CISCO-WAN-BBIF-ILMI-MIB
AI MIB Summary
The CISCO-WAN-BBIF-ILMI-MIB manages ILMI configuration and tracks performance statistics for ATM logical ports on the PXM1 service module within Cisco MGX82xx broadband WAN switches. This module specifically monitors the Local Management Interface state and associated counters required for ATM cell-based network operations.
The MIB module for ILMI configuration and ILMI statistics for broad band interface ports in PXM1 service module. PXM1 service module is supported in MGX82xx series products. The broadband interface referred to in this mib is for ATM logical ports.
Main OID:
ciscoWanBbifIlmiMIB.1.3.6.1.4.1.351.150.33
44
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
44 total| Object Name |
|---|
bbIfCnfSigILMIGrp OBJECT IDENTIFIER .1.3.6.1.4.1.351.110.5.2.6.1.2 |
bbIfCnfSigILMIGrpTableThis table contains ILMI configuration parameters for a broadband interface. SEQUENCE OF BbIfCnfSigILMIGrpEntry .1.3.6.1.4.1.351.110.5.2.6.1.2.1 |
bbIfCnfSigILMIGrpEntryAn entry for a boradband interface used as a UNI port. Each entry contains ILMI configuration parameters and variables for a broadband interface. BbIfCnfSigILMIGrpEntry .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1 |
bbIfSigPortNumThis object refers to the broadband interface. The value for this object is same as value specified in bbIfNum object from bbIfCnfGrpTable.ro Integer32 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.1 |
bbIfIlmiEnableThe logical interface is a generic entity, it can be used as either a virtual trunk, or user port with UNI support. This variable is provided to enable/disable ILMI. ILMI should only be enabled on 'user ports' and not on 'virtual trunks' 1 - disable 2 - enablerw Enumeration .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2 |
bbIfSignallingProtocolTypeThis will set the signalling protocol other(1) : other noSignalling(2) : noSignalling iLMI(3) : ILMIrw Enumeration .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.3 |
bbIfSignallingVpiThis object specifies the VPI on which signalling cells received.rw Integer32 (0..4095 ) .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.4 |
bbIfSignallingVciThis object specifies the VPI on which signalling cells received.rw Integer32 (0..'ffff'h ) .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.5 |
bbIfAddrPrefixNetwork Prefix for the ATM address.rw AtmIlmiNetworkPrefix (ATM-TC-MIB) .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.6 |
bbIfCustomerIdThis represents the customer Id.rw Integer32 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.7 |
bbIfProtocolRevNoThis object represents the protocol revision number.rw Integer32 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.8 |
bbIfIlmiTrapEnableThis object is used for enabling/disabling the sending of ILMI traps.rw Enumeration .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.9 |
bbIfMinTrapIntervalThis object specifies the minimum throttling period of notification generation. The notificaton events should be suppressed by the agent until the current throttling period expires.rw Integer32 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.10 |
bbIfKeepAlivePollingEnableEnable/disable Keep Alive Polling.rw Enumeration .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.11 |
bbIfErrorThresholdN491This object specifies Error Threshold (N491) value. The number of keep alive polls that must fail within a window of N491 polls, before the port is placed in the failed state. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).rw Integer32 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.12 |
bbIfEventThresholdN492This object specifies Error Threshold (N492) value. The number of keep alive polls that must fail within a window of N492 polls, before the port is placed in the failed state. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).rw Integer32 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.13 |
bbIfPollingIntervalT491This object specifies Polling Interval (T491) value. The T491 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).rw Enumeration .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.14 |
bbIfMinEnquiryIntervalT493This object specifies minimum Enquiry Interval(T493) value. The T493 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).rw Integer32 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.15 |
bbIfAddrRegEnableEnable/disable ILMI Address Registration.rw Enumeration .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.16 |
bbIfCntSigILMIGrp OBJECT IDENTIFIER .1.3.6.1.4.1.351.110.5.2.6.4.2 |
bbIfCntSigILMIGrpTableThis table contains statistics related to ILMI. SEQUENCE OF BbIfCntSigILMIGrpEntry .1.3.6.1.4.1.351.110.5.2.6.4.2.1 |
bbIfCntSigILMIGrpEntryAn entry for a boradband interface used as a UNI port. BbIfCntSigILMIGrpEntry .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1 |
sigCntBbIfNumThis object refers to the broadband interface. The value for this object is same as value specified in bbIfSigPortNum object from bbIfCnfSigILMIGrpTable.ro Integer32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.1 |
bbIfSnmpPduReceivedThe number of snmp packets received on this logical interface.ro Counter32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.2 |
bbIfGetRequestReceivedThe number of get request messages received.ro Counter32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.3 |
bbIfGetNextRequestReceivedThe number of get-next messages received.ro Counter32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.4 |
bbIfSetRequestReceivedThe number of set messages received.ro Counter32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.5 |
bbIfTrapReceivedThe number of traps received.ro Counter32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.6 |
bbIfGetResponseReceivedThe number of Keep Alive response messages received.ro Counter32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.7 |
bbIfGetResponseTransmittedThe number of response messages transmitted.ro Counter32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.8 |
bbIfGetRequestTransmittedThe number of Keep Alive get request messages transmitted.ro Counter32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.9 |
bbIfTrapTransmittedThe number of trap messages transmitted.ro Counter32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.10 |
bbIfInvalidPDUReceivedThe number of invalid PDUs received.ro Counter32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.11 |
bbIfAsn1ParseErrorThe number of parse errors on ASN.1.ro Counter32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.12 |
bbIfNoSuchNameErrorThe number of errors for name not present.ro Counter32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.13 |
bbIfTooBigErrorThe number of messages received with len > 484.ro Counter32 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.14 |
bbIfSigCntClrButtonWriting a value of 2 resets all the counters from bbIfCntSigILMIGrpTable.rw Enumeration .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.15 |
ciscoWanBbifIlmiMIBThe MIB module for ILMI configuration and ILMI statistics for broad band interface ports in PXM1 service module. PXM1 service module is supported in MGX82xx series products. The broadband interface referred to in this mib is for ATM logical ports. MODULE-IDENTITY .1.3.6.1.4.1.351.150.33 |
cwbIlmiMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.33.2 |
cwbIlmiMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.33.2.1 |
cwbIlmiConfGroupThe collection of objects which are used for configuring ILMI on broad band interface ports. Unknown .1.3.6.1.4.1.351.150.33.2.1.1 |
cwbIlmiStatsGroupThe collection of objects containing the ILMI statistics on broad band interface ports. Unknown .1.3.6.1.4.1.351.150.33.2.1.2 |
cwbIlmiMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.33.2.2 |
cwbIlmiComplianceThe compliance statement for objects related to SRM MIB. Unknown .1.3.6.1.4.1.351.150.33.2.2.1 |