. When the value is 0, the server state retains active. Default value is 5.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.14 |
hpnicfRdAccFailureActionDefines the action that authentication should take if authentication succeeds but the associated accounting start fails. 1 (ignore) - treat as authentication success; ignore accounting start failure. 2 (reject) - treat as authentication failed if corresponding accounting start fails. Default value is 1(reject).rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.15 |
hpnicfRdAccRealTimeInterval of realtime-accounting packets. The unit is minute. When the value is 0, the device doesn't send realtime-accounting packets. Default value is 12.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.16 |
hpnicfRdAccRealTimeRetryThe number of attempt the client will make when trying to send realtime-accounting packet to accounting server before it will consider the attempt failed. Default value is 5.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.17 |
hpnicfRdAccSaveStopPktEnableThe control of whether save stop-accounting packet in local buffer and resend later when the accounting server doesn't respond. When SaveStopPktEnable is set to false, the value of AccStopRetry will be ignored. Default value is true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.18 |
hpnicfRdAccStopRetryThe number of attempt the client will make when trying to send stop-accounting packet to accounting server. Default value is 500.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.19 |
hpnicfRdAccDataFlowUnitSpecify data flow format that is sent to RADIUS server. The value SHOULD be set the same as the value of corresponding server. 1 (byte) - Specify 'byte' as the unit of data flow. 2 (kiloByte) - Specify 'kilo-byte' as the unit of data flow. 3 (megaByte) - Specify 'mega-byte' as the unit of data flow. 4 (gigaByte) - Specify 'giga-byte' as the unit of data flow. Default value is 1.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.20 |
hpnicfRdAccPacketUnitSpecify packet format that is sent to RADIUS server. The value SHOULD be set the same as the value of corresponding server. 1 (onePacket) - Specify 'one-packet' as the unit of packet. 2 (kiloPacket) - Specify 'kilo-packet' as the unit of packet. 3 (megaPacket) - Specify 'mega-packet' as the unit of packet. 4 (gigaPacket) - Specify 'giga-packet' as the unit of packet. Default value is 1.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.21 |
hpnicfRdAccRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpnicfRdAccGroupName must be specified. To destroy an existent row, the hpnicfRdAccGroupName MUST NOT be referred by hpnicfDomainTable in hpnicfDomainRadiusGroupName column.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.22 |
hpnicfRdAcctOnEnableThe control of Accounting-On function. The Accounting-On function is used by the client to mark the start of accounting (for example, upon booting) by sending Accounting-On packets and to mark the end of accounting (for example, just before a scheduled reboot) by sending Accounting-Off packets. Default value is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.23 |
hpnicfRdAcctOnSendTimesThe number of Accounting-On packets the client will send before it considers the accounting server failed. Default value is 50.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.24 |
hpnicfRdAcctOnSendIntervalInterval of Accounting-On packets. The unit is second. Default value is 3.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.25 |
hpnicfRdSecAccKeyThe secret shared between the RADIUS client and the secondary RADIUS accounting server used in encoding and decoding sensitive data. When read, hpnicfRdSecAccKey always returns an Octet String of length zero.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.26 |
hpnicfRdPrimAccVpnNameThe human-readable name of the VPN in which the primary RADIUS accounting server is placed.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.27 |
hpnicfRdSecAccVpnNameThe human-readable name of the VPN in which the secondary RADIUS accounting server is placed.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.28 |
hpnicfRdAccNasIpAddrTypeThe type (IPv4 or IPv6) of the source IP used to communicate with RADIUS accounting server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.29 |
hpnicfRdAccNasIpAddrThe source IPv4 address used to communicate with the RADIUS accounting server.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.30 |
hpnicfRdAccNasIpv6AddrThe source IPv6 address used to communicate with the RADIUS accounting server.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.31 |
hpnicfRadiusGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.1.3 |
hpnicfRadiusAuthErrThresholdThe threshold of authentication failure trap. A trap will be sent when the percent of the unsuccessful authentication exceeds this threshold.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.3.1 |
hpnicfRdSecondaryAuthServerTableThe (conceptual) table listing RADIUS secondary authentication servers. SEQUENCE OF HpnicfRdSecondaryAuthServerEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.1.4 |
hpnicfRdSecondaryAuthServerEntryAn entry (conceptual row) representing a RADIUS secondary authentication server. HpnicfRdSecondaryAuthServerEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1 |
hpnicfRdSecondaryAuthIpAddrTypeThe IP addresses type (IPv4 or IPv6) of secondary RADIUS authentication server. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.1 |
hpnicfRdSecondaryAuthIpAddrThe IP address of secondary RADIUS authentication server. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.2 |
hpnicfRdSecondaryAuthVpnNameThe human-readable name of the VPN in which the secondary RADIUS authentication server is placed. DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.3 |
hpnicfRdSecondaryAuthUdpPortThe UDP port the client is using to send requests to secondary RADIUS authentication server. Default value is 1812. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.4 |
