CISCO-WAN-FR-RSRC-PART-MIB
The CISCO-WAN-FR-RSRC-PART-MIB enables the configuration and monitoring of resource partitions on Cisco Frame Relay interfaces to manage bandwidth allocation and traffic shaping for specific Data Link Connection Identifiers (DLCIs). It facilitates the definition of Logical Connection Numbers (LCNs) and PVC endpoints to enforce quality of service (QoS) policies and isolate traffic flows within the user's access channel.
Imported Objects
Objects
17 total| Object Name |
|---|
frPortCnfResPartGrpTableThis table is for configuring resource partition parameters. A resource partition is configured on frame relay port. The frame relay port if available in ifTable is identified by ifType values frameRelayService(44) and frForward(158). SEQUENCE OF FrPortCnfResPartGrpEntry .1.3.6.1.4.1.351.110.5.1.1.1.5.1 |
frPortCnfResPartGrpEntryAn entry for a resource partition. A resource partition has to be created before connections can be added on a frame relay port. FrPortCnfResPartGrpEntry .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1 |
frResPartPortNumThe value of this object identifies the frame relay port. The value of this object must be same as the value of 'portNum' from frPortCnfPortGrpTable. If frame relay port is available in ifTable, then the value of this object must be same as the ifIndex value of frame relay ports with ifType frameRelayService(44) and frForward(158).ro Integer32 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.1 |
frResPartCtrlrNumThis object identifies the controller which can be used for accessing the resources. The possible values are : par(1) : Portable Auto Route controller. : This value is applicable in Release 1.x. pnni(2): PNNI Controller. : This value is applicable in Release 2.x. tag(3) : MPLS(Formerly known as Tag Switch)Controllerro Enumeration .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.2 |
frResPartRowStatusThis object is used for adding/deleting/modifying resource partition on a frame relay port. In MGX Release 1.x: To add an entry, this object should be set to add, value for other objects should not be specified. FRSM will choose default values for all other objects. In MGX Release 2.x: To add an entry, this object should be set to add, value for frResPartCtrlrID may be specified. FRSM will choose default values for all other objects. To delete an entry, this object has to be set to del. Currently the value mod is not supported. The resource partition can be deleted only after deleting all the connections (LCNs).rw Enumeration .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.3 |
frResPartNumOfLcnAvailThis represents number of LCNs available for this controller and this port. FRSM VHS 2CT3 can support LCNs upto 4000. FRSM12 can support LCNs upto 16000.rw Integer32 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.4 |
frResPartDlciLowThis represents low end of reserved DLCI.rw Integer32 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.5 |
frResPartDlciHighThis represents high end of reserved DLCI.rw Integer32 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.6 |
frResPartIngrPctBWThe percentage of total ingress bandwidth reserved.rw Integer32 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.7 |
frResPartEgrPctBWThe percentage of total egress bandwidth reserved.rw Integer32 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.8 |
frResPartCtrlrIDThis is the controller identifier for the resource patition. The default value is set for PNNI controller. Refer object frResPartCtrlrNum.rw Integer32 .1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.9 |
ciscoWanFrRsrcPartMIBThe MIB module to configure the resource partition on Frame Relay Ports. Terminlogies used: LCN : Logical Connection Number. DLCI : Data Link Connection Identifier. A unique number assigned to a PVC endpoint in a frame relay network. This identifies a particular PVC endpoint within a user's access channel in a frame relay network and has local significance only to that channel. MODULE-IDENTITY .1.3.6.1.4.1.351.150.45 |
cwfRsrcPartMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.45.2 |
cwfRsrcPartMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.45.2.1 |
ciscoWanFrRsrcPartComplianceThe compliance statement for entities which implement the Frame Relay Resource Partition MIB. Unknown .1.3.6.1.4.1.351.150.45.2.1.1 |
cwfRsrcPartMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.45.2.2 |
ciscoWanFrRsrcPartGroupA collection of objects providing the Frame Relay Port resource partition configuration information. Unknown .1.3.6.1.4.1.351.150.45.2.2.1 |
More MIBs from Stratacom
Browse all StratacomMIBs →Standard SNMP MIB module defining data structures for CISCO-WAN-AXIPOP-MIB.
Standard SNMP MIB module defining data structures for STRATACOM-MIB.
The CISCO-WAN-SVC-MIB manages ATM service provisioning, configuration, and status monitoring on Cisco BPX-SES and MGX ATM switches, specifically tracking XPVC/XPVP segments, OAM cell handling, and ENNI auto-discovery via ILMI. It facilitates the administration of ATM traffic classes (CBR, VBR, UBR, ABR) and virtual circuit states (SVC, SPVC) across User-Network and Network-Network interfaces.
Standard SNMP MIB module defining data structures for CISCO-MGX82XX-SONET-MIB.
The CISCO-MGX82XX-DSX3-MIB enables configuration and monitoring of DS3/E3 interface parameters, including alarm states (AIS, LOF, RAI), performance statistics, and Bit Error Rate Testing (BERT) on Cisco MGX 8220/8230 T3/E3 service modules such as the CESM-T3E3 and FRSM-VHS. This module facilitates the management of physical layer convergence procedures (PLCP) and maintenance byte fields (Tx/Rx MA) defined by ITU-T G.832 for channelized T3 and E3 circuits.
The CISCO-WAN-PAR-MIB manages the Portable AutoRoute (PAR) controller on Cisco MGX and BPX switches to provision, monitor, and alarm connections while controlling LMI communication and clocking selection. It enables the configuration of routing capabilities, failure event conditioning, and the management of feeder-to-node signaling and switch synchronization.