CISCO-WAN-SVC-MIB
AI MIB Summary
The CISCO-WAN-SVC-MIB manages ATM service provisioning, configuration, and status monitoring on Cisco BPX-SES and MGX ATM switches, specifically tracking XPVC/XPVP segments, OAM cell handling, and ENNI auto-discovery via ILMI. It facilitates the administration of ATM traffic classes (CBR, VBR, UBR, ABR) and virtual circuit states (SVC, SPVC) across User-Network and Network-Network interfaces.
The MIB modules describe an ATM network service on a BPX-SES or a MGX ATM switch. This MIB module provides configuring, provisioning, as well as status gathering for ATM services. Abbreviation used: ABR -- Available Bit Rate AINI -- ATM Inter-Network Interface ATM -- Asynchronous Transfer Mode BGN -- Begin BW -- Bandwidth CBR -- Constant Bit Rate ENNI -- Enhanced Network to Network Interface Note: The 'ENNI' term used here indicating 'enhanced' or 'friendly' NNI for linking two networks of CISCO AutoRoute or PNNI switches. The XPVCs and XPVPs are provisioned across them. Functionality includes changing segment OAM cell handling so that these cells flow over 'end-to-end OAM segment' loops for the provisioned length of the XPVC or XPVP, i.e. the 'segment' comprises the two or three segments between the user ports. Also implemented at ENNIs is an LMI functionality that enables auto-discovery of the ENNIs. ER -- Error Recovery GAT -- Generic Application Transport IE -- Information Element IISP -- Interim Inter-Switch Signaling Protocol ILMI -- Interim Local Management Interface MD -- Management Data PNNI -- Private Network-Network Interface RS -- Resynchronization REJ -- Rejection SD -- Sequence Data SDP -- Sequence Data with Poll SPVC -- Soft Permanent Virtual Circuit SSCOP -- Service Specific Connection Oriented Protocol SVC -- Switched Virtual Circuit UBR -- Unspecified Bit Rate UD -- Unit Data UNI -- User-Network Interface USTAT -- Unsolicited STAT VBR -- Variable Bit Rate
Main OID:
ciscoWANSvcMIB.1.3.6.1.4.1.351.140
450
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
450 total| Object Name |
|---|
ciscoWANSvcMIBThe MIB modules describe an ATM network service on a BPX-SES or a MGX ATM switch. This MIB module provides configuring, provisioning, as well as status gathering for ATM services. Abbreviation used: ABR -- Available Bit Rate AINI -- ATM Inter-Network Interface ATM -- Asynchronous Transfer Mode BGN -- Begin BW -- Bandwidth CBR -- Constant Bit Rate ENNI -- Enhanced Network to Network Interface Note: The 'ENNI' term used here indicating 'enhanced' or 'friendly' NNI for linking two networks of CISCO AutoRoute or PNNI switches. The XPVCs and XPVPs are provisioned across them. Functionality includes changing segment OAM cell handling so that these cells flow over 'end-to-end OAM segment' loops for the provisioned length of the XPVC or XPVP, i.e. the 'segment' comprises the two or three segments between the user ports. Also implemented at ENNIs is an LMI functionality that enables auto-discovery of the ENNIs. ER -- Error Recovery GAT -- Generic Application Transport IE -- Information Element IISP -- Interim Inter-Switch Signaling Protocol ILMI -- Interim Local Management Interface MD -- Management Data PNNI -- Private Network-Network Interface RS -- Resynchronization REJ -- Rejection SD -- Sequence Data SDP -- Sequence Data with Poll SPVC -- Soft Permanent Virtual Circuit SSCOP -- Service Specific Connection Oriented Protocol SVC -- Switched Virtual Circuit UBR -- Unspecified Bit Rate UD -- Unit Data UNI -- User-Network Interface USTAT -- Unsolicited STAT VBR -- Variable Bit Rate MODULE-IDENTITY .1.3.6.1.4.1.351.140 |
ciscoWANSvcMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1 |
ciscoWANSvcInfo OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.1 |
cwsSwRevisionPNNI network controller software revision number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.1.1 |
cwsControllerStatusThe administrative status for the pnni active controller.ro CwspControllerState .1.3.6.1.4.1.351.140.1.1.6 |
cwspPnniStndbyControllerStatusThe administrative status for the standby controller.ro CwspControllerState .1.3.6.1.4.1.351.140.1.1.7 |
cwspPnniControllerStatusThe administrative status of the pnni controller. Note: this object is only used in the trap varbind, snmp get operation is meaningless.ro Enumeration .1.3.6.1.4.1.351.140.1.1.8 |
cwspPnniControllerPhySlotThe pnni controller physical location for MGX or BPX-SES. Note: this object is only used in the trap varbind, snmp get operation is meaningless.ro Integer32 .1.3.6.1.4.1.351.140.1.1.9 |
ciscoWANSvcPort OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2 |
cwspConfig OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.1 |
cwspConfigTableThe Interface configuration table collects attributes that affect the operation of the controller interface. There is a single row for each interface that the managed system is expected to be added or managed. SEQUENCE OF CwspConfigEntry .1.3.6.1.4.1.351.140.1.2.1.1 |
cwspConfigEntryAn entry in the interface configuration table containing information about an interface CwspConfigEntry .1.3.6.1.4.1.351.140.1.2.1.1.1 |
cwspAdminStatusThe administrative status of the interface. inService (1) means that the interface is operational while outService (2) indicates that the interface is put out of service by the administrator.rw Enumeration .1.3.6.1.4.1.351.140.1.2.1.1.1.1 |
cwspOperStatusThe operational state of the interface. This status is derived from the physical state of the interface. failed (2) indicates that the interface has failed. ok (1) indicates that the interface is in operational status, while other (3) denotes that the interface is in an unknown state.ro Enumeration .1.3.6.1.4.1.351.140.1.2.1.1.1.2 |
cwspSvcBlockedIndicates whether Switches virtual connections are allowed through this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.1.1.1.3 |
cwspSpvcBlockedIndicates whether soft permanent virtual connections are allowed through this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.1.1.1.4 |
cwspIlmiAddrRegEnableIndicates whether ILMI address registration is enabled or disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.1.1.1.5 |
cwspIlmiAutoConfEnableIndicates whether auto-configuration of the interface is turned on or off. If auto-configuration is enabled, then the interface comes up using the ILMI auto-configuration.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.1.1.1.6 |
cwspIlmiServRegEnableIndicates whether service registry is enabled or disabled on the interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.1.1.1.7 |
cwspPhyIdentifierIndicates the physical identification of the interface. Mandatory when the port is provisioned for the first time through SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.1.1.1.8 |
cwspSignallingVpiDenotes the Signaling VPI used on the interface.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.9 |
cwspSignallingVciIndicates the signaling VCI used on the interface, acceptable value is 32-65535, and 5 being the default.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.10 |
cwspRoutingVpiIndicates the VPI used for PNNI lowest level RCC.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.11 |
cwspRoutingVciIndicates the VCI used for the PNNI lowest level RCC, acceptable value is 32-65535, and 18 being the default.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.12 |
cwspMaxVpiBitsThe maximum number of active VPI bits on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections used by PNNI), this value has no meaning and is set to zero.ro Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.13 |
cwspMaxVciBitsThe maximum number of active VCI bits on this ATM Interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.14 |
cwspUniVersionAn indication of the latest version of the ATM Forum UNI Signaling Specification that is supported on this ATM Interface. If this value is not present, a version of the UNI earlier than 3.1 is supported. The value of 'self(9)' indicates this entry is a voice port. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed.rw Enumeration .1.3.6.1.4.1.351.140.1.2.1.1.1.15 |
cwspNniVersionAn indication of the latest version of the ATM Forum PNNI Signaling Specification that is supported on this ATM Interface. Note that the PNNI routing version is not determined through ILMI. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed.rw Enumeration .1.3.6.1.4.1.351.140.1.2.1.1.1.16 |
cwspUniTypeThe type of the ATM device, either public or private.rw Enumeration .1.3.6.1.4.1.351.140.1.2.1.1.1.17 |
cwspSideThis object determines the type of the ATM device. This object is used in automatic ATM Interface-Type determination procedure such that a correct operational ATM Interface-type can be determined. An ATM End System shall take the value of user(1), and an ATM network node shall take the value of node(2).rw Enumeration .1.3.6.1.4.1.351.140.1.2.1.1.1.18 |
cwspMaxP2pCallsIndicates the maximum number of point to point calls (including VCs and VPs allowed on the interface.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.19 |
cwspMaxP2mpRootsIndicates the maximum number of root VCs (for point-to-multipoint) allowed on the interface.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.20 |
cwspMaxP2mpLeafsIndicates the maximum number of leaf VCs (for point-to-multipoint) allowed on the interface.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.21 |
cwspMinSvccVpiIndicates the minimum SVCC VPI configured on the interface.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.22 |
cwspMaxSvccVpiIndicates the maximum SVCC VPI configured on the interface.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.23 |
cwspMinSvccVciIndicates the minimum SVCC VCI configured on the interface.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.24 |
