BASIS-ONLINE-DIAG-MIB
The BASIS-ONLINE-DIAG-MIB facilitates the monitoring of real-time hardware and software diagnostic status for Cisco MGX 82xx series ATM switches, specifically exposing online test results, fault conditions, and component health metrics for the MGX8250, MGX8220, and MGX8230 platforms.
Imported Objects
Objects
10 total| Object Name |
|---|
onlineDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.351.110.6.3 |
diagTypeThis is used to identify the type of diagnostics. post (1) : Power On Self Test. onlineDiag(2) : Online Diagnostics. When a trap is sent to report diagnostics results this is used as a varbind to indicate the type of diagnostics.ro Enumeration .1.3.6.1.4.1.351.110.6.3.1 |
diagResultThis is used to indicate the result of the diagnostics.ro Enumeration .1.3.6.1.4.1.351.110.6.3.2 |
diagTestIdThis is used to indicate the test number of the diagnostics test that failed. The value depends upon the implementation in the each of the MGX82xx product.ro Integer32 .1.3.6.1.4.1.351.110.6.3.3 |
basisOnlineDiagMIBThis MIB contains information on the online diagnostics in MGX82xx(MGX8250, MGX8220, MGX8230 etc) products. MODULE-IDENTITY .1.3.6.1.4.1.351.150.80 |
boDiagMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.80.2 |
boDiagMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.80.2.1 |
boDiagComplianceThe compliance statement for entities which implement the basis online diagnostics MIB. Unknown .1.3.6.1.4.1.351.150.80.2.1.1 |
boDiagMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.80.2.2 |
boDiagGroupA collection of objects providing the online diagnostics information. Unknown .1.3.6.1.4.1.351.150.80.2.2.1 |
More MIBs from Stratacom
Browse all StratacomMIBs →Standard SNMP MIB module defining data structures for CISCO-WAN-AXIPOP-MIB.
Standard SNMP MIB module defining data structures for STRATACOM-MIB.
The CISCO-WAN-SVC-MIB manages ATM service provisioning, configuration, and status monitoring on Cisco BPX-SES and MGX ATM switches, specifically tracking XPVC/XPVP segments, OAM cell handling, and ENNI auto-discovery via ILMI. It facilitates the administration of ATM traffic classes (CBR, VBR, UBR, ABR) and virtual circuit states (SVC, SPVC) across User-Network and Network-Network interfaces.
Standard SNMP MIB module defining data structures for CISCO-MGX82XX-SONET-MIB.
The CISCO-MGX82XX-DSX3-MIB enables configuration and monitoring of DS3/E3 interface parameters, including alarm states (AIS, LOF, RAI), performance statistics, and Bit Error Rate Testing (BERT) on Cisco MGX 8220/8230 T3/E3 service modules such as the CESM-T3E3 and FRSM-VHS. This module facilitates the management of physical layer convergence procedures (PLCP) and maintenance byte fields (Tx/Rx MA) defined by ITU-T G.832 for channelized T3 and E3 circuits.
The CISCO-WAN-PAR-MIB manages the Portable AutoRoute (PAR) controller on Cisco MGX and BPX switches to provision, monitor, and alarm connections while controlling LMI communication and clocking selection. It enables the configuration of routing capabilities, failure event conditioning, and the management of feeder-to-node signaling and switch synchronization.