CISCO-WAN-FEEDER-MIB
AI MIB Summary
The CISCO-WAN-FEEDER-MIB configures ATM switch modules to manage feeder connections and Auto Route (AR) parameters within PNNI networks, specifically monitoring Local Management Interface (LMI) status and XLMI extensions for external non-PNNI ATM switches.
This MIB is used for configuring a port on an ATM switch module to be aware of feeder connection information. Terminology: AR - Auto Route, a CISCO proprietary feature, provides connection management for network with only CISCO nodes such as BPX or IGX. Feeder - An external ATM switch, which does not have PNNI feature, connected to an ATM switch that supports PNNI to provide LMI. LMI - Local Management Interface is an interface to provide a set of enhancements to Frame Relay specification for managing complex internetworks. LMI extensions include global addressing, virtual-circuit status messages, and multicasting. XLMI - The Extended LMI is a type of LMI which is implemented in an AR + PNNI network.
Main OID:
ciscoWanFeederMIB.1.3.6.1.4.1.351.150.15
26
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
ciscoWanFeederMIBThis MIB is used for configuring a port on an ATM switch module to be aware of feeder connection information. Terminology: AR - Auto Route, a CISCO proprietary feature, provides connection management for network with only CISCO nodes such as BPX or IGX. Feeder - An external ATM switch, which does not have PNNI feature, connected to an ATM switch that supports PNNI to provide LMI. LMI - Local Management Interface is an interface to provide a set of enhancements to Frame Relay specification for managing complex internetworks. LMI extensions include global addressing, virtual-circuit status messages, and multicasting. XLMI - The Extended LMI is a type of LMI which is implemented in an AR + PNNI network. MODULE-IDENTITY .1.3.6.1.4.1.351.150.15 |
cwfMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.15.1 |
cwfFeeder OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.15.1.1 |
cwfFeederTableThis table contains the entries for the feeders. It is used for addition or deletion of feeders and to support LMI on the feeders. The information in these entries are advertised to LMI using a system dependent implementation when an entry is created/activated. This table can also be applicable to XLMI. SEQUENCE OF CwfFeederEntry .1.3.6.1.4.1.351.150.15.1.1.1 |
cwfFeederEntryAn entry in cwfFeederTable. CwfFeederEntry .1.3.6.1.4.1.351.150.15.1.1.1.1 |
cwfFeederIfNumThis is an unique interface number of an ATM virtual interface. The value of this object is equal to the ifIndex of the ATM virtual interface interface identified by ifType atmVirtual(149). InterfaceIndex (IF-MIB) .1.3.6.1.4.1.351.150.15.1.1.1.1.1 |
cwfFeederNameThis is the name of the feeder. It contains a string of length zero, if the feeder name is not available.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.351.150.15.1.1.1.1.2 |
cwfLanIPThis is the LAN IP address of the feeder. This IP address is used for ethernet interface.ro IpAddress .1.3.6.1.4.1.351.150.15.1.1.1.1.3 |
cwfNetIPThis is the network IP address of the feeder. This IP address is used for ATM interface.ro IpAddress .1.3.6.1.4.1.351.150.15.1.1.1.1.4 |
cwfRemoteShelfThis is the remote shelf number of the feeder module.ro Integer32 .1.3.6.1.4.1.351.150.15.1.1.1.1.5 |
cwfRemoteSlotThis is the remote slot number of the feeder module.ro Integer32 .1.3.6.1.4.1.351.150.15.1.1.1.1.6 |
cwfRemotePortThis is the remote physical port(line) number of the feeder module.ro Integer32 .1.3.6.1.4.1.351.150.15.1.1.1.1.7 |
cwfFeederTypeThis identifies the feeeder type. fdrNON(12) is applicable when cwfLMIType is xLMI(2). Other values are applicable for cwfLMIType = feeder(1). The possible values are: fdrIPX -- Feeder is an IPX node in a routing network fdrBPX -- Feeder is an BPX node in a routing network fdrIpxAF -- Feeder is a stand-alone IPX node fdrBASIS -- Feeder is a stand-alone BASIS node fdrUNKNOWN -- Feeder is unknown fdrUNI -- Feeder is a UNI AIT (phase 0) fdrAPS -- Feeder is an APS (Adjunct Processor Shelf) fdrIGX -- Feeder is an IGX node in a routing network fdrIgxAF -- Feeder is a stand-alone IGX node fdrVSI -- Feeder is an VSI Controller fdrPAR -- Feeder is a PAR fdrNON -- Non-feeder typero Enumeration .1.3.6.1.4.1.351.150.15.1.1.1.1.8 |
cwfModelNumberThis identifies the feeder model number.ro Integer32 .1.3.6.1.4.1.351.150.15.1.1.1.1.9 |
cwfLMIAdminStatusThis provides the feeder LMI admin state configuration capabilities for the desired state of interface. The value of this object is ignored during row creation.rw Enumeration .1.3.6.1.4.1.351.150.15.1.1.1.1.10 |
cwfLMIOperStatusThis provides the operational state of the LMI connection.ro Enumeration .1.3.6.1.4.1.351.150.15.1.1.1.1.11 |
cwfFeederNodeAlarmThis identifies the feeder node alarm status. It provides the alarm status in hierarchical order where by if there are no feeder node alarms, it is signified by <clear>. If minor alarms, with no major alarms, it is signified by <minor>. If the node has one or more major alarms, irrespective of the minor alarm status, then it is signified by <major>.ro Enumeration .1.3.6.1.4.1.351.150.15.1.1.1.1.12 |
cwfFeederRowStatusThis is used for adding or deleting a feeder entry. The row can be created by setting this object to 'createAndGo(4)'. The row can be deleted by setting this object to 'destroy(6)'. No other values are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.351.150.15.1.1.1.1.13 |
cwfLMITypeThis identifies the LMI type. It identifies the type of network to which the LMI port is connected to.rw Enumeration .1.3.6.1.4.1.351.150.15.1.1.1.1.14 |
cwfMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.15.3 |
cwfMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.15.3.1 |
cwfMIBComplianceThe compliance statement for feeder group.deprecated Unknown .1.3.6.1.4.1.351.150.15.3.1.1 |
cwfMIBCompliance2The Compliance statement for feeder group. Unknown .1.3.6.1.4.1.351.150.15.3.1.2 |
cwfMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.15.3.2 |
cwfFeederGroupThe objects related to configuring a feeder.deprecated Unknown .1.3.6.1.4.1.351.150.15.3.2.1 |
cwfFeederGroup2The objects related to configuring feeder and non-feeder(XLMI). Unknown .1.3.6.1.4.1.351.150.15.3.2.2 |