HPN-ICF-QOS-PROFILE-MIB
AI MIB Summary
The HPN-ICF-QOS-PROFILE-MIB enables monitoring and configuration of Quality of Service (QoS) traffic profiles on HPE Aruba Networking (formerly HP) Intelligent Call Flow (ICF) devices. It exposes parameters defining bandwidth allocation, packet marking, and traffic prioritization policies to enforce service level agreements on network interfaces.
The private MIB file includes the general information QoS profile.
Main OID:
hpnicfQosProfile.1.3.6.1.4.1.11.2.14.11.15.2.17
100
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
100 total| Object Name |
|---|
hpnicfQosProfileThe private MIB file includes the general information QoS profile. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.17 |
hpnicfQoSProfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.17.1 |
hpnicfQoSProf OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.17.1.1 |
hpnicfQoSProfTableQoS profile table is used to config the qos profiles. SEQUENCE OF HpnicfQoSProfEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1 |
hpnicfQoSProfEntry HpnicfQoSProfEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1 |
hpnicfQoSProfIndexQoS profile table index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1.1 |
hpnicfQoSProfNameQoS profile name.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1.2 |
hpnicfQoSProfActionNumberTotal number of actions of a QoS profile.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1.3 |
hpnicfQoSProfRowStatusRowStatus,Now support three state:CreateAndGo,Active,Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1.4 |
hpnicfQoSAction OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2 |
hpnicfQoSTrafficLimitTableTraffic limit table is used to set the average rate or peak rate of the flow. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. SEQUENCE OF HpnicfQoSTrafficLimitEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1 |
hpnicfQoSTrafficLimitEntry HpnicfQoSTrafficLimitEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1 |
hpnicfQoSTrafLmtProfIndexThe index of QoS profile which the traffic-limit action belongs to. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.1 |
hpnicfQoSTrafLmtActionIndexThe index of traffic-limit action. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.2 |
hpnicfQoSTrafLmtDirectionThe direction of traffic-limit action.rw HpnicfQoSDirection .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.3 |
hpnicfQoSTrafLmtUserAclNumThe number of user-based acl group.rw Integer32 (0 | 5000..5999) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.4 |
hpnicfQoSTrafLmtUserAclRuleThe subitem of user-based acl rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.5 |
hpnicfQoSTrafLmtIpAclNumThe number of Ip-based acl group.rw Integer32 (0 | 2000..3999) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.6 |
hpnicfQoSTrafLmtIpAclRuleThe subitem of IP-based acl rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.7 |
hpnicfQoSTrafLmtLinkAclNumThe number of Link-based acl grouprw Integer32 (0 | 4000..4999) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.8 |
hpnicfQoSTrafLmtLinkAclRuleThe subitem of Link-based acl rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.9 |
hpnicfQoSTrafLmtTargetRateMbpsTarget rate:Mbps Some products only support Mbps,but others support Kbps,so Kbps and Mbps should be supportted mutually exclusively on the same product.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.10 |
hpnicfQoSTrafLmtTargetRateKbpsTarget rate:Kbps. Some products only support Kbps,but others support Mbps,so Kbps and Mbps should be supportted mutually exclusively on the same product.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.11 |
hpnicfQoSTrafLmtPeakRatePeak raterw Integer32 (0 | 64..8388608) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.12 |
hpnicfQoSTrafLmtCIRCommitted Information Rate. unit:kbps.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.13 |
hpnicfQoSTrafLmtCBSCommitted Burst Size. unit:byte.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.14 |
hpnicfQoSTrafLmtEBSExcess Burst Size. unit:byte.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.15 |
hpnicfQoSTrafLmtPIRPeak Information Rate. unit:kbps.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.16 |
hpnicfQoSTrafLmtConformLocalPreThe local precedence of conformed flow.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.17 |
hpnicfQoSTrafLmtConformActionTypeThe action type of conformed flow.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.18 |