cwspMaxSvccVciIndicates the maximum SVCC VCI configured on the interface.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.25 |
cwspMinSvpcVpiIndicates the minimum SVPC VPI configured on the interface.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.26 |
cwspMaxSvpcVpiIndicates the maximum SVPC VPI configured on the interface.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.27 |
cwspEnhancedIispIndicates whether the enhanced features for IISP are enabled or disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.1.1.1.28 |
cwspConfigTableRowStatusUsed to create and delete the Interface. However, only createAndGo, destroy, active and notInService are supported. NMS should only use createAndGo to create a row and destroy to delete a row. The managed device will either return active or notInService for a row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.1.1.1.29 |
cwspAddrPlanSupportedThe ATM address plan supported on an interface. This can only be modified if interface is public UNI. For all other interfaces, the value is aesa.rw Enumeration .1.3.6.1.4.1.351.140.1.2.1.1.1.30 |
cwspIlmiSecureLinkIndicates whether ILMI Secure Link Protocol is enabled or disabled. When secure link protocol is enabled, loss in ILMI connectivity is treated as loss of attachment point which results in all SVCs/SVPs being released on the interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.1.1.1.31 |
cwspIlmiAttachmentPointIndicates whether detection of loss of attachment procedures are enabled on this interface. When set to true, then standard ILMI procedures are employed to detect loss of attachment point. If set to false, then ILMI protocol on the interface does not detect the loss of attachment.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.1.1.1.32 |
cwspIlmiLocalAttrStdIndicates whether on modification of local attributes, procedures as recommended by ILMI 4.0 specification are followed or cisco proprietery procedures are followed. When set to true, the standard ILMI procedures are followed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.1.1.1.33 |
cwspIlmiUCSMEnableIndicates whether ILMI user connection status monitoring is enabled or disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.1.1.1.34 |
cwspRoutingPriorityThis object is the routing priority to be assigned to connections which enter the network from this ingress interface, but does not carry the routing priority signaling in the SETUP message. SETUP message. A default routing priority of 8 is used if this object is not configured. A routing priority 1 is the highest priority for a user connection. A connection tagged with a routing priority of 1 is derouted ahead of connections tagged with other priority values.rw Integer32 .1.3.6.1.4.1.351.140.1.2.1.1.1.35 |
cwspSpvcAddressThis object identifies the internal NSAP assigned to a port by the switch. a) The format is that of 13-byte node prefix and 7-byte port number. b) When the switch's node prefix is modified, the node prefix part of this variable is also changed accordingly. Note: the switch's node prefix cannot be changed if there are connections on the switch. c) The port number can be physical port identifier or the ifIndex of this port.ro CiscoWanNsapAtmAddress (CISCO-WAN-ATM-CONN-MIB) .1.3.6.1.4.1.351.140.1.2.1.1.1.36 |
cwspCacConfig OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.2 |
cwspCacConfigTableA table specifying the CAC(Connection Admission Control) information for each interface. SEQUENCE OF CwspCacConfigEntry .1.3.6.1.4.1.351.140.1.2.2.1 |
cwspCacConfigEntryAn entry contains CAC information. CwspCacConfigEntry .1.3.6.1.4.1.351.140.1.2.2.1.1 |
cwspUtilFactorCbrThis is the booking factor for CBR service.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.1 |
cwspUtilFactorRtVbrThis is the booking factor for real time VBR servicerw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.2 |
cwspUtilFactorNrtVbrThis is the booking factor for non-real time VBR servicerw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.3 |
cwspUtilFactorAbrThis is the booking factor for ABR servicerw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.4 |
cwspUtilFactorUbrThis is the booking factor for UBR service.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.5 |
cwspMaxBwCbrThis is the maximum bandwidth for CBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.6 |
cwspMaxBwRtVbrThis is the maximum bandwidth for real time VBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.7 |
cwspMaxBwNrtVbrThis is the maximum bandwidth for non-real time VBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.8 |
cwspMaxBwAbrThis is the maximum bandwidth for ABR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.9 |
cwspMaxBwUbrThis is the maximum bandwidth for UBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.10 |
cwspMinBwCbrThis is the minimum bandwidth for CBR service in percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.11 |
cwspMinBwRtVbrThis is the minimum bandwidth for real time VBR service in percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.12 |
cwspMinBwNrtVbrThis is the minimum bandwidth for non-real time VBR service in percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.13 |
cwspMinBwAbrThis is the minimum bandwidth for ABR service in percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.14 |
cwspMinBwUbrThis is the minimum bandwidth for UBR service in percentage. The value for this variable is always 0.ro Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.15 |
cwspMaxVcCbrThis is the maximum number of VCs for CBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.16 |
cwspMaxVcRtVbrThis is the maximum number of VCs for real time VBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.17 |
cwspMaxVcNrtVbrThis is the maximum number of VCs for non-real time VBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.18 |
cwspMaxVcAbrThis is the maximum number of VCs for ABR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.19 |
cwspMaxVcUbrThis is the maximum number of VCs for UBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.20 |
cwspMinVcCbrThis is the minimum number of VCs for CBR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. This variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.21 |
cwspMinVcRtVbrThis is the minimum number of VCs for real time VBR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.22 |
cwspMinVcNrtVbrThis is the minimum number of VCs for non-real time VBR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr,cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.23 |
cwspMinVcAbrThis is the minimum number of VCs for ABR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.24 |
cwspMinVcUbrThis is the minimum number of VCs for UBR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.25 |
cwspMaxVcBwCbrThis is the maximum bandwidth allowed for a VC for real time CBR service. The value is in the unit of cells per second.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.26 |
cwspMaxVcBwRtVbrThis is the maximum bandwidth allowed for a VC for real time VBR service. The value is in the unit of cells per second.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.27 |
cwspMaxVcBwNrtVbrThis is the maximum bandwidth allowed for a VC for non-real time VBR service. The value is in the unit of cells per second.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.28 |
cwspMaxVcBwAbrThis is the maximum bandwidth allowed for a VC for ABR service. The value is in the unit of cells per second.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.29 |
cwspMaxVcBwUbrThis is the maximum bandwidth allowed for UBR service. The value is in the unit of cells per second.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.30 |
cwspDefaultCdvtCbrThis is the default CDVT for CBR service.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.31 |
cwspDefaultCdvtRtVbrThis is the default CDVT real time VBR service.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.32 |
cwspDefaultCdvtNrtVbrThis is the default CDVT non-real time VBR service.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.33 |
cwspDefaultCdvtAbrThis is the default CDVT for ABR service.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.34 |
cwspDefaultCdvtUbrThis is the default CDVT for UBR service.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.35 |
cwspDefaultMbsRtVbrThis is the default MBS real time VBR service.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.36 |
cwspDefaultMbsNrtVbrThis is the default MBS non-real time VBR service.rw Integer32 .1.3.6.1.4.1.351.140.1.2.2.1.1.37 |
cwspSigConfig OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.3 |
cwspSigConfigTableThis table specifies signaling configuration parameters. SEQUENCE OF CwspSigConfigEntry .1.3.6.1.4.1.351.140.1.2.3.1 |
cwspSigConfigEntryAn entry in the signaling configuration table. Each entry indexed by the ifIndex of a port. CwspSigConfigEntry .1.3.6.1.4.1.351.140.1.2.3.1.1 |
cwspSigCfgT301Timer started when ALERT message received at Call Received State. Normally, timer is stopped when CONNECT message is received. Clear call at first expiry.rw Integer32 .1.3.6.1.4.1.351.140.1.2.3.1.1.1 |
cwspSigCfgT303Timer started when SETUP message sent at Call Present State. Normally, timer is stopped when ALERT, CONNECT, RELEASE COMPLETE or CALL PROCEEDING message is received. Resend SETUP message and restart the timer at first expiry; Clear network connection and enter NULL state at second expiry.rw Integer32 .1.3.6.1.4.1.351.140.1.2.3.1.1.2 |
cwspSigCfgT308Timer started when RELEASE message sent at Release Indication State. Normally, timer is stopped when RELEASE COMPLETE or RELEASE message is received. Resend RELEASE and restart the timer at first expiry; Release call reference and enter NULL state at second expiry.rw Integer32 .1.3.6.1.4.1.351.140.1.2.3.1.1.3 |
