PNNI-MIB
AI MIB Summary
The PNNI-MIB facilitates the monitoring and management of Private Network-to-Network Interface (PNNI) routing topology, peer groups, and signaling states within Asynchronous Transfer Mode (ATM) networks. It provides access to critical metrics including peer adjacency status, routing database synchronization states, and call admission control parameters for ATM Forum-compliant switches.
The MIB module for managing ATM Forum PNNI routing.
Main OID:
pnniMIB.1.3.6.1.4.1.353.5.4.1
346
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
346 total| Object Name |
|---|
atmForum OBJECT IDENTIFIER .1.3.6.1.4.1.353 |
atmForumNetworkManagement OBJECT IDENTIFIER .1.3.6.1.4.1.353.5 |
atmfPnni OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.4 |
pnniMIBThe MIB module for managing ATM Forum PNNI routing. MODULE-IDENTITY .1.3.6.1.4.1.353.5.4.1 |
pnniMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.4.1.1 |
pnniBaseGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.4.1.1.1 |
pnniHighestVersionThe highest version of the PNNI protocol that the software in this switching system is capable of executing.ro PnniVersion .1.3.6.1.4.1.353.5.4.1.1.1.1 |
pnniLowestVersionThe lowest version of the PNNI Protocol that the software in this switching system is capable of executing.ro PnniVersion .1.3.6.1.4.1.353.5.4.1.1.1.2 |
pnniDtlCountOriginatorThe total number of DTL stacks that this switching system has originated as the DTLOriginator and placed into signalling messages. This includes the initial DTL stacks computed by this system as well as any alternate route (second, third choice etc.) DTL stacks computed by this switching system in response to crankbacks.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.1.3 |
pnniDtlCountBorderThe number of partial DTL stacks that this switching system has added into signalling messages as an entry border node. This includes the initial partial DTL stacks computed by this system as well as any alternate route (second, third choice etc.) partial DTL stacks computed by this switching system in response to crankbacks.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.1.4 |
pnniCrankbackCountOriginatorThe count of the total number of connection setup messages including DTL stacks originated by this switching system that have cranked back to this switching system at all levels of the hierarchy.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.1.5 |
pnniCrankbackCountBorderThe count of the total number of connection setup messages including DTLs added by this switching system as an entry border node that have cranked back to this switching system at all levels of the hierarchy. This count does not include Crankbacks for which this switching system was not the crankback destination, only those crankbacks that were directed to this switching system are counted here.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.1.6 |
pnniAltRouteCountOriginatorThe total number of alternate DTL stacks that this switching system has computed and placed into signalling messages as the DTLOriginator.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.1.7 |
pnniAltRouteCountBorderThe total number of alternate partial DTL stacks that this switching system has computed and placed into signalling messages as an entry border node.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.1.8 |
pnniRouteFailCountOriginatorThe total number of times where the switching system failed to compute a viable DTL stack as the DTLOriginator for some call. It indicates the number of times a call was cleared from this switching system due to originator routing failure.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.1.9 |
pnniRouteFailCountBorderThe total number of times where the switching system failed to compute a viable partial DTL stack as an entry border node for some call. It indicates the number of times a call was either cleared or cranked back from this switching system due to border routing failure.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.1.10 |
pnniRouteFailUnreachableOriginatorThe total number of times where the switching system failed to compute a viable DTL stack as the DTLOriginator because the destination was unreachable, i.e., those calls that are cleared with cause #2 `specified transit network unreachable' or cause #3 `destination unreachable' in the cause IE.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.1.11 |
pnniRouteFailUnreachableBorderThe total number of times where the switching system failed to compute a viable partial DTL stack as an entry border node because the target of the path calculation was unreachable, i.e., those calls that are cleared or cranked back with cause #2 `specified transit network unreachable' or cause #3 `destination unreachable' in the cause IE.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.1.12 |
pnniNodeTableThe pnniNodeTable collects attributes that affect the operation of a PNNI logical node. There is a single row in this table for each PNNI peer group that the managed system is expected or eligible to become a member of. SEQUENCE OF PnniNodeEntry .1.3.6.1.4.1.353.5.4.1.1.2 |
pnniNodeEntryAn entry in the table, containing information about a PNNI logical node in this switching system. PnniNodeEntry .1.3.6.1.4.1.353.5.4.1.1.2.1 |
pnniNodeIndexA value assigned to a node in this switching system that uniquely identifies it in the MIB. PnniNodeIndex .1.3.6.1.4.1.353.5.4.1.1.2.1.1 |
pnniNodeLevelThe level of PNNI hierarchy at which this node exists. This attribute is used to determine the default node ID and the default peer group ID for this node. This object may only be written when pnniNodeAdminStatus has the value down.rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.2.1.2 |
pnniNodeIdThe value the switching system is using to represent itself as this node. This object may only be written when pnniNodeAdminStatus has the value down. If pnniNodeLowest is true, then the default node ID takes the form defined in Section 5.3.3 for lowest level nodes, with the first octet equal to pnniNodeLevel, the second octet equal to 160, and the last 20 octets equal to pnniNodeAtmAddress. If pnniNodeLowest is false, then the default node ID takes the form defined in Section 5.3.3 for logical group nodes, with the first octet equal to pnniNodeLevel, the next fourteen octets equal to the value of pnniNodePeerGroupId for the child node whose election as PGL causes this LGN to be instantiated, the next six octets equal to the ESI of pnniNodeAtmAddress, and the last octet equal to zero.rw PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.2.1.3 |
pnniNodeLowestIndicates whether this node acts as a lowest level node or whether this node is a logical group node that becomes active when one of the other nodes in this switching system becomes a peer group leader. The value 'false' must not be used with nodes that are not PGL/LGN capable. This object may only be written when pnniNodeAdminStatus has the value down.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.2.1.4 |
pnniNodeAdminStatusIndicates whether the administrative status of the node is up (the node is allowed to become active) or down (the node is forced to be inactive). When pnniNodeAdminStatus is down, then pnniNodeOperStatus must also be down.rw Enumeration .1.3.6.1.4.1.353.5.4.1.1.2.1.5 |
pnniNodeOperStatusIndicates whether the node is active or whether the node has yet to become operational. When the value is down, all state has been cleared from the node and the node is not communicating with any of its neighbor nodes.ro Enumeration .1.3.6.1.4.1.353.5.4.1.1.2.1.6 |
pnniNodeDomainNameThe name of the PNNI routing domain in which this node participates. All lowest-level PNNI nodes with the same pnniNodeDomainName are presumed to be connected.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.2.1.7 |
pnniNodeAtmAddressThis node's ATM End System Address. Remote systems wishing to exchange PNNI protocol packets with this node should direct packets or calls to this address. This attribute may only be written when pnniNodeAdminStatus has the value down.rw PnniAtmAddr .1.3.6.1.4.1.353.5.4.1.1.2.1.8 |
pnniNodePeerGroupIdThe Peer Group Identifier of the peer group that the given node is to become a member of. The default value of this attribute has the first octet equal to pnniNodeLevel, the next pnniNodeLevel bits equal to the pnniNodeLevel bits starting from the third octet of pnniNodeId, and the remainder padded with zeros. This object may only be written when pnniNodeAdminStatus has the value down.rw PnniPeerGroupId .1.3.6.1.4.1.353.5.4.1.1.2.1.9 |
pnniNodeRestrictedTransitSpecifies whether the node is restricted to not allowing support of SVCs transiting this node. This attribute determines the setting of the restricted transit bit in the nodal information group originated by this node.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.2.1.10 |
pnniNodeComplexRepSpecifies whether this node uses the complex node representation. A value of `true' indicates that the complex node representation is used, whereas a value of `false' indicates that the simple node representation is used. This attribute determines the setting of the nodal representation bit in the nodal information group originated by this node.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.2.1.11 |
pnniNodeRestrictedBranchingIndicates whether the node is able to support additional point-to-multipoint branches. A value of 'false' indicates that additional branches can be supported, and a value of 'true' indicates that additional branches cannot be supported. This attribute reflects the setting of the restricted branching bit in the nodal information group originated by this node.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.2.1.12 |
pnniNodeDatabaseOverloadSpecifies whether the node is currently operating in topology database overload state. This attribute has the same value as the Non-transit for PGL Election bit in the nodal information group originated by this node.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.2.1.13 |
pnniNodePtsesGauges the total number of PTSEs currently in this node's topology database(s).ro Gauge32 .1.3.6.1.4.1.353.5.4.1.1.2.1.14 |
pnniNodeRowStatusTo create, delete, activate and de-activate a Node.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.2.1.15 |
