CISCO-WAN-FR-CONN-CAPABILITY
The CISCO-WAN-FR-CONN-CAPABILITY MIB exposes agent capability objects for Cisco Frame Relay interfaces, specifically defining the supported connection states and parameters for the FRSM-12 hardware module. This module enables network management systems to verify the operational status and feature set of Frame Relay connections on Cisco WAN devices running IOS.
Imported Objects
Objects
2 total| Object Name |
|---|
ciscoWanFrConnCapabilityThe Agent Capabilities for Frame Relay connection mib objects. - The capability cwFrConnCapabilityFrsm12V3R00 is for FRSM-12 module. MODULE-IDENTITY .1.3.6.1.4.1.351.160.358 |
cwFrConnCapabilityFrsm12V3R00Frame Relay Connection Agent Capabilities for Frame Relay Service Module(FRSM-12). Unknown .1.3.6.1.4.1.351.160.358.1 |
More MIBs from Stratacom
Browse all StratacomMIBs →Standard SNMP MIB module defining data structures for CISCO-WAN-AXIPOP-MIB.
Standard SNMP MIB module defining data structures for STRATACOM-MIB.
The CISCO-WAN-SVC-MIB manages ATM service provisioning, configuration, and status monitoring on Cisco BPX-SES and MGX ATM switches, specifically tracking XPVC/XPVP segments, OAM cell handling, and ENNI auto-discovery via ILMI. It facilitates the administration of ATM traffic classes (CBR, VBR, UBR, ABR) and virtual circuit states (SVC, SPVC) across User-Network and Network-Network interfaces.
Standard SNMP MIB module defining data structures for CISCO-MGX82XX-SONET-MIB.
The CISCO-MGX82XX-DSX3-MIB enables configuration and monitoring of DS3/E3 interface parameters, including alarm states (AIS, LOF, RAI), performance statistics, and Bit Error Rate Testing (BERT) on Cisco MGX 8220/8230 T3/E3 service modules such as the CESM-T3E3 and FRSM-VHS. This module facilitates the management of physical layer convergence procedures (PLCP) and maintenance byte fields (Tx/Rx MA) defined by ITU-T G.832 for channelized T3 and E3 circuits.
The CISCO-WAN-PAR-MIB manages the Portable AutoRoute (PAR) controller on Cisco MGX and BPX switches to provision, monitor, and alarm connections while controlling LMI communication and clocking selection. It enables the configuration of routing capabilities, failure event conditioning, and the management of feeder-to-node signaling and switch synchronization.