cwspSigCfgT310Timer started when CALL PROCEEDING message received at Incoming Call Proceeding State. Normally, timer is stopped when ALERT, CONNECT or RELEASE message is received. Clear call at first expiry. Range from 10 to 20 seconds for UNI 3.0/3.1 with default of 10; 30 to 120 seconds for UNI 4.0 with default of 30, default number can be 10 or 30, 10 is used.rw Integer32 .1.3.6.1.4.1.351.140.1.2.3.1.1.4 |
cwspSigCfgT316Timer started when RESTART message sent Restart Request State. Normally, timer is stopped when RESTART ACK message is received. RESTART may be sent multiple times in both first or second expiry.rw Integer32 .1.3.6.1.4.1.351.140.1.2.3.1.1.5 |
cwspSigCfgT317Timer started when RESTART message received at Restart State. Normally, timer is stopped when Internal clearing of call references happen. Maintenance notification at first expiry. The value of this timer should be less than T316.rw Integer32 .1.3.6.1.4.1.351.140.1.2.3.1.1.6 |
cwspSigCfgT322Timer started when STATUS ENQUIRY message sent at any call state. Normally, timer is stopped when STATUS RELEASE or RELEASE COMPLETE message is received. STATUS ENQUIREY message may be resent several times in both first or second expiry.rw Integer32 .1.3.6.1.4.1.351.140.1.2.3.1.1.7 |
cwspSigCfgT397Timer started when ALERTING or PARTY ALERTING message received in point-to-multipoint call. Normally timer is stopped when ADD PARTY ACK message is received. Clear party at first expiry.rw Integer32 .1.3.6.1.4.1.351.140.1.2.3.1.1.8 |
cwspSigCfgT398Timer is started when DROP PARTY message sent at Drop Party Initiated State. Normally, timer is stopped when DROP PARTY ACK or RELEASE message is received. Send DROP PARTY ACK or RELEASE at first expiry.rw Integer32 .1.3.6.1.4.1.351.140.1.2.3.1.1.9 |
cwspSigCfgT399Timer is started when ADD PARTY message sent at Add Party Initiated State. Normally, timer is stopped when ADD PARTY ACK, ADD PARTY REJ or RELEASE message is received. Clear the party and enter NULL Party State at first expiry. Range from 14 to 28 seconds for UNI 3.0/3.1 with default of 14; 34 to 124 seconds for UNI 4.0 with default of 34, default can be 14 or 34, 14 is used.rw Integer32 .1.3.6.1.4.1.351.140.1.2.3.1.1.10 |
cwspSscopConfig OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.4 |
cwspSscopTableThis table specifies SSCOP (Layer 2) configuration parameters. SEQUENCE OF CwspSscopEntry .1.3.6.1.4.1.351.140.1.2.4.1 |
cwspSscopEntryAn entry in the SSCOP configuration table. Each entry indexed by the ifIndex of a port. CwspSscopEntry .1.3.6.1.4.1.351.140.1.2.4.1.1 |
cwspSscopTmrCCThis object contains the value for Connection control timer.rw Integer32 .1.3.6.1.4.1.351.140.1.2.4.1.1.1 |
cwspSscopTmrKeepAliveThis object contains the value for keep alive timerrw Integer32 .1.3.6.1.4.1.351.140.1.2.4.1.1.2 |
cwspSscopTmrNoRespThis object contains the value for no response timer.rw Integer32 .1.3.6.1.4.1.351.140.1.2.4.1.1.3 |
cwspSscopTmrPollThis object contains the value for poll timer.rw Integer32 .1.3.6.1.4.1.351.140.1.2.4.1.1.4 |
cwspSscopTmtIdleThis object contains the value for idle timer.rw Integer32 .1.3.6.1.4.1.351.140.1.2.4.1.1.5 |
cwspSscopMaxCCThis object contains the upper limit for the number of transmissions of a BGN, END, ER or RS PDU.rw Integer32 .1.3.6.1.4.1.351.140.1.2.4.1.1.6 |
cwspSscopMaxPDThis object contains an upper limit for a counter which counts the number of SD PDUs transmitted between transmissions of POLL PDUs or the number of SD PDUs transmitted before the transmission of the first POLL PDU after POLL timer became active.rw Integer32 .1.3.6.1.4.1.351.140.1.2.4.1.1.7 |
cwspSscopMaxSTATThis object contains an upper limit for the number of list elements placed in a STAT PDU.rw Integer32 .1.3.6.1.4.1.351.140.1.2.4.1.1.8 |
cwspCallStats OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.5 |
cwspCallStatsTableThis Table contains objects showing the Statistics for SVC/SPVC calls on a given interface. SEQUENCE OF CwspCallStatsEntry .1.3.6.1.4.1.351.140.1.2.5.1 |
cwspCallStatsEntryAn entry contains SVC/SPVC call statistics CwspCallStatsEntry .1.3.6.1.4.1.351.140.1.2.5.1.1 |
cwspCountResetWriting a 2 to this object resets all counters.rw Enumeration .1.3.6.1.4.1.351.140.1.2.5.1.1.1 |
cwspInCallAttemptsThis object shows the number of incoming Signaling messages (Setup and Add Party) received by the switching node on this interface for Call establishment.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.2 |
cwspInCallEstabsThis object shows the number of incoming Signaling Messages (Connect and Add Party Ack) received by the switching node on this interface which marks that a call has been successfully established.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.3 |
cwspInCallFailuresThis object shows the total number of incoming Point-to-Point (p2p) and Point-to-MultiPoint(p2mp) SVC/SPVC call attempts failed on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.4 |
cwspInFilterFailuresThis object shows the number of incoming Point-to-Point(p2p) and Point-to-MultiPoint(p2mp) SVC/SPVC call attempts which failed due to address filtering on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.5 |
cwspInRouteFailuresThis object shows the number of incoming Point-to-Point(p2p) and Point-to-MulitPoint(p2mp) SVC/SPVC call attempts on this interface which failed because there was no route to the destination available.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.6 |
cwspInResrcFailuresThis object shows the number of incoming Point-to-Point(p2p) and Point-to-MulitPoint(p2mp) SVC/SPVC call attempts on this interface which failed because there were not enough resources as requested in the parameters of the call.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.7 |
cwspInTimerFailuresThis object shows the number of signaling timers timed out for incoming Point-to-Point(p2p) and Point-to-MultiPoint(p2mp) SVC/SPVC calls on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.8 |
cwspInCrankbacksThis object shows the number of Crankback IEs received on this interface for incoming Point-to-Point(p2p) and Point-to-MultiPoint (p2mp) SVC/SPVC call attempts.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.9 |
cwspOutCallAttemptsThis object shows the number of outgoing Signaling messages (Setup and Add Party) on this interface for Call establishment.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.10 |
cwspOutCallEstabsThis object shows the number of outgoing Signaling messages (Connect and Add Party Ack) which mark the call being established on this interfacero Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.11 |
cwspOutCallFailuresThis object shows the total number of outgoing Signaling messages for Point-to-Point and Point-to-MultiPoint call establishment on this interface which failed.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.12 |
cwspOutFilterFailuresThis object shows the number of outgoing Signaling messages for call establishment on this interface which failed the address filtering.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.13 |
cwspOutRouteFailuresThis object shows the number of outgoing Signaling messages for call establishment on this interface which failed because the route was not available.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.14 |
cwspOutResrcFailuresThis object shows the number of outgoing Signaling messages for call establishment on this interface which failed because the resource requested was not available.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.15 |
cwspOutTimerFailuresThis object shows the number of Signaling timers timed-out on this interface for outgoing signaling messages.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.16 |
cwspOutCrankbacksThis object shows the number of Crankback IEs being sent on this interface for outgoing signaling Release messages. This is generated on the node which generates the Crankback IEs.ro Counter32 .1.3.6.1.4.1.351.140.1.2.5.1.1.17 |
cwspSigStats OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.6 |
cwspSigStatsTableThis table contains signaling statistics counters SEQUENCE OF CwspSigStatsEntry .1.3.6.1.4.1.351.140.1.2.6.1 |
cwspSigStatsEntryAn entry contains signaling statistics. CwspSigStatsEntry .1.3.6.1.4.1.351.140.1.2.6.1.1 |
cwspSigCounterResetWriting a 2 to this object resets the all Sig counters.rw Enumeration .1.3.6.1.4.1.351.140.1.2.6.1.1.1 |
cwspCallProcRcvNumber of CALL PROCEEDING messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.2 |
cwspConnectRcvNumber of CONNECT messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.3 |
cwspConnectAckRcvNumber of CONNECT ACK messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.4 |
cwspSetupRcvNumber of SETUP messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.5 |
cwspReleaseRcvNumber of RELEASE messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.6 |
cwspReleaseComplRcvNumber of RELEASE COMPLETE messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.7 |
cwspRestartRcvNumber of RESTART messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.8 |
cwspRestartAckRcvNumber of RESTART ACK messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.9 |
cwspStatusRcvNumber of STATUS messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.10 |
cwspStatusEnqRcvNumber of STATUS ENQUIRY messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.11 |
cwspNotifyRcvNumber of NOTIFY messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.12 |
cwspAlertRcvNumber of ALERT messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.13 |
cwspProgressRcvNumber of PROGRESS messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.14 |
