HPN-ICF-SAN-AGG-MIB
AI MIB Summary
The HPN-ICF-SAN-AGG-MIB module manages Fiber Channel SAN aggregation groups on HP networking hardware, enabling the creation, deletion, and state monitoring of port membership within these logical bundles. It provides granular control over FC port associations and exposes operational status indicators for each member port within the aggregation group.
This MIB module is for configuring and monitoring SAN (Storage Area Networks) aggregation group related MIB objects. This MIB can be used to add or delete a SAN aggregation group, and make one or more FC (Fiber Channel) ports join or leave the group, as well as show their states.
Main OID:
hpnicfSanAgg.1.3.6.1.4.1.11.2.14.11.15.2.127.2
18
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
hpnicfSanAggThis MIB module is for configuring and monitoring SAN (Storage Area Networks) aggregation group related MIB objects. This MIB can be used to add or delete a SAN aggregation group, and make one or more FC (Fiber Channel) ports join or leave the group, as well as show their states. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.127.2 |
hpnicfSanAggMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.127.2.1 |
hpnicfSanAggMaxMemberNumberThis value specifies the maximum member number that a SAN aggregation group supports, and this restriction depends on product customization.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.127.2.1.1 |
hpnicfSanAggGroupTableA table of SAN aggregation objects to be used in configuring and monitoring a SAN aggregation group and its members. SEQUENCE OF HpnicfSanAggGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.127.2.2 |
hpnicfSanAggGroupEntryA group of SAN aggregation objects to be used in configuring and monitoring a SAN aggregation group and its members. HpnicfSanAggGroupEntry .1.3.6.1.4.1.11.2.14.11.15.2.127.2.2.1 |
hpnicfSanAggGroupNumberThe serial number of the current SAN aggregation group.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.127.2.2.1.1 |
hpnicfSanAggGroupIndexThe ifIndex of the current SAN aggregation group.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.127.2.2.1.2 |
hpnicfSanAggMemberListList of member's ifIndex in the current SAN aggregation group. If there is no member in the SAN aggregation group, the list length should be zero. Otherwise each member's ifIndex value occupies 4 octets. The greatest length of this list depends on the maximum number of members a SAN aggregation group supports, which can be customized and therefore is not a fixed value. When getting the group members' ifIndexes, the result was sorted in ascending order of ifIndex values. However, when setting the group members' ifIndexes, the sequence of ifIndex values is not required.rw HpnicfMemberList .1.3.6.1.4.1.11.2.14.11.15.2.127.2.2.1.3 |
hpnicfSanAggMemberStateListList of member's state in current SAN aggregation group, where the state value is sorted in ascending order of member's ifIndex, which is consistent with the 'get' result of 'hpnicfSanAggMemberList'. The explanation of this value's length is as same as the 'hpnicfSanAggMemberList'. Each member's state value occupies 4 octets. The value specifications are listed as follows: 1: This member hasn't passed the link negotiation. 2: This member has passed the link negotiation but has not been selected. 3: This member has been selected.ro HpnicfMemberList .1.3.6.1.4.1.11.2.14.11.15.2.127.2.2.1.4 |
hpnicfSanAggGroupRowStatusRowStatus. Now only three states are supported: createAndGo, active, and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.127.2.2.1.5 |
hpnicfSanAggObjForNotification OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.127.2.3 |
hpnicfSanAggGroupPreviousSpeedThe previous speed of the SAN aggregation group.ro Integer32 UNITS "gigabit bps" .1.3.6.1.4.1.11.2.14.11.15.2.127.2.3.1 |
hpnicfSanAggGroupCurrentSpeedThe current speed of the SAN aggregation group.ro Integer32 UNITS "gigabit bps" .1.3.6.1.4.1.11.2.14.11.15.2.127.2.3.2 |
hpnicfSanAggNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.127.2.4 |
hpnicfSanAggNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.127.2.4.0 |
hpnicfSanAggGroupSpeedChangeThis event will be triggered whenever a SAN aggregation group changes its speed. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.127.2.4.0.1 |
hpnicfSanAggMemberInactiveThis event will be triggered whenever any member in a SAN aggregation group is made inactive. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.127.2.4.0.2 |
hpnicfSanAggMemberActiveThis event will be triggered whenever any member in a SAN aggregation group is made active. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.127.2.4.0.3 |