CISCO-MGX82XX-RPM-RSRC-PART-MIB
The CISCO-MGX82XX-RPM-RSRC-PART-MIB manages resource partition configurations on Cisco MGX 82xx switch RPM subinterfaces, specifically monitoring and controlling VPI/VCI ranges, allocated bandwidth, and total connection entry limits.
Imported Objects
Objects
20 total| Object Name |
|---|
rpmIfCnfResPart OBJECT IDENTIFIER .1.3.6.1.4.1.351.110.5.2.9.2 |
rpmIfCnfRscPartTableThe table is for RPM interface resource partition. SEQUENCE OF RpmIfCnfRscPartEntry .1.3.6.1.4.1.351.110.5.2.9.2.1 |
rpmIfCnfRscPartEntryAn entry for resource partition configuration on a logical interface. A resource partition need to be configured before connections(or connection endpoints) can be added to the interface. RpmIfCnfRscPartEntry .1.3.6.1.4.1.351.110.5.2.9.2.1.1 |
rpmIfRscSlotNumThis object identifies the slot number of the RPM card in MGX shelf.ro Integer32 .1.3.6.1.4.1.351.110.5.2.9.2.1.1.1 |
rpmIfRscPartIfNumThis is backplane interface number. Currently there is only one interface and value 1 is the only value supported.ro Integer32 .1.3.6.1.4.1.351.110.5.2.9.2.1.1.2 |
rpmIfRscPartCtrlrNumThis object identifies the type of the controller which owns the resource partition. par(1) : Portable Auto Route Controller. This is a controller software implementing Cisco Proprietary protocol for network routing and topology. pnni(2): Private Network-to-Network Interface(PNNI) controller. This is a controller implementing ATM Forum PNNI protocol for routing. tag(3) : Tag Switching(MPLS) controller. This is a controller supporting MPLS protocol.ro Enumeration .1.3.6.1.4.1.351.110.5.2.9.2.1.1.3 |
rpmIfRscPrtRowStatusThis object contains the information on whether subinterface exists or being modified. add(1) : sub-interface exists del(2) : sub-interface deleted mod(2) : sub-interface being modifiedro Enumeration .1.3.6.1.4.1.351.110.5.2.9.2.1.1.4 |
rpmIfRscPrtIngrPctBandwidthThe percentage of logical interface bandwidth.ro Integer32 .1.3.6.1.4.1.351.110.5.2.9.2.1.1.5 |
rpmIfRscPrtEgrPctBandwidthThe percentage of logical interface bandwidth.ro Integer32 .1.3.6.1.4.1.351.110.5.2.9.2.1.1.6 |
rpmIfRscPrtVpiLowThe beginning of the VPI range reserved for this partition.ro Integer32 .1.3.6.1.4.1.351.110.5.2.9.2.1.1.7 |
rpmIfRscPrtVpiHighThe end of the VPI range reserved for this partition.ro Integer32 .1.3.6.1.4.1.351.110.5.2.9.2.1.1.8 |
rpmIfRscPrtVciLowThe beginning of the VCI range reserved for this partition. This field is only valid for logical interfaces configured with a single VPI.ro Integer32 .1.3.6.1.4.1.351.110.5.2.9.2.1.1.9 |
rpmIfRscPrtVciHighThe end of the VCI range reserved for this partition. This field is only valid for logical interfaces configured with a single VPI.ro Integer32 .1.3.6.1.4.1.351.110.5.2.9.2.1.1.10 |
rpmIfRscPrtMaxChansThis represents maximum number of channels(connections) that are available to the controller.ro Integer32 .1.3.6.1.4.1.351.110.5.2.9.2.1.1.11 |
ciscoMgx82xxRpmRsrcPartMIBThe MIB module to manage resource partition objects. A resource partition is configured on a RPM subinterface. An administrator can partition connection related resources like VPI, VCI ranges, bandwidth and total amount of available connection entries in the switch through these MIB tables. MODULE-IDENTITY .1.3.6.1.4.1.351.150.61 |
cmrRsrcPartMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.61.3 |
cmrRsrcPartMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.61.3.1 |
cmrRsrcPartMIBComplianceThe Compliance statement for Resource partition management group. Unknown .1.3.6.1.4.1.351.150.61.3.1.1 |
cmrRsrcPartMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.61.3.2 |
cmrRsrcPartMIBGroupThe collection of objects related to configuration of Resource partition. Unknown .1.3.6.1.4.1.351.150.61.3.2.1 |
More MIBs from Stratacom
Browse all StratacomMIBs →Standard SNMP MIB module defining data structures for CISCO-WAN-AXIPOP-MIB.
Standard SNMP MIB module defining data structures for STRATACOM-MIB.
The CISCO-WAN-SVC-MIB manages ATM service provisioning, configuration, and status monitoring on Cisco BPX-SES and MGX ATM switches, specifically tracking XPVC/XPVP segments, OAM cell handling, and ENNI auto-discovery via ILMI. It facilitates the administration of ATM traffic classes (CBR, VBR, UBR, ABR) and virtual circuit states (SVC, SPVC) across User-Network and Network-Network interfaces.
Standard SNMP MIB module defining data structures for CISCO-MGX82XX-SONET-MIB.
The CISCO-MGX82XX-DSX3-MIB enables configuration and monitoring of DS3/E3 interface parameters, including alarm states (AIS, LOF, RAI), performance statistics, and Bit Error Rate Testing (BERT) on Cisco MGX 8220/8230 T3/E3 service modules such as the CESM-T3E3 and FRSM-VHS. This module facilitates the management of physical layer convergence procedures (PLCP) and maintenance byte fields (Tx/Rx MA) defined by ITU-T G.832 for channelized T3 and E3 circuits.
The CISCO-WAN-PAR-MIB manages the Portable AutoRoute (PAR) controller on Cisco MGX and BPX switches to provision, monitor, and alarm connections while controlling LMI communication and clocking selection. It enables the configuration of routing capabilities, failure event conditioning, and the management of feeder-to-node signaling and switch synchronization.