hpnicfRdSecondaryAuthStateThe state of the secondary RADIUS authentication server. 1 (active) The secondary authentication server is in active state. 2 (block) The secondary authentication server is in block state.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.5 |
hpnicfRdSecondaryAuthKeyThe secret shared between the RADIUS client and the secondary RADIUS authentication server used in encoding and decoding sensitive data. When read, hpnicfRdSecondaryAuthKey always returns an Octet String of length zero.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.6 |
hpnicfRdSecondaryAuthRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpnicfRdGroupName must be specified. The number of rows with the same hpnicfRdGroupName can't be more than 16.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.7 |
hpnicfRdSecondaryAccServerTableThe (conceptual) table listing RADIUS secondary accounting servers. SEQUENCE OF HpnicfRdSecondaryAccServerEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.1.5 |
hpnicfRdSecondaryAccServerEntryAn entry (conceptual row) representing a RADIUS secondary accounting server. HpnicfRdSecondaryAccServerEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1 |
hpnicfRdSecondaryAccIpAddrTypeThe IP addresses type (IPv4 or IPv6) of secondary RADIUS accounting server. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.1 |
hpnicfRdSecondaryAccIpAddrThe IP address of secondary RADIUS accounting server. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.2 |
hpnicfRdSecondaryAccVpnNameThe human-readable name of the VPN in which the secondary RADIUS accounting server is placed. DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.3 |
hpnicfRdSecondaryAccUdpPortThe UDP port the client is using to send requests to secondary RADIUS accounting server. Default value is 1813. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.4 |
hpnicfRdSecondaryAccStateThe state of the secondary RADIUS accounting server. 1 (active) The secondary accounting server is in active state. 2 (block) The secondary accounting server is in block state.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.5 |
hpnicfRdSecondaryAccKeyThe secret shared between the RADIUS client and the secondary RADIUS accounting server used in encoding and decoding sensitive data. When read, hpnicfRdSecondaryAccKey always returns an Octet String of length zero.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.6 |
hpnicfRdSecondaryAccRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpnicfRdAccGroupName must be specified. The number of rows with the same hpnicfRdAccGroupName can't be more than 16.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.7 |
hpnicfRadiusAccounting OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.2 |
hpnicfRadiusAccClient OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.2.1 |
hpnicfRadiusAccServerTableThe (conceptual) table listing the RADIUS accounting servers with which the client shares a secret. SEQUENCE OF HpnicfRadiusAccServerEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1 |
hpnicfRadiusAccServerEntryAn entry (conceptual row) representing a RADIUS accounting server with which a client shares a secret. HpnicfRadiusAccServerEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1 |
hpnicfRadiusAccClientStartRequestsThe number of RADIUS accounting start request sent to this server.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1.1 |
hpnicfRadiusAccClientStartResponsesThe number of RADIUS accounting start response received from this server.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1.2 |
hpnicfRadiusAccClientInterimRequestsThe number of RADIUS interim accounting request sent to this server.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1.3 |
hpnicfRadiusAccClientInterimResponsesThe number of RADIUS interim accounting response received from this server.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1.4 |
hpnicfRadiusAccClientStopRequestsThe number of RADIUS stop accounting request sent to this RADIUS server.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1.5 |
hpnicfRadiusAccClientStopResponsesThe number of RADIUS stop accounting response received from this server.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1.6 |
hpnicfRadiusServerTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.3 |
hpnicfRadiusServerTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.3.0 |
hpnicfRadiusAuthServerUpTrapThis trap is generated when the device finds that the state of RADIUS authentication server becomes reachable from unreachable. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.13.3.0.1 |
hpnicfRadiusAccServerUpTrapThis trap is generated when the device finds that the state of RADIUS accounting server becomes reachable from unreachable. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.13.3.0.2 |
hpnicfRadiusAuthErrTrapThis trap is generated when the device finds that the percent of unsuccessful authentication exceeds a threshold, and the threshold is the value of node hpnicfRadiusAuthErrThreshold. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.13.3.0.3 |
hpnicfRadiusAuthServerDownTrapThis trap is generated when the authentication RADIUS server doesn't respond client's requests for specified times. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.13.3.1 |
hpnicfRadiusAccServerDownTrapThis trap is generated when the accounting RADIUS server doesn't respond client's requests for specified times. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.13.3.2 |
hpnicfRadiusAuthenticating OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.4 |
hpnicfRadiusAuthClient OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.4.1 |
hpnicfRadiusAuthServerTableThe (conceptual) table listing the RADIUS authenticating servers with which the client shares a secret. SEQUENCE OF HpnicfRadiusAuthServerEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.4.1.1 |
