MIB Catalog

MIB module

This MIB Contains OID subtrees used in some of the MIBs under 'stratacom' enterprise.

This MIB contains information on the online diagnostics in MGX82xx(MGX8250, MGX8220, MGX8230 etc) products.

MIB module

The MIB module to configure serial ports in Processor Module and different Service Modules(cards) in MGX8850,MGX8250 and MGX8220 ATM Edge switches.

MIB module

The MIB module containing objects related to user-side of the ATM UNI Port. The mib is applicable for MGX8250 and MGX8220 products. Terminologies used: UNI : User Network Interface.

The MIB module which describes the features supported in MGX82XX products. This MIB Module provides the features supported in Controller Cards in MGX8250 and MGX8220. Terminologies used: PXM : Process

The MIB module to configure DS1/E1 interface objects. This mib also contains the alarm configuration of DS1/E1 interfaces. This mib is supported in T1/E1 service modules.

The MIB Module for BERT (Bit Error Rate Testing) on ds3 interfaces in some of the cards (Service Modules) in MGX products. This MIB is applicable for following T3/E3 Service Modules: FRSM-2T3E3 : Fram

The MIB Module for DS3/E3 interface configuration , statistics and Alarm configuration. This MIB is supported in T3/E3 service modules in MGX products. Some of the T3/E3 service modules(Cards) are: PX

The MIB module to describe the status of the Environmental Monitoring devices in MGX82xx products.

The MIB module to configure the resource partition on service modules(cards) supported in MGX82xx and MGX88xx products. This MIB is supported in following Service Modules: AUSM (ATM UNI Service Module

The MIB module to describe the clock configuration in Processor Switch Module(PXM) in MGX82xx product. Back cards supported for PXM1: PXM-UI : T1 Clock port, E1 Clock Port PXM-UI-S3 : External Clock1

The connection MIB module for RPM(Router Blade) service module in MGX8250/MGX8230 products. The 'channel' and 'connection' and 'connection endpoint' mean same in this MIB.

The MIB module to manage resource partition objects. A resource partition is configured on a RPM subinterface. An administrator can partition connection related resources like VPI, VCI ranges, bandwid

This MIB is used to provision backplane sub-interfaces on the MGX's Route Processor Module (RPM). This MIB is implemented on the MGX controller to manage the RPM. The RPM

MIB module

The MIB module for configuration ond reporting statistics of virtual ports in PXM1 Service module in MGX82xx series.

This MIB module is used for getting the ifIndex values given physical location and/or logical information. The physical information includes the slot, back-card and physical line, IMA group ID, MFR (M

The MIB module contain the Bearer and CID (Channel Identifier) connection information.

The MIB module containing the CAC information for VISM service module.

The MIB module contain the CAS backhaul feature in VISM

The MIB module contains tables for configurating and maintaining Codec on VISM service module.

The MIB module to contains configuration and connection state information the VISM. For VoIP(Voice over IP) support, VISM needs one active AAL5 bearer PVC and one active AAL5 control PVC between the V

The MIB module contain VISM channel counters information.

This MIB module contains ds0 configuration, Status and DS0 related information on a DS1 interface supported in VISM module. VISM is a Voice Interworking Service Module supported in MGX8250 and MGX8850

The MIB module to configure DS1/E1 interface objects in a Voice Interworking Service Module (VISM) module. This MIB is an extension to CISCO-MGX82XX-DSX1-MIB for DS1/E1 configuration in VISM. Terms us

The MIB module containing table for configurating and maintaining counters for the HDLC channel on VISM service module.

This MIB module contains VISM Card specific attributes and call statistics information for VISM service module.

The MIB module containing Port information for VISM service module.

The MIB module containing Port Resource Partition information for VISM service module.

The MIB module contain the RUDP session parameter. The relationship between session set, session group and RUDP session is that: For fault tolerant case each session set contains two groups. Each grou

The MIB module containing SVC information for VISM service module.

The MIB module contain the XGCP MIB feature in VISM

The MIB module for configuring AAL2 profile elements. This table will be used in AAL2 switching and trunking applications.

The MIB module is defined to configure the Announcements feature on the Media Gateway Card. The Media Gateway Card will have the capability to play pre-recorded local announcements in switched VoIP so

This MIB is used for configuring/provisioning SPVCs on the ATM interfaces. This is used for ATM switch connection management. Terminologies used: GCRA - The Generic Cell Rate Algorithm(GCRA) is used t

This module contains ATM switch connection related real time statistical counter objects.

The MIB to manage CoS(Class of Service) queue/buffer related parameters. One or more virtual interfaces may exist on a physical interface or a channelized interface. Every virtual interface has certai

MIB module

The MIB module to configure the ATM Connections on a broad band interface in PXM1 Service module.

This MIB module contains ATM Connection related real time statistical counter objects. The ATM connections are applicable to PXM1 service module. in MGX82xx products. Logical Channel refers to ATM Con

The MIB module for ILMI configuration and ILMI statistics for broad band interface ports in PXM1 service module. PXM1 service module is supported in MGX82xx series products. The broadband interface re

The MIB module for configuration of ATM logical ports in PXM1 Service module in MGX82xx series. This MIB contains information on ATM Logical port statistics.

The MIB module to configure the Circuit Emulation connections in MGX82xx series products. Terminology: CES : Circuit Emulation Service. The CES defines a method of carrying a traffic from non-ATM tele

The MIB module to provide CES Connections statistics. This MIB is supported in Circuit Emulation Service Modules(CESM) in MGX82xx, MGX88xx products. The c

The MIB module to configure the Circuit Emulation Service(CES) ports.

