SRM-MIB
Standard SNMP MIB module defining data structures for SRM-MIB.
Imported Objects
Objects
18 total| Object Name |
|---|
srm3T3CnfGrp OBJECT IDENTIFIER .1.3.6.1.4.1.351.110.3.10 |
IMPORTS Unknown .1.3.6.1.4.1.351.110.3.10 |
srm3T3CnfGrpTableThe SRM 3T3 configuration table, it is the
distribution of a T3 line. SEQUENCE OF Srm3T3CnfGrpEntry .1.3.6.1.4.1.351.110.3.10.1 |
srm3T3CnfGrpEntryan entry in the T3 configuration table Srm3T3CnfGrpEntry .1.3.6.1.4.1.351.110.3.10.1.1 |
srmT3LineNumSelect T3 line number.
There is no default value for this object.ro INTEGER .1.3.6.1.4.1.351.110.3.10.1.1.1 |
srmStartT1LineNumThe start T1 number to be affected.
There is no default value for this object.ro INTEGER .1.3.6.1.4.1.351.110.3.10.1.1.2 |
srmT1RowStatusa command is used to add, delete, or modify
one or more DS1 mapping.
Default value is delete.rw Enumeration .1.3.6.1.4.1.351.110.3.10.1.1.3 |
srmTargetSlotNumspecify the target slot number to be linked.
There is no default value for this object.
For MGX8850: SRM01 services slots 1 - 6 and 9 - 14,
SRM02 services slots 17 - 22 and 25 - 30
For MGX8220: SYNTAX INTEGER (5 ..14)rw INTEGER .1.3.6.1.4.1.351.110.3.10.1.1.4 |
srmTargetSlotLineNum0 means not assigned.
There is no default value for this object.rw INTEGER .1.3.6.1.4.1.351.110.3.10.1.1.5 |
srmeCnfGrp OBJECT IDENTIFIER .1.3.6.1.4.1.351.110.3.22 |
srmeCnfGrpTableThe SRME configuration table for bulk distribution of
SRME lines. SEQUENCE OF SrmeCnfGrpEntry .1.3.6.1.4.1.351.110.3.22.1 |
srmeCnfGrpEntryan entry in the SRME Distribution configuration table SrmeCnfGrpEntry .1.3.6.1.4.1.351.110.3.22.1.1 |
srmeLineNumSelect SRME line number.
For OC3/STM1: SYNTAX INTEGER 1
There is no default value for this object.ro INTEGER .1.3.6.1.4.1.351.110.3.22.1.1.1 |
srmeStartVtNumThe start T1 or E1 number (virtual tributary) to be affected.
For OC3 with T1 tributaries: SYNTAX INTEGER (1 .. 84)
For STM1 with E1 tributaries: SYNTAX INTEGER (1 .. 63)
There is no default value for this object.ro INTEGER .1.3.6.1.4.1.351.110.3.22.1.1.2 |
srmeRowStatusCommand used to add, delete, or modify
one or more T1 or E1 mappings. Only the
srmeVtFramingType object can be modified once the
distribution link is added. To modify all other
objects, user should first delete the link and
add it again.
Default value is modify.rw Enumeration .1.3.6.1.4.1.351.110.3.22.1.1.3 |
srmeTargetSlotNumspecify the target slot number to be linked.
There is no default value for this object.
For MGX8x50: SRM01 services slots 1 - 6 and 9 - 14,
SRM02 services slots 17 - 22 and 25 - 30
For MGX8x30: service slots 3-6 and 10-13rw INTEGER .1.3.6.1.4.1.351.110.3.22.1.1.4 |
srmeTargetSlotLineNumSpecify the target slot's line to be linked.
0 means not assigned.
There is no default value for this object.rw INTEGER .1.3.6.1.4.1.351.110.3.22.1.1.5 |
srmeVtFramingTypeSpecifies the Framing Type of the target slot line.
This is applicable only if the target module is a
T1 Service Module and byte sync mapping is used on
SRME. Not applicable to E1 Service Modules.
sf: Superframe or D4
esf: Extended Superframe.
Default is 'esf' if SRME lines are configured for
byte-synchronous mapping, Else, the default is notApplicable.rw Enumeration .1.3.6.1.4.1.351.110.3.22.1.1.6 |
More MIBs from Stratacom
Browse all StratacomMIBs →Standard SNMP MIB module defining data structures for CISCO-WAN-AXIPOP-MIB.
Standard SNMP MIB module defining data structures for STRATACOM-MIB.
The CISCO-WAN-SVC-MIB manages ATM service provisioning, configuration, and status monitoring on Cisco BPX-SES and MGX ATM switches, specifically tracking XPVC/XPVP segments, OAM cell handling, and ENNI auto-discovery via ILMI. It facilitates the administration of ATM traffic classes (CBR, VBR, UBR, ABR) and virtual circuit states (SVC, SPVC) across User-Network and Network-Network interfaces.
Standard SNMP MIB module defining data structures for CISCO-MGX82XX-SONET-MIB.
The CISCO-MGX82XX-DSX3-MIB enables configuration and monitoring of DS3/E3 interface parameters, including alarm states (AIS, LOF, RAI), performance statistics, and Bit Error Rate Testing (BERT) on Cisco MGX 8220/8230 T3/E3 service modules such as the CESM-T3E3 and FRSM-VHS. This module facilitates the management of physical layer convergence procedures (PLCP) and maintenance byte fields (Tx/Rx MA) defined by ITU-T G.832 for channelized T3 and E3 circuits.
The CISCO-WAN-PAR-MIB manages the Portable AutoRoute (PAR) controller on Cisco MGX and BPX switches to provision, monitor, and alarm connections while controlling LMI communication and clocking selection. It enables the configuration of routing capabilities, failure event conditioning, and the management of feeder-to-node signaling and switch synchronization.