hpnicfRadiusAuthServerEntryAn entry (conceptual row) representing a RADIUS authenticating server with which a client shares a secret. HpnicfRadiusAuthServerEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.4.1.1.1 |
hpnicfRadiusAuthFailureTimesThe number of RADIUS authenticating failed to this server.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.13.4.1.1.1.1 |
hpnicfRadiusAuthTimeoutTimesThe number of RADIUS authenticating timeout to this server.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.13.4.1.1.1.2 |
hpnicfRadiusAuthRejectTimesThe number of RADIUS authenticating rejected to this server.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.13.4.1.1.1.3 |
hpnicfRadiusExtend OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.5 |
hpnicfRadiusExtendObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.5.1 |
hpnicfRadiusExtendTables OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2 |
hpnicfRadiusSchAuthTableThe (conceptual) table listing RADIUS authentication servers. SEQUENCE OF HpnicfRadiusSchAuthEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1 |
hpnicfRadiusSchAuthEntryAn entry (conceptual row) representing RADIUS authentication servers. HpnicfRadiusSchAuthEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1 |
hpnicfRadiusSchAuthGroupNameThe name of the RADIUS authentication server group referred to in this table entry. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.1 |
hpnicfRadiusSchAuthPrimIpAddrThe IP address of primary RADIUS authenticaiton server.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.2 |
hpnicfRadiusSchAuthPrimUdpPortThe UDP port the client is using to send requests to primary RADIUS authentication server. Default value is 1812.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.3 |
hpnicfRadiusSchAuthPrimKeyThe secret shared between the RADIUS client and the primary RADIUS authentication server used in encoding and decoding sensitive data.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.4 |
hpnicfRadiusSchAuthSecIpAddrThe IP address of secondary RADIUS authenticaiton server.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.5 |
hpnicfRadiusSchAuthSecUdpPortThe UDP port the client is using to send requests to secondary RADIUS authentication server. Default value is 1812.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.6 |
hpnicfRadiusSchAuthSecKeyThe secret shared between the RADIUS client and the secondary RADIUS authentication server used in encoding and decoding sensitive data.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.7 |
hpnicfRadiusSchAuthRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpnicfRadiusSchAuthGroupName must be specified, and this action will create a corresponding domain that hpnicfDomainRadiusGroupName is the same as hpnicfRadiusSchAuthGroupName. To destroy an existent row, the hpnicfRadiusSchAuthGroupName MUST NOT be referred by hpnicfDomainTable in hpnicfDomainRadiusGroupName column.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.8 |
hpnicfRadiusSchAccTableThe (conceptual) table listing RADIUS accounting servers. SEQUENCE OF HpnicfRadiusSchAccEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2 |
hpnicfRadiusSchAccEntryAn entry (conceptual row) representing RADIUS accounting servers. HpnicfRadiusSchAccEntry .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1 |
hpnicfRadiusSchAccGroupNameThe name of the RADIUS accounting server group referred to in this table entry. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.1 |
hpnicfRadiusSchAccPrimIpAddrThe IP address of primary RADIUS accounting server.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.2 |
hpnicfRadiusSchAccPrimUdpPortThe UDP port the client is using to send requests to primary RADIUS accounting server. Default value is 1813.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.3 |
hpnicfRadiusSchAccPrimKeyThe secret shared between the RADIUS client and the primary RADIUS accounting server used in encoding and decoding sensitive data.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.4 |
hpnicfRadiusSchAccSecIpAddrThe IP address of secondary RADIUS accounting server.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.5 |
hpnicfRadiusSchAccSecUdpPortThe UDP port the client is using to send requests to secondary RADIUS accounting server. Default value is 1813.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.6 |
hpnicfRadiusSchAccSecKeyThe secret shared between the RADIUS client and the secondary RADIUS accounting server used in encoding and decoding sensitive data.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.7 |
hpnicfRadiusSchAccRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpnicfRadiusSchAccGroupName must be specified, and this action will create a corresponding domain that hpnicfDomainRadiusGroupName is the same as hpnicfRadiusSchAccGroupName. To destroy an existent row, the hpnicfRadiusSchAccGroupName MUST NOT be referred by hpnicfDomainTable in hpnicfDomainRadiusGroupName column.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.8 |
hpnicfRadiusExtendTraps OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.5.3 |
hpnicfRadiusStatistic OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.6 |
hpnicfRadiusStatAccReqIt shows the number of radius account request to the radius server.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.13.6.1 |
hpnicfRadiusStatAccAckIt shows the number of radius account response from the radius server.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.13.6.2 |
hpnicfRadiusStatLogoutReqIt shows the number of logout request to the radius server.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.13.6.3 |
hpnicfRadiusStatLogoutAckIt shows the number of logout response from the radius server.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.13.6.4 |
hpnicfRadiusServerTrapVarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.13.7 |
hpnicfRadiusServerFirstTrapTimeRepresents the first trap time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.11.15.2.13.7.1 |