cwspAddPtyRcvNumber of ADD PARTY messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.15 |
cwspAddPtyAckRcvNumber of ADD PARTY ACK messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.16 |
cwspAddPtyRejRcvNumber of ADD PARTY REJECT messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.17 |
cwspDropPtyRcvNumber of DROP PARTY messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.18 |
cwspIncorrectMsgRcvNumber of Incorrect messages received on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.20 |
cwspTimerExpiriesNumber of timeouts occurred on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.21 |
cwspLastCauseto indicate the last cause of release or cranckback.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.22 |
cwspLastDiagnosticto indicate the last diagnostic of release or cranckback.ro Integer32(-2147483648..214743647) .1.3.6.1.4.1.351.140.1.2.6.1.1.23 |
cwspCallProcXmtNumber of CALL PROCEEDING messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.24 |
cwspConnectXmtNumber of CONNECT messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.25 |
cwspConnectAckXmtNumber of CONNECT ACK messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.26 |
cwspSetupXmtNumber of SETUP messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.27 |
cwspReleaseXmtNumber of RELEASE messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.28 |
cwspReleaseComplXmtNumber of RELEASE COMPLETE messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.29 |
cwspRestartXmtNumber of RESTART messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.30 |
cwspRestartAckXmtNumber of RESTART ACK messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.31 |
cwspStatusXmtNumber of STATUS messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.32 |
cwspStatusEnqXmtNumber of STATUS ENQUIRY messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.33 |
cwspNotifyXmtNumber of NOTIFY messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.34 |
cwspAlertXmtNumber of ALERT messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.35 |
cwspProgressXmtNumber of PROGRESS messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.36 |
cwspAddPtyXmtNumber of ADD PARTY messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.37 |
cwspAddPtyAckXmtNumber of ADD PARTY ACK messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.38 |
cwspAddPtyRejXmtNumber of ADD PARTY REJECT messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.39 |
cwspDropPtyXmtNumber of DROP PARTY messages transmitted from this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.6.1.1.40 |
cwspSscopStatusSscop link status on an NNI interface, object is meaningful along with ciscoWANSscopLinkChange trap.ro Enumeration .1.3.6.1.4.1.351.140.1.2.6.1.1.42 |
cwspSscopStats OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.7 |
cwspSscopStatsTableThis table contains SSCOP (Layer 2) statistics counters. SEQUENCE OF CwspSscopStatsEntry .1.3.6.1.4.1.351.140.1.2.7.1 |
cwspSscopStatsEntryAn entry contains SSCOP (Layer 2) statistics. CwspSscopStatsEntry .1.3.6.1.4.1.351.140.1.2.7.1.1 |
cwspSscopCounterResetThis object specifies whether the SSCOP statistics collected for this interface needs to be reset.rw Enumeration .1.3.6.1.4.1.351.140.1.2.7.1.1.1 |
cwspSscopIgnoredPduRcvThis object stores the number of SSCOP PDUs that are received but ignored due to incorrect size, invalid PDU, unknown PDU type.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.2 |
cwspSscopBgnRcvThis object stores the number of SSCOP BGN PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.3 |
cwspSscopBgakRcvThis object stores the number of SSCOP BGN ACK PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.4 |
cwspSscopEndRcvThis object stores the number of SSCOP END PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.5 |
cwspSscopEndakRcvThis object stores the number of SSCOP END ACK PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.6 |
cwspSscopRsRcvThis object stores the number of SSCOP RS(Resync) PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.7 |
cwspSscopRsakRcvThis object stores the number of SSCOP RS(Resync) ACK PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.8 |
cwspSscopBgrejRcvThis object stores the number of SSCOP BGN REJ PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.9 |
cwspSscopSdRcvThis object stores the number of SSCOP SD (Sequenced Data) PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.10 |
cwspSscopSdpRcvThis object stores the number of SSCOP SDP (Sequenced Data with Poll) PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.11 |
cwspSscopPollRcvThis object stores the number of SSCOP POLL PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.12 |
cwspSscopStatRcvThis object stores the number of SSCOP STAT PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.13 |
cwspSscopUstatRcvThis object stores the number of SSCOP USTAT (Unsolicited STAT) PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.14 |
cwspSscopUdRcvThis object stores the number of SSCOP UD (Unit data) PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.15 |
cwspSscopMdRcvThis object stores the number of SSCOP MD (Management data) PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.16 |
cwspSscopErakRcvThis object stores the number of SSCOP ER ACK (error recovery ack) PDUs received at this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.17 |
cwspSscopBgnXmtThis object stores the number of SSCOP BGN PDUs transmitted over this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.18 |
cwspSscopBgakXmtThis object stores the number of SSCOP BGN ACK PDUs transmitted on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.19 |
cwspSscopEndXmtThis object stores the number of SSCOP END PDUs transmitted on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.20 |
cwspSscopEndakXmtThis object stores the number of SSCOP END ACK PDUs transmitted on this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.21 |
cwspSscopRsXmtThis object stores the number of SSCOP RS (Resync) PDUs transmitted over this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.22 |
cwspSscopRsakXmtThis object stores the number of SSCOP RS (Resync) ACK PDUs transmitted over this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.23 |
cwspSscopBgrejXmtThis object stores the number of SSCOP BGN REJ PDUs transmitted over this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.24 |
cwspSscopSdXmtThis object stores the number of SSCOP SD transmitted over this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.25 |
cwspSscopSdpXmtThis object stores the number of SSCOP SDP PDUs transmitted over this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.26 |
cwspSscopPollXmtThis object stores the number of SSCOP POLL PDUs transmitted over this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.27 |
cwspSscopStatXmtThis object stores the number of SSCOP STAT PDUs transmitted over this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.28 |
cwspSscopUstatXmtThis object stores the number of SSCOP USTAT PDUs transmitted over this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.29 |
cwspSscopUdXmtThis object stores the number of SSCOP UD PDUs transmitted over this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.30 |
cwspSscopMdXmtThis object stores the number of SSCOP MD PDUs transmitted over this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.31 |
cwspSscopErakXmtThis object stores the number of SSCOP ER(error recovery) ACK PDUs transmitted over this interface.ro Counter32 .1.3.6.1.4.1.351.140.1.2.7.1.1.32 |
cwspCall OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.8 |
cwspCallTableThis Table contains the objects which show parameters associated with a Point-to-Point(p2p) or Point-to-MultiPoint (p2mp) SVC/SPVC call. SEQUENCE OF CwspCallEntry .1.3.6.1.4.1.351.140.1.2.8.1 |
cwspCallEntryThis object shows the multiple key index to get the Call record information. The key comprise of Interface Index, VPI/VCI value and Call Reference Value for the call. CwspCallEntry .1.3.6.1.4.1.351.140.1.2.8.1.1 |
cwspCallVpiThis object shows the VPI value of the call on this interface. Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.1 |
cwspCallVciThis object shows The VCI value of the call on this interface. The value should be in the range of 32-65535 (0=SPVP). Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.2 |
cwspCallLeafReferenceThis object shows the value of the Leaf Reference (EndPointReference) of the Call on this interface. Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.3 |
cwspCallCallRefThis object shows the Call Reference value of the call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.4 |
cwspCallCallingAddressThis object shows the Calling Party Address of the call.ro AtmAddress .1.3.6.1.4.1.351.140.1.2.8.1.1.5 |
cwspCallCalledAddressThis object shows the Called Party Address of the call.ro AtmAddress .1.3.6.1.4.1.351.140.1.2.8.1.1.6 |
cwspCallCallingSubAddrThis object shows the Calling Party Subaddress of the call.ro AtmAddress .1.3.6.1.4.1.351.140.1.2.8.1.1.7 |
cwspCallCalledSubAddrThis object shows the Called Party Subaddress of the call.ro AtmAddress .1.3.6.1.4.1.351.140.1.2.8.1.1.8 |
cwspCallOtherIntfIndexThis object shows the Other Interface of the call. Generally, this would be the outgoing/egress interface for the call.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.9 |
cwspCallOtherIntfVpiThis object shows the VPI of the call on the partner interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.10 |
cwspCallOtherIntfVciThis object shows The VCI of the call on the partner o interface. The value should be in the range of 32-65535 (0=SPVP).ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.11 |