hpnicfQoSTrafLmtExceedActionTypeThe action type of non-conformed flow.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.19 |
hpnicfQoSTrafLmtExceedDscpThe remarked DSCP value of non-conformed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking DSCP, then value 255 is returned for get/get-next operation.rw Integer32 (0..63 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.20 |
hpnicfQoSTrafLmtExceedCosThe remarked COS value of non-conformed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking COS, then value 255 is returned for get/get-next operation.rw Integer32 (0..7 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.21 |
hpnicfQoSTrafLmtRowStatusRowStatus,Now support three state:CreateAndGo,Active,Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.22 |
hpnicfQoSTrafLmtConformCosIf the user chooses remark-cos value of the hpnicfQoSTrafLmtConformActionType, this object can be used to set the conform cos value. There are some enumerations as follows: best-effort Specify best-effort priority(0) background Specify background priority(1) spare Specify spare priority(2) excellent-effort Specify excellent-effort priority(3) controlled-load Specify controlled-load priority(4) video Specify video priority(5) voice Specify voice priority(6) network-management Specify network-management priority(7) 255 indicates invalid value.rw Integer32 (0..7|255) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.23 |
hpnicfQoSTrafLmtConformDscpIf the user chooses remark-dscp value of the hpnicfQoSTrafLmtConformActionType, this object can be used to set the conform dscp value. There are some enumerations as follows: <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46) 255 indicates invalid value.rw Integer32 (0..63|255) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.24 |
hpnicfQoSTrafficPriorityTableTraffic priority table is used to remark the IP-precedence, DSCP or COS priority of packets. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. QOS policed service from DSCP mapping table is pre-defined in the hpnicfDscpMapTable in the HPN-ICF-LswQos-MIB. Policed service can decide what kind of QOS service the flow should get by the DSCP vlaue in the packets. Policed service includes remarking new DSCP,new EXP,new 802.1p priority,new local precedence and new drop priority. SEQUENCE OF HpnicfQoSTrafficPriorityEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2 |
hpnicfQoSTrafficPriorityEntry HpnicfQoSTrafficPriorityEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1 |
hpnicfQoSTrafPrioProfIndexThe index of QoS profile which the traffic-priority action belongs to. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.1 |
hpnicfQoSTrafPrioActionIndexThe index of traffic-priority action. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.2 |
hpnicfQoSTrafPrioDirectionThe direction of traffic-priority action.rw HpnicfQoSDirection .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.3 |
hpnicfQoSTrafPrioUserAclNumThe number of user-based acl group.rw Integer32 (0 | 5000..5999) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.4 |
hpnicfQoSTrafPrioUserAclRuleThe subitem of user-based acl rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.5 |
hpnicfQoSTrafPrioIpAclNumThe number of Ip-based acl group.rw Integer32 (0 | 2000..3999) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.6 |
hpnicfQoSTrafPrioIpAclRuleThe subitem of IP-based acl rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.7 |
hpnicfQoSTrafPrioLinkAclNumThe number of Link-based acl grouprw Integer32 (0 | 4000..4999) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.8 |
hpnicfQoSTrafPrioLinkAclRuleThe subitem of Link-based acl rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.9 |
hpnicfQoSTrafPrioDscpSet new DSCP value of specifed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking DSCP, then value 255 is returned for get/get-next operation.rw Integer32 (0..63 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.10 |
hpnicfQoSTrafPrioIpPreSet Ip precedence value of specifed flow. Ip precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence, then value 255 is returned for get/get-next operation.rw Integer32 (0..7 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.11 |
hpnicfQoSTrafPrioIpPreFromCosSet Ip precedence according to vlan priority. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence from COS, then value 2 is returned for get/get-next operation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.12 |
hpnicfQoSTrafPrioCosSet vlan priority of specifed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS, then value 255 is returned for get/get-next operation.rw Integer32 (0..7 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.13 |