pnniNodePglTablePeer group leader election information for a PNNI node in this switching system. SEQUENCE OF PnniNodePglEntry .1.3.6.1.4.1.353.5.4.1.1.3 |
pnniNodePglEntryAn entry in the table, containing PGL election information of a PNNI logical node in this switching system. PnniNodePglEntry .1.3.6.1.4.1.353.5.4.1.1.3.1 |
pnniNodePglLeadershipPriorityThe Leadership priority value this node should advertise in its nodal information group for the given peer group. Only the value zero can be used with nodes that are not PGL/LGN capable. If there is no configured parent node index or no corresponding entry in the pnniNodeTable, then the advertised leadership priority is zero regardless of this value.rw INTEGER .1.3.6.1.4.1.353.5.4.1.1.3.1.1 |
pnniNodeCfgParentNodeIndexThe local node index used to identify the node that will represent this peer group at the next higher level of hierarchy, if this node becomes peer group leader. The value 0 indicates that there is no parent node.rw PnniNodeIndex .1.3.6.1.4.1.353.5.4.1.1.3.1.2 |
pnniNodePglInitTimeThe amount of time in seconds this node will delay advertising its choice of preferred PGL after having initialized operation and reached the full state with at least one neighbor in the peer group.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.353.5.4.1.1.3.1.3 |
pnniNodePglOverrideDelayThe amount of time in seconds a node will wait for itself to be declared the preferred PGL by unanimous agreement among its peers. In the absence of unanimous agreement this will be the amount of time that will pass before this node considers a two thirds majority as sufficient agreement to declare itself peer group leader, abandoning the attempt to get unanimous agreement.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.353.5.4.1.1.3.1.4 |
pnniNodePglReelectTimeThe amount of time in seconds after losing connectivity to the current peer group leader, that this node will wait before re-starting the process of electing a new peer group leader.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.353.5.4.1.1.3.1.5 |
pnniNodePglStateIndicates the state that this node is in with respect to the Peer Group Leader election that takes place in the node's peer group. The values are enumerated in the Peer Group Leader State Machine.ro Enumeration .1.3.6.1.4.1.353.5.4.1.1.3.1.6 |
pnniNodePreferredPglThe Node ID of the node which the local node believes should be or become the peer group leader. This is also the value the local node is currently advertising in the `Preferred Peer Group Leader Node ID' field of its nodal information group within the given peer group. If a Preferred PGL has not been chosen, this attribute's value is set to (all) zero(s).ro PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.3.1.7 |
pnniNodePeerGroupLeaderThe Node Identifier of the node which is currently operating as peer group leader of the peer group this node belongs to. If a PGL has not been elected, this attribute's value is set to (all) zero(s).ro PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.3.1.8 |
pnniNodePglTimeStampThe time at which the current Peer Group Leader established itself.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.3.1.9 |
pnniNodeActiveParentNodeIdThe Node Identifier value being used by the Peer Group Leader to represent this peer group at the next higher level of the hierarchy. If this node is at the highest level of the hierarchy or if no PGL has yet been elected the PNNI Protocol Entity sets the value of this attribute to (all) zero(s).ro PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.3.1.10 |
pnniNodeTimerTableA table of initial PNNI timer values and significant change thresholds. SEQUENCE OF PnniNodeTimerEntry .1.3.6.1.4.1.353.5.4.1.1.4 |
pnniNodeTimerEntryAn entry in the table, containing initial PNNI timer values and significant change thresholds of a PNNI logical node in this switching system. PnniNodeTimerEntry .1.3.6.1.4.1.353.5.4.1.1.4.1 |
pnniNodePtseHolddownThe initial value for the PTSE hold down timer that will be used by the given node to limit the rate at which it can re-originate PTSEs. It must be a positive non-zero number.rw Integer32 UNITS "100 milliseconds" .1.3.6.1.4.1.353.5.4.1.1.4.1.1 |
pnniNodeHelloHolddownThe initial value for the Hello hold down timer that will be used by the given node to limit the rate at which it sends Hellos. It must be a positive non-zero number.rw Integer32 UNITS "100 milliseconds" .1.3.6.1.4.1.353.5.4.1.1.4.1.2 |
pnniNodeHelloIntervalThe initial value for the Hello Timer. In the absence of triggered Hellos, this node will send one Hello packet on each of its ports on this interval.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.353.5.4.1.1.4.1.3 |
pnniNodeHelloInactivityFactorThe value for the Hello Inactivity factor that this node will use to determine when a neighbor has gone down.rw Integer32 .1.3.6.1.4.1.353.5.4.1.1.4.1.4 |
pnniNodeHlinkInactThe amount of time a node will continue to advertise a horizontal (logical) link for which it has not received and processed a LGN Horizontal Link information group.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.353.5.4.1.1.4.1.5 |
pnniNodePtseRefreshIntervalThe initial value for the Refresh timer that this node will use to drive (re-)origination of PTSEs in the absence of triggered updates.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.353.5.4.1.1.4.1.6 |
pnniNodePtseLifetimeFactorThe value for the lifetime multiplier, expressed as a percentage. The result of multiplying the pnniNodePtseRefreshInterval attribute value by this attribute value is used as the initial lifetime that this node places into self-originated PTSEs.rw INTEGER .1.3.6.1.4.1.353.5.4.1.1.4.1.7 |
pnniNodeRxmtIntervalThe period between retransmissions of unacknowledged Database Summary packets, PTSE Request packets, and PTSPs.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.353.5.4.1.1.4.1.8 |
pnniNodePeerDelayedAckIntervalThe minimum amount of time between transmissions of delayed PTSE acknowledgement packets.rw Integer32 UNITS "100 milliseconds" .1.3.6.1.4.1.353.5.4.1.1.4.1.9 |
pnniNodeAvcrPmThe proportional multiplier used in the algorithms that determine significant change for AvCR parameters, expressed as a percentage.rw INTEGER .1.3.6.1.4.1.353.5.4.1.1.4.1.10 |
pnniNodeAvcrMtThe minimum threshold used in the algorithms that determine significant change for AvCR parameters, expressed as a percentage.rw INTEGER .1.3.6.1.4.1.353.5.4.1.1.4.1.11 |
pnniNodeCdvPmThe proportional multiplier used in the algorithms that determine significant change for CDV metrics, expressed as a percentage.rw INTEGER .1.3.6.1.4.1.353.5.4.1.1.4.1.12 |
pnniNodeCtdPmThe proportional multiplier used in the algorithms that determine significant change for CTD metrics, expressed as a percentage.rw INTEGER .1.3.6.1.4.1.353.5.4.1.1.4.1.13 |
pnniNodeSvccTableA table of variables related to SVCC-based routing control channels. SEQUENCE OF PnniNodeSvccEntry .1.3.6.1.4.1.353.5.4.1.1.5 |
pnniNodeSvccEntryAn entry in the table, containing SVCC-based RCC variables of a PNNI logical node in this switching system. PnniNodeSvccEntry .1.3.6.1.4.1.353.5.4.1.1.5.1 |
pnniNodeSvccInitTimeThe amount of time this node will delay initiating establishment of an SVCC to a neighbor with a numerically lower ATM address, after determining that such an SVCC should be established.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.353.5.4.1.1.5.1.1 |
pnniNodeSvccRetryTimeThe amount of time this node will delay after an apparently still necessary and viable SVCC-based RCC is unexpectedly torn down, before attempting to re-establish it.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.353.5.4.1.1.5.1.2 |
pnniNodeSvccCallingIntegrityTimeThe amount of time this node will wait for an SVCC, which it has initiated establishment of as the calling party, to become fully established before giving up and tearing it down.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.353.5.4.1.1.5.1.3 |
pnniNodeSvccCalledIntegrityTimeThe amount of time this node will wait for an SVCC, which it has decided to accept as the called party, to become fully established before giving up and tearing it down.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.353.5.4.1.1.5.1.4 |
pnniNodeSvccTrafficDescriptorIndexAn index into the atmTrafficDescrParamTable defined in RFC 1695. This traffic descriptor is used when establishing switched virtual channels for use as SVCC-based RCCs to/from PNNI logical group nodes.rw AtmTrafficDescrParamIndex (ATM-TC-MIB) .1.3.6.1.4.1.353.5.4.1.1.5.1.5 |
pnniScopeMappingTableThe pnniScopeTable contains the mappings of membership and connection scope from organizational scope values (used at UNI interfaces) to PNNI scope (i.e. in terms of PNNI routing level indicators). SEQUENCE OF PnniScopeMappingEntry .1.3.6.1.4.1.353.5.4.1.1.6 |
pnniScopeMappingEntryAn entry in the table, containing scope mapping information for a PNNI logical node in this switching system. PnniScopeMappingEntry .1.3.6.1.4.1.353.5.4.1.1.6.1 |
pnniScopeLocalNetworkThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value localNetwork(1).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.1 |
pnniScopeLocalNetworkPlusOneThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value localNetworkPlusOne(2).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.2 |
pnniScopeLocalNetworkPlusTwoThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value localNetworkPlusTwo(3).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.3 |
pnniScopeSiteMinusOneThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value siteMinusOne(4).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.4 |
pnniScopeIntraSiteThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value intraSite(5).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.5 |
pnniScopeSitePlusOneThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value sitePlusOne(6).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.6 |
pnniScopeOrganizationMinusOneThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value organizationMinusOne(7).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.7 |
pnniScopeIntraOrganizationThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value intraOrganization(8).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.8 |
pnniScopeOrganizationPlusOneThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value organizationPlusOne(9).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.9 |
pnniScopeCommunityMinusOneThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value communityMinusOne(10).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.10 |
pnniScopeIntraCommunityThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value intraCommunity(11).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.11 |
pnniScopeCommunityPlusOneThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value communityPlusOne(12).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.12 |
pnniScopeRegionalThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value regional(13).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.13 |
pnniScopeInterRegionalThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value interRegional(14).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.14 |
pnniScopeGlobalThe highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value global(15).rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.6.1.15 |
pnniSummaryTableA list of the summary address prefixes that may be advertised by the specified logical PNNI entity.deprecated SEQUENCE OF PnniSummaryEntry .1.3.6.1.4.1.353.5.4.1.1.7 |
pnniSummaryEntryAn entry in the table, containing summary address prefix information in this switching system.deprecated PnniSummaryEntry .1.3.6.1.4.1.353.5.4.1.1.7.1 |
pnniSummaryAddressThe ATM End System Address prefix for the summary.deprecated AtmAddrPrefix .1.3.6.1.4.1.353.5.4.1.1.7.1.1 |
pnniSummaryPrefixLengthThe prefix length for the summary.deprecated PnniPrefixLength .1.3.6.1.4.1.353.5.4.1.1.7.1.2 |
pnniSummaryTypeThe type (e.g. internal or exterior) of summary being described.rwdeprecated Enumeration .1.3.6.1.4.1.353.5.4.1.1.7.1.3 |
pnniSummarySuppressDetermines what is done with addresses that are being summarized by the instance. The default value (e.g. false) will indicate that the summary should propagate into the peer group. Network Management will be able to set the value of this attribute to `suppress' (e.g. true), which suppresses the summary and any reachable addresses it summarizes from being advertised into the peer group.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.7.1.4 |
pnniSummaryStateIndicates whether the summary is currently being advertised by the node within the local switching system into its peer group.rodeprecated Enumeration .1.3.6.1.4.1.353.5.4.1.1.7.1.5 |
pnniSummaryRowStatusTo create, delete, activate and de-activate a summary.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.7.1.6 |
pnniIfTableThe pnniIfTable contains the attributes necessary to configure a physical interface on a switching system which is capable of being used for PNNI routing. Interfaces may represent physical connection points (i.e. copper/fiber connection points) or VPCs which have been configured for PNNI's use. Each interface is attached to a specific lowest-level node within the switching system. An ifIndex is used as the instance ID to uniquely identify the interface on the local switching system. This index has the same value as the ifIndex object defined in RFC 1573 for the same interface, since this table correlates with the ifTable in RFC 1573. One row in this table is created by the managed system for each row in the ifTable that has an ifType of atm(37) or atmLogical(80). SEQUENCE OF PnniIfEntry .1.3.6.1.4.1.353.5.4.1.1.8 |
pnniIfEntryAn entry in the table, containing PNNI specific interface information in this switching system. PnniIfEntry .1.3.6.1.4.1.353.5.4.1.1.8.1 |
pnniIfNodeIndexIdentifies the node within the switching system that the interface is directly attached to. The value zero is not a valid value.rw PnniNodeIndex .1.3.6.1.4.1.353.5.4.1.1.8.1.1 |
pnniIfPortIdThe Port Identifier of the port as selected by the PNNI protocol entity for the given interface. This value has meaning only within the context of the node to which the port is attached. The distinguished value zero indicates that no PNNI Port Identifier has been assigned for this interface (for example, this value may be used when the interface is not running PNNI).ro PnniPortId .1.3.6.1.4.1.353.5.4.1.1.8.1.2 |
pnniIfAggrTokenThe configured aggregation token for this interface. The aggregation token controls what other links the link associated with this interface will be aggregated together with.rw PnniAggrToken .1.3.6.1.4.1.353.5.4.1.1.8.1.3 |
pnniIfVPCapabilityIndicates whether the interface is capable of having VPCs established within it or not. This object may only have the value `true' for physical ATM interfaces, i.e. those with an ifType of atm(37).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.8.1.4 |
pnniIfAdmWeightCbrThe administrative weight of this interface for the constant bit rate service category.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.8.1.5 |
pnniIfAdmWeightRtVbrThe administrative weight of this interface for the real-time variable bit rate service category.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.8.1.6 |
pnniIfAdmWeightNrtVbrThe administrative weight of this interface for the non-real-time variable bit rate service category.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.8.1.7 |
pnniIfAdmWeightAbrThe administrative weight of this interface for the available bit rate service category.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.8.1.8 |
pnniIfAdmWeightUbrThe administrative weight of this interface for the unspecified bit rate service category.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.8.1.9 |
pnniIfRccServiceCategoryThe service category used for the PNNI routing control channel (VCI=18) on this interface.rw ServiceCategory .1.3.6.1.4.1.353.5.4.1.1.8.1.10 |
pnniIfRccTrafficDescrIndexThe traffic descriptor index referring to the entry in the atmTrafficDescrParamTable defined in RFC 1695 that specifies the traffic allocation for the PNNI routing control channel (VCI=18) on this interface.rw AtmTrafficDescrParamIndex (ATM-TC-MIB) .1.3.6.1.4.1.353.5.4.1.1.8.1.11 |
pnniLinkTableThis table contains the attributes necessary to describe the operation of logical links attached to the local switching system and the relationship with the neighbor nodes on the other end of the links. Links are attached to a specific node within the switching system. A concatenation of the Node Index of the node within the local switching system and the port ID are used as the instance ID to uniquely identify the link. Links may represent horizontal links between lowest level neighboring peers, outside links, uplinks, or horizontal links to/from LGNs. The entire pnniLink object is read-only, reflecting the fact that this information is discovered dynamically by the PNNI protocol rather than configured. SEQUENCE OF PnniLinkEntry .1.3.6.1.4.1.353.5.4.1.1.9 |
pnniLinkEntryAn entry in the table, containing information about a link attached to a PNNI logical node in this switching system. PnniLinkEntry .1.3.6.1.4.1.353.5.4.1.1.9.1 |
pnniLinkPortIdThe Port Identifier of the link as selected by the local node. This value has meaning only within the context of the node to which the port is attached. PnniPortId .1.3.6.1.4.1.353.5.4.1.1.9.1.1 |
pnniLinkTypeIndicates the type of link being described.ro Enumeration .1.3.6.1.4.1.353.5.4.1.1.9.1.2 |
pnniLinkVersionFor horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute indicates the version of PNNI routing protocol used to exchange information over this link. If communication with the neighbor node has not yet been established, then the Version is set to `unknown'. For uplinks (where the port ID is not also used for the underlying outside link) or links to/from LGNs, the Version is set to `unknown'.ro PnniVersion .1.3.6.1.4.1.353.5.4.1.1.9.1.3 |
pnniLinkHelloStateFor horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute indicates the state of the Hello protocol exchange over this link. For links to/from LGNs, this attribute indicates the state of the corresponding LGN Horizontal Link Hello State Machine. For uplinks (where the port ID is not also used for the underlying outside link), this attribute is set to notApplicable.ro PnniHelloState .1.3.6.1.4.1.353.5.4.1.1.9.1.4 |
pnniLinkRemoteNodeIdIndicates the node identifier of the remote (neighboring) node on the other end of the link. If the pnniLinkType is `outside link and uplink', this is the node identifier of the lowest-level neighbor node on the other end of the outside link. If the remote node ID is unknown or if the pnniLinkType is `uplink', this attribute is set to all zeros.ro PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.9.1.5 |
pnniLinkRemotePortIdIndicates the port identifier of the port at the remote end of the link as assigned by the remote node. If the pnniLinkType is `outside link and uplink', this is the port identifier assigned by the lowest-level neighbor node to identify the outside link. If the remote port ID is unknown or if the pnniLinkType is `uplink', this attribute is set to zero.ro PnniPortId .1.3.6.1.4.1.353.5.4.1.1.9.1.6 |
pnniLinkDerivedAggrTokenIndicates the derived aggregation token value used on this link. For horizontal links between lowest-level nodes and when the link type is not yet known, this attribute takes the value of zero.ro PnniAggrToken .1.3.6.1.4.1.353.5.4.1.1.9.1.7 |
pnniLinkUpnodeIdFor outside links and uplinks, this attribute contains the Node Identifier of the upnode (the neighbor node's identity at the level of the common peer group). When the upnode has not yet been identified, this attribute is set to zero. For horizontal links or when the link type is not yet known, this attribute is set to zero.ro PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.9.1.8 |
pnniLinkUpnodeAtmAddressFor outside links and uplinks, this attribute contains the ATM End System Address used to establish connections to the upnode. When the upnode has not yet been identified, this attribute is set to zero. For horizontal links or when the link type is not yet known, this attribute is set to zero.ro PnniAtmAddr .1.3.6.1.4.1.353.5.4.1.1.9.1.9 |