cwspCallOtherIntfCallRefThis object shows the Call Reference of the call on the partner interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.12 |
cwspCallTypeThis object shows the Call Type for the call on this interface. The call type could be SVC or SPVC.ro Enumeration .1.3.6.1.4.1.351.140.1.2.8.1.1.13 |
cwspCallStartTimeThis object shows the start time of the call. This is the timestamp when the Setup Message (or Add Party Message) was first received on this interface.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.8.1.1.14 |
cwspCallBearerClassThis object shows the Bearer Class of the Call. It could be BcobA, BcobC, BcobX or VP Servicero Enumeration .1.3.6.1.4.1.351.140.1.2.8.1.1.15 |
cwspCallServiceCategoryThis object shows the service category of the call, which can be CBR, rtVBR, nrtVBR, ABR or UBRro Enumeration .1.3.6.1.4.1.351.140.1.2.8.1.1.16 |
cwspCallCastTypeThis object shows the Cast Type of the call, which can be a Point-to-Point (p2p), Point-to-MultiPoint (p2mp) or MultiPoint-to-Point (mp2p) call.ro Enumeration .1.3.6.1.4.1.351.140.1.2.8.1.1.17 |
cwspCallClipSusceptibilityThis object shows Susceptibility to Clipping. It can be susceptible or not susceptible.ro Enumeration .1.3.6.1.4.1.351.140.1.2.8.1.1.18 |
cwspCallFwdConformanceThis object shows the conformance of the call to the traffic sets in the forward direction. It can be CBR.1, CBR.2, CBR.3, VBR.1 VBR.2, VBR.3, ABR, UBR.1 or UBR.2. This is as defined in ATMF Traffic Management 4.0 specification.ro Enumeration .1.3.6.1.4.1.351.140.1.2.8.1.1.19 |
cwspCallFwdPcrThis object shows the Peak Cell Rate(pcr) in the forward direction of the call.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.20 |
cwspCallFwdScrThis object shows the Sustainable Cell Rate(scr) in the forward direction of the call.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.21 |
cwspCallFwdMbsThis object shows the Maximum Burst Size(mbs) of the call in the forward direction.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.22 |
cwspCallFwdCdvtThis object shows the Cell Delay Variation Tolerance(cdvt) in the forward direction for the call, for PCR and SCR.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.23 |
cwspCallFwdFrameDiscardThis object shows if the Frame Discard is enabled or disabled in the forward direction for the callro Enumeration .1.3.6.1.4.1.351.140.1.2.8.1.1.24 |
cwspCallBwdConformanceThis object shows the conformance of the call to the traffic sets in the backward direction. It can be CBR.1, CBR.2, CBR.3, VBR.1 VBR.2, VBR.3, ABR, UBR.1 or UBR.2. This is as defined in ATMF Traffic Management 4.0 specification.ro Enumeration .1.3.6.1.4.1.351.140.1.2.8.1.1.25 |
cwspCallBwdPcrThis object shows the Peak Cell Rate in the backward direction of the call.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.26 |
cwspCallBwdScrThis object shows the Sustainable Cell Rate in the backward direction of the call.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.27 |
cwspCallBwdMbsThis object shows the Maximum Burst Size of the call in the backward direction.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.28 |
cwspCallBwdCdvtThis object shows the Cell Delay Variation Tolerance in the backward direction for the call, for PCR and SCR.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.29 |
cwspCallBwdFrameDiscardThis object shows if the Frame Discard is enabled or disabled in the backward direction for the call.ro Enumeration .1.3.6.1.4.1.351.140.1.2.8.1.1.30 |
cwspCallMaxCtdThis object shows the Maximum Cell Transfer Delay for the call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.31 |
cwspCallMaxFwdCdvThis object shows the Maximum Cell Delay Variation in the forward direction for this call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.32 |
cwspCallMaxFwdClrThis object shows the Maximum Cell Loss Ratio in the forward direction for this call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.33 |
cwspCallMaxBwdCdvThis object shows the Maximum Cell Delay Variation in the backward direction for this call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.34 |
cwspCallMaxBwdClrThis object shows the Maximum Cell Loss Ratio in the backward direction for this call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.8.1.1.35 |
cwspAbrCall OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.9 |
cwspAbrCallTableThis table contains information for ABR calls on an interface. SEQUENCE OF CwspAbrCallEntry .1.3.6.1.4.1.351.140.1.2.9.1 |
cwspAbrCallEntryAn entry in the table, containing information about an ABR call. CwspAbrCallEntry .1.3.6.1.4.1.351.140.1.2.9.1.1 |
cwspAbrCallVpiThe VPI value of the ABR call on this interface. Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.1 |
cwspAbrCallVciThe VCI value of the ABR call on this interface. The value should be in the range of 32-65535 (0=SPVP). Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.2 |
cwspAbrCallCallRefThe Call Reference value of the ABR call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.3 |
cwspAbrCallClgAddressThe Calling Party Address of the ABR call.ro AtmAddress .1.3.6.1.4.1.351.140.1.2.9.1.1.4 |
cwspAbrCallCldAddressThe Called Party Address of the ABR call.ro AtmAddress .1.3.6.1.4.1.351.140.1.2.9.1.1.5 |
cwspAbrCallClgSubAddrThe Calling Party Subaddress of the ABR call.ro AtmAddress .1.3.6.1.4.1.351.140.1.2.9.1.1.6 |
cwspAbrCallCldSubAddrThe Called Party Subaddress of the ABR call.ro AtmAddress .1.3.6.1.4.1.351.140.1.2.9.1.1.7 |
cwspAbrCallOtherIntfIndexThe Other Interface ID of the ABR call. Generally this would be the outgoing/egress interface for the call.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.8 |
cwspAbrCallOtherIntfVpiThe VPI value of the ABR call on the partner interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.9 |
cwspAbrCallOtherIntfVciThe VCI value of the ABR call on the partner interface. The value should be in the range of 32-65535 (0=SPVP).ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.10 |
cwspAbrCallOtherIntfCallRefThe Call Reference of the ABR call on the partner interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.11 |
cwspAbrCallTypeThe Call Type for the ABR call on this interface. The call type could be SVC or SPVC.ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.12 |
cwspAbrCallStartTimeThe start time of the ABR call. This is the timestamp when the Setup Message (or Add Party Message) was first received on this interface.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.9.1.1.13 |
cwspAbrCallBearerClassThe Bearer Class of the ABR call. It could be BCOB-A, BCOB-C, BCOB-X or VP Service.ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.14 |
cwspAbrCallServiceCategoryThe Service Category of the ABR call, which is ABR.ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.15 |
cwspAbrCallCastTypeThe Cast Type of the ABR call, which can only be Point-to-Point(p2p) call.ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.16 |
cwspAbrCallClipSusceptibilitySusceptibility to Clipping. It can be susceptible or not susceptible.ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.17 |
cwspAbrCallFwdConformanceThe Conformance of the ABR call to the traffic sets in the forward direction. It can only be ABR as defined in ATMF Traffic Management 4.0 specification.ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.18 |
cwspAbrCallFwdPcrThe Peak Cell Rate for the ABR call in the forward direction.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.19 |
cwspAbrCallFwdMcrThe Minimum Cell Rate for the ABR call in the forward direction.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.20 |
cwspAbrCallFwdIcrThe Initial Cell Rate for the ABR call in the forward direction. This is the rate at which the source starts, both initially and after an idle period. The value must not be larger than PCR, and is usually lower.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.21 |
cwspAbrCallFwdRifThe Rate Increase Factor for the ABR call in the forward direction. This controls the rate at which the rate increases, when a backward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate increase. The default value is rifOneOver16(12).ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.22 |
cwspAbrCallFwdRdfThe Rate Decrease Factor for the ABR call in the forward direction. This controls the rate decrease which occurs when backward RM-cells with CI=1, are received. Larger values lead to faster rate decrease. The default value is rdfOneOver16(12).ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.23 |
cwspAbrCallFwdTbeThe Transient Buffer Exposure for the ABR call in the forward direction. This is the negotiated number of cells that the network would like to limit the source to sending during setup periods, before the first RM-cell returns.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.24 |
cwspAbrCallFwdNrmThe Maximum Number of Cells a source may send for each forward RM-cell in the forward direction for the ABR call. The default value is nrm32(5).ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.25 |
cwspAbrCallFwdTrmThe Upper Bound on the time between forward RM-cells in the forward direction for the ABR call.ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.26 |
cwspAbrCallFwdAdtfThe Allowed Cell Rate (ACR) Decrease Time Factor for the ABR call in the forward direction. This is the time permitted between sending RM-cells before the rate is decreased to ICR. Range is 10 ms to 10.23 seconds. The unit is 10 msecs. For example, the default value of 50 corresponds to a time factor of 500 ms. Larger values allow a source to retain its current rate longer, during periods of relative inactivity. The default is 50 (0.5 seconds).ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.27 |