hpnicfQoSTrafPrioCosFromIpPreSet vlan priority according to IP precedence. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS from Ip precedence, then value 2 is returned for get/get-next operation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.14 |
hpnicfQoSTrafPrioLocalPreSet local precedence of specifed flow. Local precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking local precedence, then value 255 is returned for get/get-next operation.rw Integer32 (0..7 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.15 |
hpnicfQoSTrafPrioPolicedServiceTypeThe service type of policed Priority. Policed Service is not allowed to be set with remarking DSCP,IpPrecedence,IpPrecedenceFromCOS,COS,COSFromIpPrecedence and LocalPrecedence action simultaneously on the same product. Policed service is user-predefined qos policy parameters. trust-dscp(2) means to decide new police service parameters by the DSCP value in the packets. new-dscp(3) means to decide new police service parameters by the new DSCP value set by the user. And a DSCP mapping table should be pre-defined in the hpnicfDscpMapTable in the HPN-ICF-LswQos-MIB. Untrusted(4) means to set all the new DSCP,EXP,COS,Local precedence and Drop priority by the user.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.16 |
hpnicfQoSTrafPrioPolicedServiceDscpThe service Dscp of policed Priorityrw Integer32 (0..63 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.17 |
hpnicfQoSTrafPrioPolicedServiceExpThe service Exp of policed Priorityrw Integer32 (0..7 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.18 |
hpnicfQoSTrafPrioPolicedServiceCosThe service cos of policed Priorityrw Integer32 (0..7 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.19 |
hpnicfQoSTrafPrioPolicedServiceLoaclPreThe service local pre of policed Priorityrw Integer32 (0..7 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.20 |
hpnicfQoSTrafPrioPolicedServiceDropPriorityThe service drop priority of proliced Priorityrw Integer32 (0..2 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.21 |
hpnicfQoSTrafPrioRowStatusRowStatus,Now support three state:CreateAndGo,Active,Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.22 |
hpnicfQoSTrafficFilterTableTraffic filter table is used to deny or permit packets. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. To deny or permit packets,the ACL rules should be defined in hpnicfAcl table. The 'deny' or 'permit' action should be defined with ACL rules. In this table,a predefined ACL rules can be referenced in a specified QOS profile group. 'Direction' means the ACL rules can be applied to the inbound or outbound packets. SEQUENCE OF HpnicfQoSTrafficFilterEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3 |
hpnicfQoSTrafficFilterEntry HpnicfQoSTrafficFilterEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1 |
hpnicfQoSTrafFilterProfIndexThe index of QoS profile which the traffic-filter action belongs to. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.1 |
hpnicfQoSTrafFilterActionIndexThe index of traffic-filter action. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.2 |
hpnicfQoSTrafFilterDirectionThe direction of traffic-filter action.rw HpnicfQoSDirection .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.3 |
hpnicfQoSTrafFilterUserAclNumThe number of user-based acl group.rw Integer32 (0 | 5000..5999 ) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.4 |
hpnicfQoSTrafFilterUserAclRuleThe subitem of user-based acl rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.5 |
hpnicfQoSTrafFilterIpAclNumThe number of Ip-based acl group.rw Integer32 (0 | 2000..3999) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.6 |
hpnicfQoSTrafFilterIpAclRuleThe subitem of IP-based acl rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.7 |
hpnicfQoSTrafFilterLinkAclNumThe number of Link-based acl grouprw Integer32 (0 | 4000..4999) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.8 |
hpnicfQoSTrafFilterLinkAclRuleThe subitem of Link-based acl rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.9 |
hpnicfQoSTrafFilterRowStatusRowStatus,Now support three state:CreateAndGo,Active,Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.10 |
hpnicfQoSProfPortMapping OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3 |
hpnicfQoSProfPortMappingTablePort mapping table is used to apply the qos profile to the port. If a qos profile is applied to the port, then the port will have an entry in the table. SEQUENCE OF HpnicfQoSProfPortMappingEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1 |