pnniLinkCommonPeerGroupIdFor outside links and uplinks, this attribute contains the peer group identifier of the lowest level common Peer Group in the ancestry of the neighboring node and the node within the local switching system. The value of this attribute takes on a value determined by the Hello exchange of hierarchical information that occurs between the two lowest-level border nodes. When the common peer group has not yet been identified, this attribute is set to zero. For horizontal links or when the link type is not yet known, this attribute is set to all zeros.ro PnniPeerGroupId .1.3.6.1.4.1.353.5.4.1.1.9.1.10 |
pnniLinkIfIndexFor horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute identifies the interface to which the logical link corresponds. For all other cases, the value of this object is zero.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.353.5.4.1.1.9.1.11 |
pnniLinkSvccRccIndexFor horizontal links to/from LGNs, this attribute identifies the SVCC-based RCC used to exchange information with the neighboring peer logical group node. If the pnniLinkType is not `horizontal link to/from LGN', this attribute shall take the value of zero.ro PnniSvccRccIndex .1.3.6.1.4.1.353.5.4.1.1.9.1.12 |
pnniLinkRcvHellosFor horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute contains a count of the number of Hello Packets received over this link. If the pnniLinkType is `horizontal link to/from LGN' or `uplink', this attribute is set to zero.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.9.1.13 |
pnniLinkXmtHellosFor horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute contains a count of the number of Hello Packets transmitted over this link. If the pnniLinkType is `horizontal link to/from LGN' or `uplink', this attribute is set to zero.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.9.1.14 |
pnniNbrPeerTableThe pnniNbrPeer Object contains all the attributes necessary to describe the relationship a node in this switching system has with a neighboring node within the same peer group. A concatenation of the Node Identifier of the node within the local switching system and the neighboring peer's Node Identifier is used to form the instance ID for this object. The entire pnniNbrPeer object is read-only, reflecting the fact that neighboring peers are discovered dynamically by the PNNI protocol rather than configured. SEQUENCE OF PnniNbrPeerEntry .1.3.6.1.4.1.353.5.4.1.1.10 |
pnniNbrPeerEntryAn entry in the table, containing information about this node's relationship with a neighboring peer node. PnniNbrPeerEntry .1.3.6.1.4.1.353.5.4.1.1.10.1 |
pnniNbrPeerRemoteNodeIdThe Node Identifier of the neighboring peer node. PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.10.1.1 |
pnniNbrPeerStateIndicates the state of this node's Neighboring Peer State Machine associated with pnniNbrPeerRemoteNodeId.ro Enumeration .1.3.6.1.4.1.353.5.4.1.1.10.1.2 |
pnniNbrPeerSvccRccIndexIdentifies the SVCC-based RCC being used to communicate with the neighboring peer if one exists. If both the local node and the neighboring peer node are lowest-level nodes, this attribute is set to zero.ro PnniSvccRccIndex .1.3.6.1.4.1.353.5.4.1.1.10.1.3 |
pnniNbrPeerPortCountA count of the total number of ports that connect to the neighboring peer. If the neighboring peer only communicates via an SVCC-based RCC, the value of this attribute is set to zero. Otherwise it is set to the total number of ports to the neighboring peer in the Hello state 2-WayInside.ro Gauge32 .1.3.6.1.4.1.353.5.4.1.1.10.1.4 |
pnniNbrPeerRcvDbSumsA count of the number of Database Summary Packets received from the neighboring peer.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.10.1.5 |
pnniNbrPeerXmtDbSumsA count of the number of Database Summary Packets transmitted to the neighboring peer.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.10.1.6 |
pnniNbrPeerRcvPtspsA count of the number of PTSPs received from the neighboring peer.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.10.1.7 |
pnniNbrPeerXmtPtspsA count of the number of PTSPs (re)transmitted to the neighboring peer.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.10.1.8 |
pnniNbrPeerRcvPtseReqsA count of the number of PTSE Request packets received from the neighboring peer.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.10.1.9 |
pnniNbrPeerXmtPtseReqsA count of the number of PTSE Request packets transmitted to the neighboring peer.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.10.1.10 |
pnniNbrPeerRcvPtseAcksA count of the number of PTSE Ack packets received from the neighboring peer.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.10.1.11 |
pnniNbrPeerXmtPtseAcksA count of the number of PTSE Ack packets transmitted to the neighboring peer.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.10.1.12 |
pnniNbrPeerPortTableA table of all ports in Hello state 2-Way Inside to a given neighboring peer node. A concatenation of the Node Index of the node within the local switching system, the neighbor's Node Identifier and the Interface Index of the port being described forms the instance ID for this object. This object is only used for lowest-level nodes. SEQUENCE OF PnniNbrPeerPortEntry .1.3.6.1.4.1.353.5.4.1.1.11 |
pnniNbrPeerPortEntryAn entry in the table, containing information about a port in the Hello state 2-Way Inside from a PNNI logical node in this switching system to a neighboring peer node. PnniNbrPeerPortEntry .1.3.6.1.4.1.353.5.4.1.1.11.1 |
pnniNbrPeerPortIdThe port ID of a port to the neighboring peer that is in the Hello state 2-Way Inside. PnniPortId .1.3.6.1.4.1.353.5.4.1.1.11.1.1 |
pnniNbrPeerPortFloodStatusIndicates whether the port is being used for transmission of flooding and database synchronization information to the neighboring peer.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.11.1.2 |
pnniSvccRccTableA table containing the attributes necessary to analyze the operation of the PNNI protocol on SVCC-based Routing Control Channels. This entire object is read-only, reflecting the fact that SVCC-based RCCs are established dynamically during operation of the PNNI protocol rather than configured. SEQUENCE OF PnniSvccRccEntry .1.3.6.1.4.1.353.5.4.1.1.12 |
pnniSvccRccEntryAn entry in the table, containing information about an SVCC-based RCC from a PNNI logical node in this switching system. PnniSvccRccEntry .1.3.6.1.4.1.353.5.4.1.1.12.1 |
pnniSvccRccIndexAn index into the node's tables of SVCC-based RCCs. PnniSvccRccIndex .1.3.6.1.4.1.353.5.4.1.1.12.1.1 |
pnniSvccRccVersionThe version of the PNNI routing protocol used to exchange information with the neighbor node.ro PnniVersion .1.3.6.1.4.1.353.5.4.1.1.12.1.2 |
pnniSvccRccHelloStateThe state of the Hello protocol exchange over the SVCC-based RCC. Note: the Down state indicates that the SVCC establishment is in progress.ro PnniHelloState .1.3.6.1.4.1.353.5.4.1.1.12.1.3 |
pnniSvccRccRemoteNodeIdThe remote node at which the SVCC-based RCC terminates.ro PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.12.1.4 |
pnniSvccRccRemoteAtmAddressThe ATM End System Address to which SVCC establishment is attempted.ro PnniAtmAddr .1.3.6.1.4.1.353.5.4.1.1.12.1.5 |
pnniSvccRccRcvHellosA count of the number of Hello Packets received over this SVCC-based RCC.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.12.1.6 |
pnniSvccRccXmtHellosA count of the number of Hello Packets transmitted over this SVCC-based RCC.ro Counter32 .1.3.6.1.4.1.353.5.4.1.1.12.1.7 |
pnniSvccRccIfIndexThe interface from which the SVCC-based RCC leaves the switching system. If the SVCC-based RCC has not yet been established, then this attribute takes the value of zero.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.353.5.4.1.1.12.1.8 |
pnniSvccRccVpiThe VPI used at the interface from which the SVCC-based RCC leaves the switching system. If the SVCC-based RCC has not yet been established, then this attribute takes the value of zeroro INTEGER .1.3.6.1.4.1.353.5.4.1.1.12.1.9 |
pnniSvccRccVciThe VCI used at the interface from which the SVCC-based RCC leaves the switching system. If the SVCC-based RCC has not yet been established, then this attribute takes the value of zeroro INTEGER .1.3.6.1.4.1.353.5.4.1.1.12.1.10 |
pnniPtseTableThe pnniPtse object contains the attributes that describe the most recent instances of PTSEs in a node's topology database. A concatenation of the Node Identifier of the local node that received the PTSE, the originating Node's Node Identifier and the PTSE Identifier are used to form the instance ID for an instance of this object. SEQUENCE OF PnniPtseEntry .1.3.6.1.4.1.353.5.4.1.1.13 |
pnniPtseEntryAn entry in the table, containing information about a PTSE in the topology database of a PNNI logical node in this switching system. PnniPtseEntry .1.3.6.1.4.1.353.5.4.1.1.13.1 |
pnniPtseOriginatingNodeIdThe Node Identifier of the node that originated the PTSE. PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.13.1.1 |
pnniPtseIdThe value of the PTSE Identifier assigned to the PTSE by its originator. Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.13.1.2 |
pnniPtseTypeThe type of information contained in the PTSE.ro Enumeration .1.3.6.1.4.1.353.5.4.1.1.13.1.3 |
pnniPtseSequenceNumThe sequence number of the instance of the PTSE as it appears in the local topology database.ro Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.13.1.4 |
pnniPtseChecksumThe value of the PTSE checksum as it appears in the local topology database.ro Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.13.1.5 |
pnniPtseLifeTimeThe value of the remaining lifetime for the given PTSE as it appears in the local topology database.ro Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.13.1.6 |
pnniPtseInfoAn unformatted hexadecimal dump of the PTSE contents in full. Note: If the size of the PTSE contents is larger than the maximum size of SNMP packets then this is truncated.ro OCTET STRING .1.3.6.1.4.1.353.5.4.1.1.13.1.7 |
pnniMapTableA table containing attributes necessary to find and analyze the operation of all links and nodes within the PNNI hierarchy, as seen from the perspective of a local node. An instance of a pnniMap Object describes a link in terms of a node at one end of the link. Normally there will be two instances of the pnniMap object in the MIB for each horizontal link. The two instances provide information for Network management to map port identifiers from the nodes at both ends to the link between them. A concatenation of the Local Node Index, Originating Node Identifier and Originating Port Identifier are used to form the instance ID for this object. This entire object is read-only, reflecting the fact that the map is discovered dynamically during operation of the PNNI protocol rather than configured. SEQUENCE OF PnniMapEntry .1.3.6.1.4.1.353.5.4.1.1.14 |