The mib module to configure the resource partition on Circuit Emulation Service(CES) ports. This is applicable for service modules providing the Circuit Emulation Services.

This MIB provides configuration of Jitter buffer mode on a call and initial jitter delay value per Codec based. Prior to this, the configuration are specify on a Card based. The Card level objects vis

This MIB is used for configuring a port on an ATM switch module to be aware of feeder connection information. Terminology: AR - Auto Route, a CISCO proprietary feature, provides connection management

The Agent Capabilities for Frame Relay connection mib objects. - The capability cwFrConnCapabilityFrsm12V3R00 is for FRSM-12 module.

The MIB module to configure the Frame Relay connection configuration. Terminologies Used: SIW - Frame-Relay-to ATM Service Interworking. In SIW, the ATM port connected to a frame relay port does not n

The MIB module for frame relay connection statistics. Terminologies Used: SIW - Frame-Relay-to ATM Service Interworking FECN - Forward Explicit Congestion Notification. The FECN bit in Frame Relay hea

The Agent Capabilities for Frame Relay port mib objects. - The capability cwFrPortCapabilityFrsm12V3R00 is for FRSM-12 module.

The MIB module to create/configure frame relay ports/interfaces. This module contains tables related to frame relay port states and statistics. The frame relay logical port is referred to as 'frame re

The MIB module to configure the resource partition on Frame Relay Ports. Terminlogies used: LCN : Logical Connection Number. DLCI : Data Link Connection Identifier. A unique number assigned to a PVC e

The MIB module to configure LMI and CLLM on a frame relay ports. This mib module also contains objects to represent LMI and CLLM statistics information. The frame relay logical port is referred to as

The MIB module to configure X.21/HSSI physical and logical interfaces. This MIB module also contains alarm configuration of X.21 interfaces. Terminologies Used: HSSI : High Speed Serial Interface. The

The MIB module is defined for establishing a Trunk to transport PRI (Primary Rate Interface) signaling information over a RUDP (Reliable UDP) connection for CCS (Common Channel Signaling) VoIP(Voice O

The MIB module for managing Media Gateways (MGs). Terms used: MG: Media Gateway MGC: Media Gateway Controller MGCP: Media Gateway Control Protocol NE: Notified Entity RSIP: Restart In Progress (MGCP s

The MIB module for Media Gateways (MGs) to allow multiple Media Gateway Controllers (MGCs) to be configured and managed on the Gateway. MGCs can be group together as part of the same MGC redundancy gr

The Agent Capabilities for CISCO-WAN-MODULE-MIB. - The ciscoWanModuleCapabilityV2R00 is for ATM Switch Service Module(AXSM). - The ciscoWanModuleCapabilityV21R60 is for Enhanced ATM Switch Service Mod

The MIB module for configuring AutoRoute controller. The Portable AutoRoute(PAR) is a Controller providing routing capabilities in Network of Cisco MGX and BPX Switches. PAR controller performs follow

The MIB module for managing CA(Call Agent) events.

This MIB together with the CISCO-WAN-ATM-CONN-MIB support provisioning of PVC endpoints and SPVCs on the MGX's Route Processor Module (RPM).

The MIB module is defined for establishing connection between an endpoint and another endpoint on a remote VISM in the case of VoIP(Voice over IP) trunking application.

The MIB module to describe SONET/SDH interfaces objects. This is an extension to the standard SONET MIB(RFC 2558).

The MIB module for managing SRCP(Simple Resource Coordination Protocol) implementations. SRCP is a resource coordination protocol used between a MGC(Media Gateway Controller) and a MG(Media Gateway).

The MIB Module for BERT(Bit Error Rate Testing) using Service Resource Module(SRM). This MIB module is used for BERT on FRSM, AUSM, CESM, VISM modules. This module contains information on results from

The MIB module for configuration of bulk distribution (de-multiplexing of traffic from higher-bandwidth to lower-bandwidth interfaces). This is used for configuring bulk distribution of T3 interfaces

The MIB modules describe an ATM network service on a BPX-SES or a MGX ATM switch. This MIB module provides configuring, provisioning, as well as status gathering for ATM services. Abbreviation used: A

The MIB module for configuring T.38 fax relay protocol parameters. This MIB will be used in VoIP(Voice over IP) applications.

This MIB module is for Supporting Varbinds used only in trap defintions. The NMS applications should not depend on the implementation of these objects.The SNMP Requests(GET,GET-NEXT) may not be valid

The Agent Capabilities for CISCO-WAN-AAL2-PROFILES-MIB.

The Agent Capabilities for CISCO-WAN-ANNOUNCEMENT-MIB.

The Agent Capabilities for vismCasGrp.my .

The Agent Capabilities for CISCO-WAN-LAPD-TRUNK-MIB.

The Agent Capabilities for CISCO-WAN-MG-MIB.

The Agent Capabilities for CISCO-WAN-MGC-REDUN-MIB

The Agent Capabilities for CISCO-WAN-RTP-CONN-MIB.

The Agent Capabilities for CISCO-WAN-SRCP-MIB.

The Agent Capabilities for CISCO-WAN-T38-FAXRELAY-MIB.

The MIB module is defined to configure the programmable Tone Plan feature on VISM.

The Agent Capabilities for XGCP-MIB.

The Structure of Management Information for the stratacom enterprise.

MIB module

MIB module

MIB module

MIB module

MIB module

MIB module