hpnicfQoSProfPortMappingEntry HpnicfQoSProfPortMappingEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1.1 |
hpnicfQoSProfPortMappingIfIndexThe ifindex which the specified QoS profile group is applied to. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1.1.1 |
hpnicfQoSProfPortMappingProfIndexThe index of specified QoS profile group. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1.1.2 |
hpnicfQoSProfPortMappingRowStatusRowStatus,Now support three state:CreateAndGo,Active,Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1.1.3 |
hpnicfQoSProfPortMappingModeTablePort mapping mode table is used to set mapping mode of the port. When a qos profile is applied to a port, the profile can have two working ways: 1)The profile is the same for all the users connected to the port; 2)The profile can be different for different users connected to the port; Port-based mode means the profile is the same for all the users. User-based mode means the profile is different for different users. Default value is port-based. SEQUENCE OF HpnicfQoSProfPortMappingModeEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.2 |
hpnicfQoSProfPortMappingModeEntry HpnicfQoSProfPortMappingModeEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.2.1 |
hpnicfQoSProfPortMappingModeIfIndexThe ifindex which the QoS profile mapping mode is applied to. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.2.1.1 |
hpnicfQoSProfPortMappingModeThe QoS profile mapping mode of specifed port.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.2.1.2 |
hpnicfQoSProfDynPortMappingTableDynamic port mapping table is used to get user' port,MAC address,IP address,VLAN ID and user-specified qos profiles. Network managers can allocate different QOS profile groups to different users. Once the user is on line, then the user-specified QOS profiles will be dynamically applied to the port the user connects. Each port can have different groups of users simultaneously connected. Each group of users can have assiociation with multiple QOS profiles simultaneously. So the user's port,MAC address,IP address and VLAN ID will replace the source information in the ACL rules refered in the QOS profiles. Once the user is off line, then the user-specified QOS profiles will be dynamically deleted from the port the user connects. SEQUENCE OF HpnicfQoSProfDynPortMappingEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3 |
hpnicfQoSProfDynPortMappingEntry HpnicfQoSProfDynPortMappingEntry .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1 |
hpnicfQoSProfDynPortMappingIfIndexif index of the port user profile is applied. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.1 |
hpnicfQoSProfDynPortMappingUserSrcMACUser sourc MAC address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.2 |
hpnicfQoSProfDynPortMappingUserNameUser name.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.3 |
hpnicfQoSProfDynPortMappingUserIPAddrUser IP addressro IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.4 |
hpnicfQoSProfDynPortMappingUserVLANIDUser VLAN ID.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.5 |
hpnicfQoSProfDynPortMappingUserProfNameUser profile name.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.6 |
hpnicfQoSProfPortMappingTraps OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.17.2 |
hpnicfQoSProfPortMappingErrorAn hpnicfQoSProfPortMappingError notification is generated when a qos profile fails to be applied on the port. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.17.2.1 |
hpnicfQoSProfMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.17.3 |
hpnicfQoSProfMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.17.3.1 |
hpnicfQoSProfMibComplianceThe compliance statement for QoS Profile MIB. Unknown .1.3.6.1.4.1.11.2.14.11.15.2.17.3.1.1 |
hpnicfQoSProfMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.17.3.2 |
hpnicfQoSProfGroupIncluded table: hpnicfQoSProfTable. Unknown .1.3.6.1.4.1.11.2.14.11.15.2.17.3.2.1 |
hpnicfQoSActionGroupIncluded table: 1)hpnicfQoSTrafficLimitTable. 2)hpnicfQoSTrafficPriorityTable. 3)hpnicfQoSTrafficFilterTable Unknown .1.3.6.1.4.1.11.2.14.11.15.2.17.3.2.2 |
hpnicfQoSProfPortMappingGroupIncluded tables: 1)hpnicfQoSProfPortMappingTable. 2)hpnicfQoSProfPortMappingModeTable. 3)hpnicfQoSProfDynPortMappingTable. Unknown .1.3.6.1.4.1.11.2.14.11.15.2.17.3.2.3 |
hpnicfQoSProfPortMappingTrapsGroupIncluded: hpnicfQoSProfPortMappingTraps. Unknown .1.3.6.1.4.1.11.2.14.11.15.2.17.3.2.4 |