pnniMapEntryAn entry in the table, containing connectivity information about a node or link in the PNNI routing domain, as seen from the perspective of a PNNI logical node in this switching system. PnniMapEntry .1.3.6.1.4.1.353.5.4.1.1.14.1 |
pnniMapOriginatingNodeIdThe node identifier of the node whose connectivity within itself or to other nodes is being described. PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.14.1.1 |
pnniMapOriginatingPortIdThe port identifier of the port as assigned by the originating node, to which the port is attached. PnniPortId .1.3.6.1.4.1.353.5.4.1.1.14.1.2 |
pnniMapIndexAn index into the set of link and nodal connectivity associated with the originating node and port. This index is needed since there may be multiple entries for nodal connectivity from a specific node and port pair, in addition to any entry for a horizontal link or uplink. INTEGER .1.3.6.1.4.1.353.5.4.1.1.14.1.3 |
pnniMapTypeThe type of PNNI entity being described by this entry in the table.ro Enumeration .1.3.6.1.4.1.353.5.4.1.1.14.1.4 |
pnniMapPeerGroupIdIdentifies the peer group of the originating node.ro PnniPeerGroupId .1.3.6.1.4.1.353.5.4.1.1.14.1.5 |
pnniMapAggrTokenFor horizontal links to/from LGNs and for uplinks, this attribute contains the derived aggregation token value for this link. For nodes and for horizontal links between lowest-level nodes, this attribute is set to zero.ro PnniAggrToken .1.3.6.1.4.1.353.5.4.1.1.14.1.6 |
pnniMapRemoteNodeIdFor horizontal links and uplinks, this attribute contains the node identifier of the node at the other end of the link from the originating node. If unknown, the PNNI protocol entity sets this attribute's value to (all) zero(s). For nodes, this attribute's value is set to (all) zero(s).ro PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.14.1.7 |
pnniMapRemotePortIdFor horizontal links and uplinks, this attribute contains the port identifier of the port at the remote end of the link as assigned by the remote node. If unknown, the PNNI protocol entity sets this attribute's value to zero. For nodes, this attribute contains the port identifier of the port at the other end of the spoke or bypass from the originating port. When the originating port ID is zero, a value of zero indicates the default radius. When the originating port ID is non-zero, a value of zero indicates the nodal nucleus.ro PnniPortId .1.3.6.1.4.1.353.5.4.1.1.14.1.8 |
pnniMapVPCapabilityIndicates whether VPCs can be established across the PNNI entity being described by this entry in the pnniMapTable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.14.1.9 |
pnniMapPtseIdThe value of the PTSE Identifier for the PTSE being originated by the originating node which contains the information group(s) describing the PNNI entity.ro Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.14.1.10 |
pnniMapMetricsTagAn arbitrary integer that is used to associate a set of traffic parameters that are always advertised together. Within this set, the parameters are distinguished by the service categories and direction to which a set of parameters apply. This value is used as an index into the pnniMetricsTable. The distinguished value zero indicates that no metrics are associated with the link or nodal connectivity.ro PnniMetricsTag .1.3.6.1.4.1.353.5.4.1.1.14.1.11 |
pnniMapNodeTableA list of nodes as seen from the perspective of a local node. The pnniMapNodeTable contains all information learned by the local node from nodal information PTSEs. This entire object is read-only, reflecting the fact that the map is discovered dynamically during operation of the PNNI protocol rather than configured. SEQUENCE OF PnniMapNodeEntry .1.3.6.1.4.1.353.5.4.1.1.15 |
pnniMapNodeEntryAn entry in the table, containing information about a node in the PNNI routing domain, as seen from the perspective of a logical node in this switching system. PnniMapNodeEntry .1.3.6.1.4.1.353.5.4.1.1.15.1 |
pnniMapNodeIdIdentifies the node whose nodal information is being described. PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.15.1.1 |
pnniMapNodePeerGroupIdIdentifies the peer group of the originating node.ro PnniPeerGroupId .1.3.6.1.4.1.353.5.4.1.1.15.1.2 |
pnniMapNodeAtmAddressThe ATM End System Address of the originating node.ro PnniAtmAddr .1.3.6.1.4.1.353.5.4.1.1.15.1.3 |
pnniMapNodeRestrictedTransitIndicates whether the originating node is restricted to only allow support of SVCs originating or terminating at this node. A value of `true' indicates that the transit capabilities are restricted, i.e., transit connections are not allowed, whereas a value of `false' indicates that transit connections are allowed. This attribute reflects the setting of the restricted transit bit received in the nodal information PTSE of the originating node.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.15.1.4 |
pnniMapNodeComplexRepIndicates whether the originating node uses the complex node representation. If the value is `true', the spokes and bypasses that make up the complex node representation should be found in the pnniMapTable. This attribute reflects the setting of the nodal representation bit received in the nodal information PTSE of the originating node.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.15.1.5 |
pnniMapNodeRestrictedBranchingIndicates whether the originating node is able to support additional branches. If the value is 'false', then it can support additional branches. This attribute reflects the setting of the restricted branching bit received in the nodal information PTSE of the originating node.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.15.1.6 |
pnniMapNodeDatabaseOverloadIndicates whether the originating node is currently operating in topology database overload state. This attribute has the same value as the Non-transit for PGL Election bit in the nodal information group originated by this node.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.15.1.7 |
pnniMapNodeIAmLeaderIndicates whether the originating node claims to be peer group leader of its peer group. This attribute reflects the setting of the 'I am Leader' bit received in the nodal information PTSE of the originating node.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.15.1.8 |
pnniMapNodeLeadershipPriorityThe Leadership priority value advertised by the originating node.ro INTEGER .1.3.6.1.4.1.353.5.4.1.1.15.1.9 |
pnniMapNodePreferredPglIdentifies the node which the originating node believes should be or is peer group leader of its peer group. If the originating node has not chosen a Preferred PGL, this attribute's value is set to (all) zero(s).ro PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.15.1.10 |
pnniMapNodeParentNodeIdWhen the originating node is a peer group leader, indicates the node ID of the parent LGN. If the originating node is not peer group leader of its peer group, this attribute's value is set to (all) zero(s).ro PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.15.1.11 |
pnniMapNodeParentAtmAddressWhen the originating node is a peer group leader, indicates the ATM address of the parent LGN. If the originating node is not peer group leader of its peer group, this attribute's value is set to (all) zero(s).ro PnniAtmAddr .1.3.6.1.4.1.353.5.4.1.1.15.1.12 |
pnniMapNodeParentPeerGroupIdWhen the originating node is a peer group leader, indicates the node's parent peer group ID. If the originating node is not peer group leader of its peer group, this attribute's value is set to (all) zero(s).ro PnniPeerGroupId .1.3.6.1.4.1.353.5.4.1.1.15.1.13 |
pnniMapNodeParentPglNodeIdWhen the originating node is a peer group leader, identifies the node elected as peer group leader of the parent peer group. If the originating node is not peer group leader of its peer group, this attribute's value is set to (all) zero(s).ro PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.15.1.14 |
pnniMapAddrTableThe pnniMapAddr MIB Object contains a list of all reachable addresses from each node visible to the local node. The Local Node Index, Advertising Node ID, Advertised Port ID, Reachable Address, and Address prefix length are combined to form an instance ID for this object. The entire object is read-only, reflecting the fact that reachable addresses are discovered during dynamic operation of the PNNI protocol rather than configured. SEQUENCE OF PnniMapAddrEntry .1.3.6.1.4.1.353.5.4.1.1.16 |
pnniMapAddrEntryAn entry in the table, containing information about an address prefix reachable from a node in the PNNI routing domain, as seen from the perspective of a PNNI logical node in this switching system. PnniMapAddrEntry .1.3.6.1.4.1.353.5.4.1.1.16.1 |
pnniMapAddrAdvertisingNodeIdThe node ID of a node advertising reachability to the address prefix. PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.16.1.1 |
pnniMapAddrAdvertisedPortIdThe port identifier used from the advertising node to reach the given address prefix. PnniPortId .1.3.6.1.4.1.353.5.4.1.1.16.1.2 |
pnniMapAddrIndexAn arbitrary index that is used to enumerate all of the addresses advertised by the specified node. INTEGER .1.3.6.1.4.1.353.5.4.1.1.16.1.3 |
pnniMapAddrAddressThe value of the ATM End System Address prefix.ro AtmAddrPrefix .1.3.6.1.4.1.353.5.4.1.1.16.1.4 |
pnniMapAddrPrefixLengthThe Prefix length to be applied to the ATM End System Address prefix.ro PnniPrefixLength .1.3.6.1.4.1.353.5.4.1.1.16.1.5 |
pnniMapTnsTableA list of all reachable transit networks from each node visible to the local node. The Local Node Index, Advertising Node ID, Advertised Port ID, Transit Network Type, Transit Network Plan, and Transit Network ID are combined to form an instance ID for this object. The entire object is read-only, reflecting the fact that reachable transit networks are discovered during dynamic operation of the PNNI protocol rather than configured. SEQUENCE OF PnniMapTnsEntry .1.3.6.1.4.1.353.5.4.1.1.17 |
pnniMapTnsEntryAn entry in the table, containing information about a transit network reachable from a node in the PNNI routing domain, as seen from the perspective of a PNNI logical node in this switching system. PnniMapTnsEntry .1.3.6.1.4.1.353.5.4.1.1.17.1 |
