ERR-STATUS-MIB
Standard SNMP MIB module defining data structures for ERR-STATUS-MIB.
Imported Objects
Objects
8 total| Object Name |
|---|
strmErrors OBJECT IDENTIFIER .1.3.6.1.4.1.351.910 |
CISCOWAN-SMI Unknown .1.3.6.1.4.1.351.910 |
errStatusLastIndexIf at least one entry exists in the error status table
for the given manager, the value of this object contains
the index corresponding to the last entry. If no entry
exists in the error status table for the given manager
the value of this object is -1.ro INTEGER .1.3.6.1.4.1.351.910.1 |
errStatusTableA List of Error Statuses for a given SNMP Manager SEQUENCE OF ErrStatusTableEntry .1.3.6.1.4.1.351.910.2 |
errStatusTableEntryA General Error Status Entry. ErrStatusTableEntry .1.3.6.1.4.1.351.910.2.1 |
errReqIdThis object contains the PDU request ID associated with
the error.ro INTEGER .1.3.6.1.4.1.351.910.2.1.1 |
errCodeThis object contains an error status code used by
the manager to take automated corrective actions
when previous SET requests encountered failures.
If no error is encountered on prior SET requests,
a successful(1) status might be provided at the
discretion of the agent.ro Enumeration .1.3.6.1.4.1.351.910.2.1.2 |
errStatusDescThis object contains error status information for
failed SETS to one or more objects. This object is
updated only on failed SETS.
Since the SNMP standard allows only limited number of
error status returns, the managers can retrieve this
variable to get additional information on a
failed SET. Typically this object will contain
information specifying date, MIB object Name,
and additional error specific information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.351.910.2.1.3 |
More MIBs from Stratacom
Browse all StratacomMIBs →Standard SNMP MIB module defining data structures for CISCO-WAN-AXIPOP-MIB.
Standard SNMP MIB module defining data structures for STRATACOM-MIB.
The CISCO-WAN-SVC-MIB manages ATM service provisioning, configuration, and status monitoring on Cisco BPX-SES and MGX ATM switches, specifically tracking XPVC/XPVP segments, OAM cell handling, and ENNI auto-discovery via ILMI. It facilitates the administration of ATM traffic classes (CBR, VBR, UBR, ABR) and virtual circuit states (SVC, SPVC) across User-Network and Network-Network interfaces.
Standard SNMP MIB module defining data structures for CISCO-MGX82XX-SONET-MIB.
The CISCO-MGX82XX-DSX3-MIB enables configuration and monitoring of DS3/E3 interface parameters, including alarm states (AIS, LOF, RAI), performance statistics, and Bit Error Rate Testing (BERT) on Cisco MGX 8220/8230 T3/E3 service modules such as the CESM-T3E3 and FRSM-VHS. This module facilitates the management of physical layer convergence procedures (PLCP) and maintenance byte fields (Tx/Rx MA) defined by ITU-T G.832 for channelized T3 and E3 circuits.
The CISCO-WAN-PAR-MIB manages the Portable AutoRoute (PAR) controller on Cisco MGX and BPX switches to provision, monitor, and alarm connections while controlling LMI communication and clocking selection. It enables the configuration of routing capabilities, failure event conditioning, and the management of feeder-to-node signaling and switch synchronization.