cwspAbrCallFwdCdfThe Cutoff Decrease Factor for the ABR call in the forward direction. This controls the decrease in Allowed Cell Rate (ACR) associated with missing RM-cell count (CRM). Larger values result in faster rate decrease. The default value is cdfOneOver16(4).ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.28 |
cwspAbrCallFwdFrameDiscardWhether Frame Discard is enabled or disabled in the forward direction for the ABR call.ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.29 |
cwspAbrCallBwdPcrThe Peak Cell Rate for the ABR call in the backward direction.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.30 |
cwspAbrCallBwdMcrThe Minimum Cell Rate for the ABR call in the backward direction.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.31 |
cwspAbrCallBwdIcrThe Initial Cell Rate for the ABR call in the backward direction. This is the rate at which the source starts, both initially and after an idle period. The value must not be larger than PCR, and is usually lower.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.32 |
cwspAbrCallBwdRifThe Rate Increase Factor for the ABR call in the backward direction. This controls the rate at which the rate increases, when a forward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate increase. The default value is rifOneOver16(12).ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.33 |
cwspAbrCallBwdRdfThe Rate Decrease Factor for the ABR call in the backward direction. This controls the rate decrease which occurs when forward RM-cells with CI=1, are received. Larger values lead to faster rate decrease. The default value is rdfOneOver16(12).ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.34 |
cwspAbrCallBwdTbeThe Transient Buffer Exposure for the ABR call in the backward direction. This is the negotiated number of cells that the network would like to limit the source to sending during setup periods, before the first RM-cell returns.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.35 |
cwspAbrCallBwdNrmThe Maximum Number of Cells a source may send for each forward RM-cell in the backward direction for the ABR call. The default value is nrm32(5).ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.36 |
cwspAbrCallBwdTrmThe Upper Bound on the time between forward RM-cells in the backward direction for the ABR call.ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.37 |
cwspAbrCallBwdAdtfThe Allowed Cell Rate (ACR) Decrease Time Factor for the ABR call in the backward direction. This is the time permitted between sending RM-cells before the rate is decreased to ICR. Range is 10 ms to 10.23 seconds. The unit is 10 msecs. For example, the default value of 50 corresponds to a time factor of 500 ms. Larger values allow a source to retain its current rate longer, during periods of relative inactivity. The default is 50 (0.5 seconds).ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.38 |
cwspAbrCallBwdCdfThe Cutoff Decrease Factor for the ABR call in the backward direction. This controls the decrease in Allowed Cell Rate (ACR) associated with missing RM-cell count (CRM). Larger values result in faster rate decrease. The default value is cdfOneOver16(4).ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.39 |
cwspAbrCallBwdFrameDiscardWhether Frame Discard is enabled or disabled in the backward direction for the ABR call.ro Enumeration .1.3.6.1.4.1.351.140.1.2.9.1.1.40 |
cwspAbrCallFrttThe Fixed Round-Trip Time for the ABR call. This is the sum of the fixed and propagation delays from the source to the furthest destination and back.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.41 |
cwspAbrCallMaxCtdThe Maximum Cell Transfer Delay for the ABR call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.42 |
cwspAbrCallMaxFwdCdvThe Maximum Cell Delay Variation in the forward direction for the ABR call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.43 |
cwspAbrCallMaxFwdClrThe Maximum Cell Loss Ratio in the forward direction for the ABR call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.44 |
cwspAbrCallMaxBwdCdvThe Maximum Cell Delay Variation in the backward direction for the ABR call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.45 |
cwspAbrCallMaxBwdClrThe Maximum Cell Loss Ratio in the backward direction for the ABR call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.9.1.1.46 |
cwspPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.10 |
cwspPrefixTableA table specifying the network prefix(es) used for ILMI address registration. SEQUENCE OF CwspPrefixEntry .1.3.6.1.4.1.351.140.1.2.10.1 |
cwspPrefixEntryInformation about a single network prefix contained in the prefix table. CwspPrefixEntry .1.3.6.1.4.1.351.140.1.2.10.1.1 |
cwspNetPrefixThe network prefix specified for use in ILMI address registration. NetPrefix .1.3.6.1.4.1.351.140.1.2.10.1.1.1 |
cwspPrefixRowStatusUsed to create, delete, activate and de-activate network prefixes used in ILMI address registration.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.10.1.1.2 |
cwspAddress OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.11 |
cwspAddressTableThe Interface ATM Address Table. This table contains all the attributes necessary to determine what the PNNI entity believes is reachable in terms of ATM End System Addresses and to determine which nodes are advertising this reachability. This table is also used to configure static routes to reachable addresses. Entries in this table can be created/deleted by setting the intfAddressRowStatus object to appropriate values. Existing entries in this table cannot be modified. Entries in this table can also be created/deleted through the command provided by the CLI. SEQUENCE OF CwspAddressEntry .1.3.6.1.4.1.351.140.1.2.11.1 |
cwspAddressEntryAn entry in the table, containing information about a reachable address. CwspAddressEntry .1.3.6.1.4.1.351.140.1.2.11.1.1 |
cwspAtmAddressThe value of the ATM End System Address. AtmAddress .1.3.6.1.4.1.351.140.1.2.11.1.1.1 |
cwspAddrLenThe address length in bits to be applied to the ATM End System Address. INTEGER .1.3.6.1.4.1.351.140.1.2.11.1.1.2 |
cwspAddrTypeThe type of reachability from the advertising node to the address. This variable indicates either this ATM address ('internal') is a reachable ATM destination that is directly attached to the logical node advertising this address or an ATM address('exterior') that can be reached through a PNNI routing domain but which is not located in that routing domain.rw Enumeration .1.3.6.1.4.1.351.140.1.2.11.1.1.3 |
cwspAddrProtoThe routing mechanism via which the connectivity from the advertising node to the reachable address was learned. A 'local' address indicates this address is automatically advertised. A 'static' address is not automatically advertised. By setting 'cwspAddrRedistribute' variable (see below) to 'true' will force a 'static' address to be advertised.rw Enumeration .1.3.6.1.4.1.351.140.1.2.11.1.1.4 |
cwspAddrPlanThe address plan. For NSAP address, the first byte of the address automatically implies one of the three NSAP address plans: NSAP E.164, NSAP DCC or NSAP ICD.rw Enumeration .1.3.6.1.4.1.351.140.1.2.11.1.1.5 |
cwspAddrScopeThe PNNI scope of advertisement (i.e. level of PNNI hierarchy) of the reachability from the advertising node to the address.rw INTEGER .1.3.6.1.4.1.351.140.1.2.11.1.1.6 |
cwspAddrRedistributeWhether or not the reachable address specified by this entry is to be advertised by the local node into its PNNI routing domain. This object is only meaningful if the routing mechanism (cwspAddrProto) is static.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.11.1.1.7 |
cwspAddressRowStatusTo create or delete a reachable address. Note that NMS should use CreateAndGo to create a row and Destroy to delete a row. The managed device will return active or notInService as row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.11.1.1.8 |
cwspRegAddress OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.12 |
cwspRegAddressTableThis table contains a list of ATM addresses that can be used for calls to and from a given interface by a switch or service. The ATM addresses are registered by the endsystem via ILMI. ILMI registered addresses cannot be deleted using this table. This table only applies to switches and network services. SEQUENCE OF CwspRegAddressEntry .1.3.6.1.4.1.351.140.1.2.12.1 |
cwspRegAddressEntryAn entry in the ATM Interface Registered Address table. CwspRegAddressEntry .1.3.6.1.4.1.351.140.1.2.12.1.1 |
cwspRegAtmAddressAn address registered for a given switch or service interface.ro AtmAddress .1.3.6.1.4.1.351.140.1.2.12.1.1.1 |
cwspRegAddressOrgSscopeThis object indicates the organizational scope for the referenced address. The information of the referenced address shall not be distributed outside the indicated scope. The default values for organizational scope are localNetwork(1) for ATM group addresses, and global(15) for individual addresses.rw Enumeration .1.3.6.1.4.1.351.140.1.2.12.1.1.2 |
cwspLoad OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.13 |
cwspLoadTableA table specifying the load information for each interface. SEQUENCE OF CwspLoadEntry .1.3.6.1.4.1.351.140.1.2.13.1 |
cwspLoadEntryAn entry contains the load information. CwspLoadEntry .1.3.6.1.4.1.351.140.1.2.13.1.1 |
cwspLoadBwTotalThe total bandwidth of the interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.1 |
cwspLoadMaxBwCbrThe Maximum bandwith for CBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.2 |
cwspLoadMaxBwRtVbrThe maximum bandwith for real time VBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.3 |
cwspLoadMaxBwNrtVbrThe maximum bandwith for non-real time VBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.4 |