pnniMapTnsAdvertisingNodeIdThe node ID of a node advertising reachability to the transit network. PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.17.1.1 |
pnniMapTnsAdvertisedPortIdThe port identifier used from the advertising node to reach the given transit network. PnniPortId .1.3.6.1.4.1.353.5.4.1.1.17.1.2 |
pnniMapTnsTypeThe type of network identification used for this transit network. TnsType .1.3.6.1.4.1.353.5.4.1.1.17.1.3 |
pnniMapTnsPlanThe network identification plan according to which network identification has been assigned. TnsPlan .1.3.6.1.4.1.353.5.4.1.1.17.1.4 |
pnniMapTnsIdThe value of the transit network identifier.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.17.1.5 |
pnniMetricsTableThis entity's table of PNNI parameters either associated with a PNNI entity or for the connectivity between a PNNI node and a reachable address or transit network. SEQUENCE OF PnniMetricsEntry .1.3.6.1.4.1.353.5.4.1.1.18 |
pnniMetricsEntryA set of parameters that applies to the connectivity from a certain node and port to another node or port or to one or more reachable address prefixes and/or transit networks, for one (or more) particular service category(s). Note that there can be multiple sets of parameters with the same tag, in which case all sets apply to the specified connectivity. PnniMetricsEntry .1.3.6.1.4.1.353.5.4.1.1.18.1 |
pnniMetricsTagAn arbitrary integer that is used to associate a set of traffic parameters that are always advertised together. Within this set, the parameters are distinguished by the service categories and direction to which a set of parameters apply. PnniMetricsTag .1.3.6.1.4.1.353.5.4.1.1.18.1.1 |
pnniMetricsDirectionThe direction, with respect to the advertising node, in which the parameters in this entry apply. Enumeration .1.3.6.1.4.1.353.5.4.1.1.18.1.2 |
pnniMetricsIndexAn index into the set of parameters associated with the given tag and direction. Integer32 .1.3.6.1.4.1.353.5.4.1.1.18.1.3 |
pnniMetricsClassesThe service categories to which this set of parameters applies. This is an integer used as a bit mask with each bit that is set representing a single service category for which the resources indicated are available. Bit 5 represents CBR, bit 4 represents real-time VBR, bit 3 represents non-real-time VBR, bit 2 represents ABR, and bit 1 (LSB) represents UBR.rw INTEGER .1.3.6.1.4.1.353.5.4.1.1.18.1.4 |
pnniMetricsGcacClpIndicates whether the advertised GCAC parameters apply for CLP=0 traffic or for CLP=0+1 traffic.rw ClpType .1.3.6.1.4.1.353.5.4.1.1.18.1.5 |
pnniMetricsAdminWeightThe administrative weight from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.18.1.6 |
pnniMetrics1An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned from PNNI nodes, this is the maximum cell rate in cells per second for the specified service categories. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.18.1.7 |
pnniMetrics2An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned from PNNI nodes, this is the available cell rate in cells per second for the specified service categories. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.18.1.8 |
pnniMetrics3An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned from PNNI nodes, this is the maximum cell transfer delay in microseconds for the specified service categories. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.18.1.9 |
pnniMetrics4An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned from PNNI nodes, this is the cell delay variation in microseconds for the specified service categories. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.18.1.10 |
pnniMetrics5An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For PNNI, this is the cell loss ratio for CLP=0 traffic for the specified service categories. The cell loss ratio value is computed as 10**(-n) where 'n' is the value returned in this variable. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.18.1.11 |
pnniMetrics6An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For PNNI, this is the cell loss ratio for CLP=0+1 traffic for the specified service categories. The cell loss ratio value is computed as 10**(-n) where 'n' is the value returned in this variable. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.18.1.12 |
pnniMetrics7An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned from PNNI nodes, this is the cell rate margin in cells per second for the specified service categories. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.18.1.13 |
pnniMetrics8An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned from PNNI nodes, this is the variance factor in units of 2**(-8) for the specified service categories. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.18.1.14 |
pnniMetricsRowStatusTo create, delete, activate and de-activate a set of metrics.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.18.1.15 |
pnniRoutingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.4.1.1.19 |
pnniRouteBaseGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.4.1.1.19.1 |
pnniRouteNodeNumberThe number of current precalculated PNNI routes to PNNI nodes that are not invalid.ro Gauge32 .1.3.6.1.4.1.353.5.4.1.1.19.1.1 |
pnniRouteAddrNumberThe number of current PNNI routes from nodes in the PNNI routing domain to addresses and transit networks that are not invalid.ro Gauge32 .1.3.6.1.4.1.353.5.4.1.1.19.1.2 |
pnniRouteNodeTableThis entity's PNNI Routing table (of routes to other nodes). SEQUENCE OF PnniRouteNodeEntry .1.3.6.1.4.1.353.5.4.1.1.19.2 |
pnniRouteNodeEntryA particular route to a particular destination node, under a particular policy. PnniRouteNodeEntry .1.3.6.1.4.1.353.5.4.1.1.19.2.1 |
pnniRouteNodeClassIndicates the service category with which this forwarding table entry is associated. ServiceCategory .1.3.6.1.4.1.353.5.4.1.1.19.2.1.1 |
pnniRouteNodeDestNodeIdThe node ID of the destination node to which this route proceeds, and at which the DTL stack for this route terminates. PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.19.2.1.2 |
pnniRouteNodeDTLThe index into the owning PNNI node's DTL table of the DTL stack that goes with this route. Integer32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.3 |
pnniRouteNodeDestPortIdThe port ID of the destination node at which the route terminates. A port ID of zero indicates the node nucleus. When the destination node is represented by the simple node representation, this value should be set to zero.rw PnniPortId .1.3.6.1.4.1.353.5.4.1.1.19.2.1.4 |
pnniRouteNodeProtoThe routing mechanism via which this route was learned.ro Enumeration .1.3.6.1.4.1.353.5.4.1.1.19.2.1.5 |
pnniRouteNodeTimeStampThe time at which this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.19.2.1.6 |
pnniRouteNodeInfoA reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's pnniRouteNodeProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER zeroDotZero.rw OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.4.1.1.19.2.1.7 |
pnniRouteNodeGcacClpFor PNNI, indicates whether any advertised GCAC parameters apply for CLP=0 traffic or for CLP=0+1 traffic.rw ClpType .1.3.6.1.4.1.353.5.4.1.1.19.2.1.8 |
pnniRouteNodeFwdMetricAWThe cumulative administrative weight calculated for the forward direction of this route. If this metric is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.9 |
pnniRouteNodeFwdMetric1An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the maximum possible cell rate (in cells per second) for the forward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.10 |
pnniRouteNodeFwdMetric2An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the Available cell rate (in cells per second) for the forward direction of the route. Further information on available bandwidth may be obtainable by reference to the nodal advertisements of the nodes in the path. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.11 |
pnniRouteNodeFwdMetric3An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the cumulative Maximum Cell Transfer Delay (in microseconds) for the forward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.12 |
pnniRouteNodeFwdMetric4An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Delay Variation (in microseconds) for the forward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.13 |
pnniRouteNodeFwdMetric5An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Loss Ratio for CLP=0 traffic for the forward direction of the route. The cell loss ratio value is computed as 10**(-n) where 'n' is the value returned in this variable. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.14 |
pnniRouteNodeFwdMetric6An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Loss Ratio for CLP=0+1 traffic for the forward direction of the route. The cell loss ratio value is computed as 10**(-n) where 'n' is the value returned in this variable. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.15 |
pnniRouteNodeFwdMetric7An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the Cell Rate Margin (in cells per second) for the forward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.16 |
pnniRouteNodeFwdMetric8An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the Variance Factor (in units of 2**(-8)) for the forward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.17 |
pnniRouteNodeBwdMetricAWThe administrative weight calculated for the backward direction of this route. If this metric is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.18 |
pnniRouteNodeBwdMetric1An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the maximum possible cell rate (in cells per second) for the backward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.19 |
pnniRouteNodeBwdMetric2An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the Available cell rate (in cells per second) for the backward direction of the route. Further information on available bandwidth may be obtainable by reference to the nodal advertisements of the nodes in the path. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.20 |
pnniRouteNodeBwdMetric3An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the cumulative Maximum Cell Transfer Delay (in microseconds) for the backward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.21 |
pnniRouteNodeBwdMetric4An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Delay Variation (in microseconds) for the backward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.22 |
pnniRouteNodeBwdMetric5An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Loss Ratio for CLP=0 traffic for the backward direction of the route. The cell loss ratio value is computed as 10**(-n) where 'n' is the value returned in this variable. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.23 |
pnniRouteNodeBwdMetric6An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Loss Ratio for CLP=0+1 traffic for the backward direction of the route. The cell loss ratio value is computed as 10**(-n) where 'n' is the value returned in this variable. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.24 |
pnniRouteNodeBwdMetric7An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the Cell Rate Margin (in cells per second) for the backward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.25 |
pnniRouteNodeBwdMetric8An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the Variance Factor (in units of 2**(-8)) for the backward direction of the route. If this parameter is not used, its value should be set to 0xFFFFFFFF.rw Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.2.1.26 |
pnniRouteNodeVPCapabilityThis attribute indicates whether a VPC setup on this route is possible.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.19.2.1.27 |
pnniRouteNodeStatusThe row status variable, used according to row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.19.2.1.28 |
pnniDTLTableThe set of all DTL stacks used for the pre-computed routes maintained by this managed entity. SEQUENCE OF PnniDTLEntry .1.3.6.1.4.1.353.5.4.1.1.19.3 |
pnniDTLEntryA segment of a DTL stack. The complete DTL stack is formed by traversing the rows of the table for which the pnniDTLIndex is the same. Level transitions are indicated using the pnniDLTLinkType column. PnniDTLEntry .1.3.6.1.4.1.353.5.4.1.1.19.3.1 |
pnniDTLIndexThe index in the node's DTL table of this DTL stack. Integer32 .1.3.6.1.4.1.353.5.4.1.1.19.3.1.1 |
pnniDTLEntryIndexThe index in the current DTL stack of this entry. Integer32 .1.3.6.1.4.1.353.5.4.1.1.19.3.1.2 |
pnniDTLNodeIdThe node which is this hop in the DTL stack.rw PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.19.3.1.3 |
pnniDTLPortIdThe port from the pnniDTLNodeId to use as the exit. If the DTL stack does not care, this is coded as zero.rw PnniPortId .1.3.6.1.4.1.353.5.4.1.1.19.3.1.4 |
pnniDTLLinkTypeThe type of link out from this node (pnniDTLNodeId). This is well defined even if the specific port is not specified.rw Enumeration .1.3.6.1.4.1.353.5.4.1.1.19.3.1.5 |
pnniDTLStatusThe row status variable, used according to row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.19.3.1.6 |
pnniRouteAddrTableA table containing all the attributes necessary to determine what the PNNI entity believes is reachable in terms of ATM End System Addresses and to determine which nodes are advertising this reachability. This table is also used to configure static routes to reachable address prefixes. The local node index that received the reachability information, reachable address, address prefix length, and an index that distinguishes between multiple listings of connectivity to a given address prefix from a given local node are combined to form an instance ID for this object. SEQUENCE OF PnniRouteAddrEntry .1.3.6.1.4.1.353.5.4.1.1.19.4 |
pnniRouteAddrEntryAn entry in the table, containing information about a reachable address prefix. PnniRouteAddrEntry .1.3.6.1.4.1.353.5.4.1.1.19.4.1 |
pnniRouteAddrAddressThe value of the ATM End System Address prefix. AtmAddrPrefix .1.3.6.1.4.1.353.5.4.1.1.19.4.1.1 |
pnniRouteAddrPrefixLengthThe prefix length to be applied to the ATM End System Address prefix. PnniPrefixLength .1.3.6.1.4.1.353.5.4.1.1.19.4.1.2 |
pnniRouteAddrIndexAn index into the set of listings of connectivity to a given address prefix from a given local node. Integer32 .1.3.6.1.4.1.353.5.4.1.1.19.4.1.3 |
pnniRouteAddrIfIndexThe local interface over which the reachable address can be reached. The value zero indicates an unknown interface or reachability through a remote node. This object may only have a non-zero value if the value of the corresponding instance of pnniRouteAddrProto is other than 'pnni', pnniRouteAddrType is other than 'reject', and the node identified by pnniRouteAddrAdvertisingNodeId is instantiated within this switching system.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.353.5.4.1.1.19.4.1.4 |
pnniRouteAddrAdvertisingNodeIdThe node ID of a node advertising reachability to the address prefix. If the local node index is zero, then the advertising node ID must be set to all zeros.rw PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.19.4.1.5 |
pnniRouteAddrAdvertisedPortIdThe port identifier used from the advertising node to reach the given address prefix.rw PnniPortId .1.3.6.1.4.1.353.5.4.1.1.19.4.1.6 |
pnniRouteAddrTypeThe type (e.g. internal or exterior) of reachability from the advertising node to the address prefix. Reject(2) refers to an address prefix which, if matched, indicates that the message should be discarded as unreachable. This is used in some protocols as a means of correctly aggregating routes.rw Enumeration .1.3.6.1.4.1.353.5.4.1.1.19.4.1.7 |
pnniRouteAddrProtoThe routing mechanism via which the connectivity from the advertising node to the reachable address prefix was learned.ro Enumeration .1.3.6.1.4.1.353.5.4.1.1.19.4.1.8 |
pnniRouteAddrPnniScopeThe PNNI scope of advertisement (i.e. level of PNNI hierarchy) of the reachability from the advertising node to the address prefix.rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.19.4.1.9 |
pnniRouteAddrVPCapabilityIndicates whether VPCs can be established from the advertising node to the reachable address prefix.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.19.4.1.10 |
pnniRouteAddrMetricsTagThe index into the pnniMetricsTable for the traffic parameter values that apply for the connectivity from the advertising node to the reachable address prefix. There will be one or more entries in the pnniMetricsTable whose first instance identifier matches the value of this variable. If there are no parameters associated with this reachable address prefix then the distinguished value zero is used.rw PnniMetricsTag .1.3.6.1.4.1.353.5.4.1.1.19.4.1.11 |
pnniRouteAddrPtseIdFor reachable addresses learned via PNNI, this attribute contains the value of the PTSE Identifier for the PTSE being originated by the originating node which contains the information group(s) describing the reachable address. For reachable addresses learned by means other than PNNI, this attribute is set to zero.ro Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.4.1.12 |
pnniRouteAddrOriginateAdvertisementWhether or not the reachable address specified by this entry is to be advertised by the local node into its PNNI routing domain. This object may only take on the value 'true' when the value of the corresponding instance of pnniRouteAddrProto is other than 'pnni'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.19.4.1.13 |
pnniRouteAddrInfoA reference to MIB definitions specific to the particular routing protocol which is responsible for this reachable address prefix, as determined by the value specified in the route's pnniRouteAddrProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER zeroDotZero.rw OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.4.1.1.19.4.1.14 |
pnniRouteAddrOperStatusIndicates whether the reachable address prefix is operationally valid and whether it is being advertised by this node.ro Enumeration .1.3.6.1.4.1.353.5.4.1.1.19.4.1.15 |
pnniRouteAddrTimeStampIndicates when the connectivity from the advertising node to the reachable address prefix became known to the local node.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.19.4.1.16 |
pnniRouteAddrRowStatusTo create, delete, activate and de-activate a reachable address prefix.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.19.4.1.17 |
pnniRouteTnsTableA table containing all the attributes necessary to determine what transit networks the PNNI entity believes are reachable and to determine which nodes are advertising this reachability. This table is also used to add static routes to reachable transit networks. The local node index which received the reachability information, type of network identification, network identification plan, transit network identifier, and an index that distinguishes between multiple listings of connectivity to a given transit network from a given local node are combined to form an instance ID for this object. SEQUENCE OF PnniRouteTnsEntry .1.3.6.1.4.1.353.5.4.1.1.19.5 |
pnniRouteTnsEntryAn entry in the table, containing information about a reachable transit network. PnniRouteTnsEntry .1.3.6.1.4.1.353.5.4.1.1.19.5.1 |
pnniRouteTnsTypeThe type of network identification used for this transit network. TnsType .1.3.6.1.4.1.353.5.4.1.1.19.5.1.1 |
pnniRouteTnsPlanThe network identification plan according to which network identification has been assigned. TnsPlan .1.3.6.1.4.1.353.5.4.1.1.19.5.1.2 |
pnniRouteTnsIdThe value of the transit network identifier. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.19.5.1.3 |
pnniRouteTnsIndexAn index into the set of listings of connectivity to a given transit network from a given local node. Integer32 .1.3.6.1.4.1.353.5.4.1.1.19.5.1.4 |
pnniRouteTnsIfIndexThe local interface over which the transit network can be reached. The value zero indicates an unknown interface or reachability through a remote node. This object may only have a non-zero value if the value of the corresponding instance of pnniRouteTnsProto is other than 'pnni' and the node identified by pnniRouteTnsAdvertisingNodeId is instantiated within this switching system.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.353.5.4.1.1.19.5.1.5 |
pnniRouteTnsAdvertisingNodeIdThe node ID of a node advertising reachability to the transit network. If the local node index is zero, then the advertising node ID must also be set to zero.rw PnniNodeId .1.3.6.1.4.1.353.5.4.1.1.19.5.1.6 |
pnniRouteTnsAdvertisedPortIdThe port identifier used from the advertising node to reach the given transit network.rw PnniPortId .1.3.6.1.4.1.353.5.4.1.1.19.5.1.7 |
pnniRouteTnsRouteTypeThe type (e.g. exterior or other) of reachability from the advertising node to the transit network.rw Enumeration .1.3.6.1.4.1.353.5.4.1.1.19.5.1.8 |