cwspLoadMaxBwAbrThe maximum bandwith for ABR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.5 |
cwspLoadMaxBwUbrThe maximum bandwith for UBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.6 |
cwspLoadBwAvailThe total available bandwidth of the interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.7 |
cwspLoadAvlBwCbrThe available bandwith for CBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.8 |
cwspLoadAvlBwRtVbrThe available bandwith for real time VBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.9 |
cwspLoadAvlBwNrtVbrThe available bandwith for non-real time VBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.10 |
cwspLoadAvlBwAbrThe available bandwith for ABR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.11 |
cwspLoadAvlBwUbrThe available bandwith for UBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.12 |
cwspLoadVcAvailThe total number of available VCs of the interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.13 |
cwspLoadAvlVcCbrThe number of VCs used by CBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.14 |
cwspLoadAvlVcRtVbrThe number of VCs used by real time VBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.15 |
cwspLoadAvlVcNrtVbrThe number of VCs used by non-real time VBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.16 |
cwspLoadAvlVcAbrThe number of VCs used by ABR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.17 |
cwspLoadAvlVcUbrThe number of VCs used by UBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.18 |
cwspLoadCtdCbrThe cell transfer delay of CBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.19 |
cwspLoadCtdRtVbrThe cell transfer delay of real time VBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.20 |
cwspLoadCtdNrtVbrThe cell transfer delay of non-real time VBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.21 |
cwspLoadCtdAbrThe cell transfer delay of ABR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.22 |
cwspLoadCtdUbrThe cell transfer delay of UBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.23 |
cwspLoadCdvCbrThe cell delay variation of CBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.24 |
cwspLoadCdvRtVbrThe cell delay variation of real time VBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.25 |
cwspLoadCdvNrtVbrThe cell delay variation of non-real time VBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.26 |
cwspLoadCdvAbrThe cell delay variation of ABR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.27 |
cwspLoadCdvUbrThe cell delay variation of UBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.28 |
cwspLoadClr0CbrThe cell loss ratio-0 of CBR service, -1 implies N/A.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.29 |
cwspLoadClr0RtVbrThe cell loss ratio-0 of real time VBR service, -1 implies N/A.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.30 |
cwspLoadClr0NrtVbrThe cell loss ratio-0 of non-real time VBR service, -1 implies N/A.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.31 |
cwspLoadClr0AbrThe cell loss ratio-0 of ABR service, -1 implies N/A.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.32 |
cwspLoadClr0UbrThe cell loss ratio-0 of UBR service, -1 implies N/A.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.33 |
cwspLoadClr01CbrThe cell loss ratio-1 of CBR service, -1 implies N/A.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.34 |
cwspLoadClr01RtVbrThe cell loss ratio-1 of real time VBR service, -1 implies N/A.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.35 |
cwspLoadClr01NrtVbrThe cell loss ratio-1 of non-real time VBR service, -1 implies N/A.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.36 |
cwspLoadClr01AbrThe cell loss ratio-1 of ABR service, -1 implies N/A.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.37 |
cwspLoadClr01UbrThe cell loss ratio-1 of UBR service, -1 implies N/A.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.38 |
cwspLoadMinGurCrCbrThe minimum guaranteed cell rate capacity of CBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.39 |
cwspLoadMinGurCrRtVbrThe minimum guaranteed cell rate capacity of real time VBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.40 |
cwspLoadMinGurCrNrtVbrThe minimum guaranteed cell rate capacity of non-real time VBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.41 |
cwspLoadMinGurCrAbrThe minimum guaranteed cell rate capacity of ABR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.42 |
cwspLoadMinGurCrUbrThe minimum guaranteed cell rate capacity of UBR service.ro Integer32 .1.3.6.1.4.1.351.140.1.2.13.1.1.43 |
cwspConnTrace OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.14 |
cwspConnTraceAvailThis object tells the number of calls can be traced concurrently. Depending on the system resource, this object may vary sometime to time. NMS should query this object to ensure there is system resource available before creating a row in the cwspConnTraceCntlTable.ro Integer32 .1.3.6.1.4.1.351.140.1.2.14.1 |
cwspConnTraceNextIndexWhen creating a row in the cwspConnTraceCntlTable, NMS should query this object to obtain the index value to be used for row creation.ro Integer32 .1.3.6.1.4.1.351.140.1.2.14.2 |
cwspConnTraceCntlTableThis Table contains the objects which control the creation of connection trace for the existing SVC call. SEQUENCE OF CwspConnTraceCntlEntry .1.3.6.1.4.1.351.140.1.2.14.3 |
cwspConnTraceCntlEntryThis object controls the connection trace creation. NMS needs to acquire the next index available to create a row. In addition, NMS needs to provide all read-create objects in the same pdu with RowStatus to be CreateAndGo. CwspConnTraceCntlEntry .1.3.6.1.4.1.351.140.1.2.14.3.1 |
cwspConnTraceIndexIndex to a row of connection trace. Integer32 .1.3.6.1.4.1.351.140.1.2.14.3.1.1 |
cwspConnTraceifIndexThe 'ifIndex' indicates the port to a trace connection.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.351.140.1.2.14.3.1.2 |
cwspConnTraceSrcVpiThis object shows the VPI value of the starting point on this interface.rw Integer32 .1.3.6.1.4.1.351.140.1.2.14.3.1.3 |
cwspConnTraceSrcVciThis object shows The VCI value of the starting point on this interface. The value should be in the range of 32-65535 (0=SPVP).rw Integer32 .1.3.6.1.4.1.351.140.1.2.14.3.1.4 |
cwspConnTraceTypeSetting this object to either p2p or p2mp to specify tracing a p2p or p2mp connection.rw Enumeration .1.3.6.1.4.1.351.140.1.2.14.3.1.5 |
cwspConnTraceCallRefThis object shows the Call Reference value of the call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.14.3.1.6 |
cwspConnTraceLeafRefThis object shows the value of the Leaf Reference (EndPointReference) of the Call on this interface, this value is used to support p2mp call trace. For p2p call, this value should be set as 0 by NMS.rw Integer32 .1.3.6.1.4.1.351.140.1.2.14.3.1.7 |
cwspConnTraceDestVpiThis object shows the endpoint VPI value of the call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.14.3.1.8 |
cwspConnTraceDestVciThis object shows the endpoint VCI value of the call on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.14.3.1.9 |
cwspConnTraceDestCallRefThis object shows the endpoint call reference on this interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.14.3.1.10 |
cwspConnTraceResultStatusThis object shows the result of tracing the call. NMS should get positive result (i.e. traceCompleted) for this attribute before query the cwspConnTraceTable.ro Enumeration .1.3.6.1.4.1.351.140.1.2.14.3.1.11 |
cwspConnTraceQueryStatusThis object used to manage rows in this table. However, only CreateAndGo, NotInService, Active, and Destroy are start up the trace. To remove a row, NMS set this value to Destroy. The managed device will either return Active or NotInService.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.14.3.1.12 |
cwspConnTraceTableThis table contains the objects which show the traversed node information in the existing SVC call. SEQUENCE OF CwspConnTraceEntry .1.3.6.1.4.1.351.140.1.2.14.4 |
cwspConnTraceEntryA conceptual row of the cwspConnTraceTable used to return information about all the nodes belongs to the connection which search criteria is corresponding to instance of the cwspConnTraceCntlTable. CwspConnTraceEntry .1.3.6.1.4.1.351.140.1.2.14.4.1 |
cwspConnTraceDataIndexAlong with cwspConnTraceIndex, this object specified an unique entry in the cwspConnTraceTable. Integer32 .1.3.6.1.4.1.351.140.1.2.14.4.1.1 |
cwspConnTraceNodeIdThis octet string represents 22 bytes nodeId in the traced connection.ro PnniNodeId (PNNI-MIB) .1.3.6.1.4.1.351.140.1.2.14.4.1.2 |
cwspConnTraceEgressPortIdThis object represents 4 bytes logical port ID of the traversed node. When 0 is specified, the destination node for the trace is reached.ro PnniPortId (PNNI-MIB) .1.3.6.1.4.1.351.140.1.2.14.4.1.3 |
cwspConnTraceEgressVpiThis object shows the Egress port's VPI value for the traced connection.ro Integer32 .1.3.6.1.4.1.351.140.1.2.14.4.1.4 |
cwspConnTraceEgressVciThis object shows the Egress port's VCI value for the traced connectionro Integer32 .1.3.6.1.4.1.351.140.1.2.14.4.1.5 |
cwspConnTraceEgressCallRefThis object shows the Egress port's call reference.ro Integer32 .1.3.6.1.4.1.351.140.1.2.14.4.1.6 |
cwspConnTraceEgressPhyPortIdThis object shows the Egress port's physical port Identifier for the traversed node; if this object is 0 meaning that the destination node for the traced connection has been reached. the meaning for the bytes are: first byte -- flag (used by CLI to decode the rest of bytes ) 2nd byte -- shelf 3rd & 4th bytes -- slot 5th byte -- subslot 6th & 7th bytes -- port 8th byte -- subportro OCTET STRING .1.3.6.1.4.1.351.140.1.2.14.4.1.7 |
cwspConnTraceLastNodeThis value indicates if this entry contains the information about the last node where this trace ends. If it is the last node, this value is 'true(1)' or it is 'false(2)'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.14.4.1.8 |