pnniRouteTnsProtoThe routing mechanism via which the connectivity from the advertising node to the transit network was learned.ro Enumeration .1.3.6.1.4.1.353.5.4.1.1.19.5.1.9 |
pnniRouteTnsPnniScopeThe PNNI scope of advertisement (i.e. level of PNNI hierarchy) of the reachability from the advertising node to the transit network.rw PnniLevel .1.3.6.1.4.1.353.5.4.1.1.19.5.1.10 |
pnniRouteTnsVPCapabilityIndicates whether VPCs can be established from the advertising node to the reachable transit network.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.19.5.1.11 |
pnniRouteTnsMetricsTagThe index into the pnniMetricsTable for the traffic parameter values that apply for the connectivity from the advertising node to the transit network. There will be one or more entries in the pnniMetricsTable whose first instance identifier matches the value of this variable. If there are no parameters associated with this transit network then the distinguished value zero is used.rw PnniMetricsTag .1.3.6.1.4.1.353.5.4.1.1.19.5.1.12 |
pnniRouteTnsPtseIdFor reachable transit networks learned via PNNI, this attribute contains the value of the PTSE Identifier for the PTSE being originated by the originating node which contains the information group(s) describing the transit network. For reachable transit networks learned by means other than PNNI, this attribute is set to zero.ro Unsigned32 .1.3.6.1.4.1.353.5.4.1.1.19.5.1.13 |
pnniRouteTnsOriginateAdvertisementWhether or not the transit network specified by this entry is to be advertised by the local node into its PNNI routing domain. This object may only take on the value 'true' when the value of the corresponding instance of pnniRouteNodeProto is other than 'pnni'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.19.5.1.14 |
pnniRouteTnsInfoA reference to MIB definitions specific to the particular routing protocol which is responsible for this transit network, as determined by the value specified in the route's pnniRouteTnsProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER zeroDotZero.rw OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.4.1.1.19.5.1.15 |
pnniRouteTnsOperStatusIndicates whether the reachable transit network is operationally valid and whether it is being advertised by this node.ro Enumeration .1.3.6.1.4.1.353.5.4.1.1.19.5.1.16 |
pnniRouteTnsTimeStampIndicates how long the connectivity from the advertising node to the reachable transit network has been known to the local node.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.19.5.1.17 |
pnniRouteTnsRowStatusTo create, delete, activate and de-activate a reachable transit network.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.19.5.1.18 |
pnniSummaryAddressTableA list of the summary address prefixes that may be advertised by the specified logical PNNI entity. SEQUENCE OF PnniSummaryAddressEntry .1.3.6.1.4.1.353.5.4.1.1.20 |
pnniSummaryAddressEntryAn entry in the table, containing summary address prefix information in this switching system. PnniSummaryAddressEntry .1.3.6.1.4.1.353.5.4.1.1.20.1 |
pnniSummaryAddressTypeThe type (e.g. internal or exterior) of summary being described. Enumeration .1.3.6.1.4.1.353.5.4.1.1.20.1.1 |
pnniSummaryAddressAddressThe ATM End System Address prefix for the summary. AtmAddrPrefix .1.3.6.1.4.1.353.5.4.1.1.20.1.2 |
pnniSummaryAddressPrefixLengthThe prefix length for the summary. PnniPrefixLength .1.3.6.1.4.1.353.5.4.1.1.20.1.3 |
pnniSummaryAddressSuppressDetermines what is done with addresses that are being summarized by the instance. The default value (e.g. false) will indicate that the summary should propagate into the peer group. Network Management will be able to set the value of this attribute to `suppress' (e.g. true), which suppresses the summary and any reachable addresses it summarizes from being advertised into the peer group.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.20.1.4 |
pnniSummaryAddressStateIndicates whether the summary is currently being advertised by the node within the local switching system into its peer group.ro Enumeration .1.3.6.1.4.1.353.5.4.1.1.20.1.5 |
pnniSummaryAddressRowStatusTo create, delete, activate and de-activate a summary.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.4.1.1.20.1.6 |
pnniMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.4.1.2 |
pnniMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.4.1.2.1 |
pnniMIBComplianceThe compliance statement for entities which implement the PNNI MIB. Groups of PNNI objects required for management of a minimum function node are identified by the suffix MinGroup. Groups of PNNI objects required for management of a border node are identified by the suffix BorderGroup. Groups of PNNI objects required for management of a PGL/LGN capable node are identified by the suffix LgnGroup. Groups of optional PNNI objects are identified by the suffix OptionalGroup. Unknown .1.3.6.1.4.1.353.5.4.1.2.1.1 |
pnniMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.4.1.2.2 |
pnniGeneralMinGroupA collection of general PNNI objects required for management of a minimum function switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.1 |
pnniGeneralBorderGroupA collection of general PNNI objects required for management of a border node. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.2 |
pnniNodeMinGroupA collection of per node PNNI objects required for management of a minimum function switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.3 |
pnniNodePglMinGroupA collection of per node PGL election related PNNI objects required for management of a minimum function switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.4 |
pnniNodePglLgnGroupA collection of per node PGL election related PNNI objects required for management of a PGL/LGN capable switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.5 |
pnniNodeTimerMinGroupA collection of per node PNNI objects required for management of timers and significant change thresholds in a minimum function switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.6 |
pnniNodeTimerLgnGroupA collection of per node PNNI objects required for management of timers in a PGL/LGN capable switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.7 |
pnniNodeSvccLgnGroupA collection of per node SVCC-based RCC related PNNI objects required for management of a PGL/LGN capable switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.8 |
pnniScopeMinGroupA collection of per node scope mapping related PNNI objects required for management of a minimum function switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.9 |
pnniSummaryLgnGroupA collection of PNNI objects required for controlling address summarization.deprecated Unknown .1.3.6.1.4.1.353.5.4.1.2.2.10 |
pnniIfMinGroupA collection of per interface PNNI objects required for management of a minimum function switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.11 |
pnniIfBorderGroupA collection of per interface PNNI objects required for management of a border node. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.12 |
pnniLinkMinGroupA collection of per link PNNI objects required for management of a minimum function switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.13 |
pnniLinkBorderOrLgnGroupA collection of per link PNNI objects required for management of a border node or a PGL/LGN capable switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.14 |
pnniLinkLgnGroupA collection of per link PNNI objects required for management of a PGL/LGN capable switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.15 |
pnniNbrPeerMinGroupA collection of per neighboring peer PNNI objects required for management of a minimum function switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.16 |
pnniNbrPeerLgnGroupA collection of per neighboring peer PNNI objects required for management of a PGL/LGN capable switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.17 |
pnniNbrPeerPortMinGroupA collection of per port to neighboring peer PNNI objects required for management of a minimum function switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.18 |
pnniSvccRccLgnGroupA collection of per SVCC-based RCC PNNI objects required for management of a PGL/LGN capable switching system. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.19 |
pnniPtseOptionalGroupA collection of optional per PTSE PNNI objects. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.20 |
pnniMapOptionalGroupA collection of optional PNNI objects used to create a map of nodes and links in the PNNI routing domain. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.21 |
pnniMapNodeOptionalGroupA collection of optional PNNI objects used to create a map of nodes in the PNNI routing domain. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.22 |
pnniMapAddrOptionalGroupA collection of optional PNNI objects used to create a map of reachable addresses in the PNNI routing domain. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.23 |
pnniMapTnsOptionalGroupA collection of optional PNNI objects used to create a map of reachable transit networks in the PNNI routing domain. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.24 |
pnniMetricsOptionalGroupA collection of optional PNNI objects used to manage metrics and attributes associated with PNNI entities. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.25 |
pnniRouteGeneralOptionalGroupA collection of optional PNNI objects. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.26 |
pnniRouteNodeOptionalGroupA collection of optional PNNI objects used to manage precalculated routes to nodes in the PNNI routing domain. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.27 |
pnniDTLOptionalGroupA collection of optional PNNI objects used to manage precalculated routes to nodes in the PNNI routing domain. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.28 |
pnniRouteAddrOptionalGroupA collection of optional PNNI objects used to manage routes to reachable addresses in the PNNI routing domain. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.29 |
pnniRouteTnsOptionalGroupA collection of optional PNNI objects used to manage routes to reachable transit networks in the PNNI routing domain. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.30 |
pnniSummaryAddressLgnGroupA collection of PNNI objects required for controlling address summarization. Unknown .1.3.6.1.4.1.353.5.4.1.2.2.31 |