cwspOperation OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.2.15 |
cwspOperationTableThe Interface operation table contains the runtime negotiated values between platform, PNNI controller and peer on an interface SEQUENCE OF CwspOperationEntry .1.3.6.1.4.1.351.140.1.2.15.1 |
cwspOperationEntryAn entry in the interface operation table containing negotiated values of an interface CwspOperationEntry .1.3.6.1.4.1.351.140.1.2.15.1.1 |
cwspOperIlmiEnableThe operational state of ILMI.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.351.140.1.2.15.1.1.1 |
cwspOperIfcTypeThe interface type of an interface publicUni -- Public User-Network Interface privateUni -- Private User-Network Interface iisp -- Interim Inter-Switch Signaling Protocol pnni -- Private Network-Network Interface aini -- ATM Inter-Network Interface enni -- Enhanced Network-Network Interface, a cisco proprietary interfac type.ro Enumeration .1.3.6.1.4.1.351.140.1.2.15.1.1.2 |
cwspOperIfcSideThe IME type of the ATM device which is concluded from automatic interface type determination procedure.ro Enumeration .1.3.6.1.4.1.351.140.1.2.15.1.1.3 |
cwspOperMaxVPCsThe maximum number of switched and permanent VPCs supported on this ATM interfacero Integer32 .1.3.6.1.4.1.351.140.1.2.15.1.1.4 |
cwspOperMaxVCCsThe maximum number of switched and permanent VCCs supported on this ATM interfacero Integer32 .1.3.6.1.4.1.351.140.1.2.15.1.1.5 |
cwspOperMaxVpiBitsThe maximum number of active VPI bits on this ATM interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.15.1.1.6 |
cwspOperMaxVciBitsThe maximum number of active VCI bits on this ATM interface.ro Integer32 .1.3.6.1.4.1.351.140.1.2.15.1.1.7 |
cwspOperUniTypeThe type of the ATM device, either public or private.ro Enumeration .1.3.6.1.4.1.351.140.1.2.15.1.1.8 |
cwspOperUniVersionAn indication of the latest version of the ATM Forum UNI Signaling Specification that is supported on this ATM Interface. If this value is not present, a version of the UNI earlier than 3.1 is supported. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed.ro Enumeration .1.3.6.1.4.1.351.140.1.2.15.1.1.9 |
cwspOperDeviceTypeThis object determines the type of the ATM device. This object is used in automatic ATM Interface-Type determination procedure such that a correct operational ATM Interface-type can be determined. An ATM End System shall take the value of user(1), and an ATM network node shall take the value of node(2).ro Enumeration .1.3.6.1.4.1.351.140.1.2.15.1.1.10 |
cwspOperIlmiVersionAn indication of the latest version of the ATM Forum ILMI Specification that is supported on this ATM Interface. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed. If this object is not present, a version of the ILMI earlier than 4.0 is supported.ro Enumeration .1.3.6.1.4.1.351.140.1.2.15.1.1.11 |
cwspOperNniSigVersionAn indication of the latest version of the ATM Forum PNNI Signaling Specification that is supported on this ATM Interface. Note that the PNNI routing version is not determined through ILMI. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed. Note that 'enni' is not a signaling protocol.ro Enumeration .1.3.6.1.4.1.351.140.1.2.15.1.1.12 |
cwspOperMaxSvpcVpiThe maximum switched VPC VPI.ro Integer32 .1.3.6.1.4.1.351.140.1.2.15.1.1.13 |
cwspOperMinSvpcVpiThe minimum switched VPC VPI.ro Integer32 .1.3.6.1.4.1.351.140.1.2.15.1.1.14 |
cwspOperMaxSvccVpiThe maximum switched VCC VPI.ro Integer32 .1.3.6.1.4.1.351.140.1.2.15.1.1.15 |
cwspOperMinSvccVpiThe minimum switched VCC VPI.ro Integer32 .1.3.6.1.4.1.351.140.1.2.15.1.1.16 |
cwspOperMaxSvccVciThe maximum switched VCC VCI.ro Integer32 .1.3.6.1.4.1.351.140.1.2.15.1.1.17 |
cwspOperMinSvccVciThe minimum switched VCC VCI.ro Integer32 .1.3.6.1.4.1.351.140.1.2.15.1.1.18 |
cwspOperAddrPlanSupportedThe ATM address plan supported on a public UNI. For all other interfaces, the value is aesa.ro Enumeration .1.3.6.1.4.1.351.140.1.2.15.1.1.19 |
cwspOperFailReasonDefined SVC port failures. Note: this object is used as trap varbind only. The NMS applications should not issue SNMP get, get-next for this object.ro Enumeration .1.3.6.1.4.1.351.140.1.2.15.2 |
ciscoWANPnniRouting OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.3 |
ciscoWANPnniLinkStatusIndicates the status of a link has changed: 1 - the link entered the 2-Way Inside state, 2 - the link exit the 2-Way Inside state, 3 - the link entered the 2-Way Outside state, 4 - the link exit the 2-Way Outside state. 5 - the link entered the Common Outside state, or 6 - the link exit the Common Outside state and entered the 1-Way Outside state.ro Enumeration .1.3.6.1.4.1.351.140.1.3.1 |
ciscoWANPnniPglStatusIndicates the status of PGL process has changed: 1 - the PGL exit the hung-election state, or 2 - the PGL entered the hung-election state.ro Enumeration .1.3.6.1.4.1.351.140.1.3.2 |
ciscoWANPnniReachabilityThis object is used in conjunction with ciscoWANPnniRemoteNodeId to indicate the reachability of the RemoteNode has changed: 1 - RemoteNode became reachable, or 2 - RemoteNode became unreachable.ro Enumeration .1.3.6.1.4.1.351.140.1.3.3 |
ciscoWANPnniRemoteNodeIdIndicates the node identifier of a remote node. If the remote node ID is unknown, this attribute is set to all zeros.ro PnniNodeId (PNNI-MIB) .1.3.6.1.4.1.351.140.1.3.4 |
ciscoWANPnniPortIdThe port identifier of the port.ro PnniPortId (PNNI-MIB) .1.3.6.1.4.1.351.140.1.3.5 |
ciscoWANSpvc OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.1.4 |
ciscoWANSpvcFailReasonDefines SPVC manager failures. Refer description in the textual convention. Note: this object is for Supporting Varbinds used only in trap definitions. The NMS applications should not depend on the implementation of this object. The SNMP Requests(GET,GET-NEXT) is not valid for this object.ro CwspSpvcState .1.3.6.1.4.1.351.140.1.4.1 |
cwspSpvcNodePrefixSpvc node prefix for the pnni controller. This node prefix identifies an SPVC node in the network.rw OCTET STRING .1.3.6.1.4.1.351.140.1.4.2 |
ciscoWANSvcMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.3 |
ciscoWANSvcMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.3.1 |
ciscoWANSvcMIBComplianceThe compliance statement for entities that support the Cisco SVC MIB.deprecated Unknown .1.3.6.1.4.1.351.140.3.1.1 |
ciscoWANSvcMIBCompliance2The compliance statement for entities that support the Cisco SVC MIB.deprecated Unknown .1.3.6.1.4.1.351.140.3.1.2 |
ciscoWANSvcMIBCompliance3The compliance statement for entities that support the Cisco SVC MIB. Unknown .1.3.6.1.4.1.351.140.3.1.3 |
ciscoWANSvcMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.351.140.3.2 |
cwsInfoGrpA collection of objects providing device level information. Unknown .1.3.6.1.4.1.351.140.3.2.1 |
cwspConfigGrpA collection of objects providing information about the controller interface operation and associated parameters.deprecated Unknown .1.3.6.1.4.1.351.140.3.2.2 |
cwspCacConfigGrpA collection of objects providing information about CAC information of a interface. Unknown .1.3.6.1.4.1.351.140.3.2.3 |
cwspCallStatsGrpA collection of objects providing information about call statistics of a interface. Unknown .1.3.6.1.4.1.351.140.3.2.4 |
cwspSigStatsGrpA collection of objects providing information about signaling statistics. Unknown .1.3.6.1.4.1.351.140.3.2.5 |
cwspCallGrpA collection of objects providing information about the p2p or p2mp SVC/SPVC calls and associated parameters. Unknown .1.3.6.1.4.1.351.140.3.2.6 |
cwspAbrCallGrpA collection of objects providing information about ABR calls and associated parameters of a interface. Unknown .1.3.6.1.4.1.351.140.3.2.7 |
cwspPrefixGrpA table specifying the network prefix(es) used for ILMI address registration. Unknown .1.3.6.1.4.1.351.140.3.2.8 |
cwspLoadGrpA collection of objects providing information about load information and associated parameters of a interface. Unknown .1.3.6.1.4.1.351.140.3.2.9 |
cwspAddressGrpA collection of objects providing information about ATM End System Addresses. Unknown .1.3.6.1.4.1.351.140.3.2.10 |
cwspSigConfigGrpA collection of objects providing information about signaling configuration and associated parameters. Unknown .1.3.6.1.4.1.351.140.3.2.11 |
cwspSscopConfigGrpA collection of objects providing information about SSCOP configuration and associated parameters. Unknown .1.3.6.1.4.1.351.140.3.2.12 |
cwspSscopStatsGrpA collection of objects providing information about SSCOP statistics. Unknown .1.3.6.1.4.1.351.140.3.2.13 |
cwspRegAddressGrpA collection of objects providing information about registed ATM address. Unknown .1.3.6.1.4.1.351.140.3.2.14 |
cwspRoutingGrpA collection of objects providing information about PNNI topology. Unknown .1.3.6.1.4.1.351.140.3.2.15 |
cwspConnTraceGrpA collection of objects providing trace information about SVC/PNNI connnection.deprecated Unknown .1.3.6.1.4.1.351.140.3.2.16 |
cwspOperationGrpA collection of objects providing information about runtime negotiated values between platform, PNNI controller and peer on an interface. Unknown .1.3.6.1.4.1.351.140.3.2.17 |
cwspSpvcGrpA collection of objects providing spvc related information in pnni controller. Unknown .1.3.6.1.4.1.351.140.3.2.18 |
cwspConnTraceGrp2A collection of objects providing trace information about SVC/PNNI connnection. Unknown .1.3.6.1.4.1.351.140.3.2.19 |
cwspConfigGrp2A collection of objects providing information about the controller interface operation and associated parameters.deprecated Unknown .1.3.6.1.4.1.351.140.3.2.20 |
cwspConfigGrp3A collection of objects providing information about the controller interface operation and associated parameters. Unknown .1.3.6.1.4.1.351.140.3.2.21 |