CISCO-MGX82XX-ATM-UNI-PORT-MIB
The CISCO-MGX82XX-ATM-UNI-PORT-MIB provides management objects for monitoring User Network Interface (UNI) port statistics and operational states on Cisco MGX8250 and MGX8220 ATM switches. It enables the tracking of ATM-specific performance metrics, including cell loss, cell delay, and interface error counters, for the user-side port interfaces.
Imported Objects
Objects
20 total| Object Name |
|---|
atmNetPrefixGroup OBJECT IDENTIFIER .1.3.6.1.4.1.351.110.1.4.1.1 |
atmNetPrefixTableA table implemented by the UNI Management Entity on the user-side of an ATM UNI port, containing the network-prefix(es) for ATM-layer addresses in effect on the user-side of the UNI. SEQUENCE OF AtmNetPrefixEntry .1.3.6.1.4.1.351.110.1.4.1.1.1 |
atmNetPrefixEntryAn entry in the table, containing information about the ATM Prefix status. AtmNetPrefixEntry .1.3.6.1.4.1.351.110.1.4.1.1.1.1 |
axisAtmNetPrefixPortThe unique value which identifies the ILMI port.ro Integer32 .1.3.6.1.4.1.351.110.1.4.1.1.1.1.1 |
axisAtmNetPrefixPrefixThe network prefix for ATM addresses which is in effect on the user-side of the ATM UNI port.ro NetPrefix .1.3.6.1.4.1.351.110.1.4.1.1.1.1.2 |
axisAtmNetPrefixAdminStatusAn indication of the validity of the network prefix for ATM addresses, on the user-side of the UNI port.rw Enumeration .1.3.6.1.4.1.351.110.1.4.1.1.1.1.3 |
axisAtmNetPrefixOperStatusAn indication of the current registration state for the prefix.ro Enumeration .1.3.6.1.4.1.351.110.1.4.1.1.1.1.4 |
atmAddressGroup OBJECT IDENTIFIER .1.3.6.1.4.1.351.110.1.4.1.2 |
atmAddressTableA table implemented by the network-side of an ATM UNI port, containing the ATM-layer addresses in effect on the user-side of the UNI. SEQUENCE OF AtmAddressEntry .1.3.6.1.4.1.351.110.1.4.1.2.1 |
atmAddressEntryInformation about a single ATM-layer address in effect on the user-side of a UNI port. AtmAddressEntry .1.3.6.1.4.1.351.110.1.4.1.2.1.1 |
axisAtmAddressPortA unique value which identifies this port. The value of 0 has the special meaning of identifying the local UNI.ro Integer32 .1.3.6.1.4.1.351.110.1.4.1.2.1.1.1 |
axisAtmAddressAtmAddressThe ATM address which is in effect on the user-side of the ATM UNI port.ro AtmAddress .1.3.6.1.4.1.351.110.1.4.1.2.1.1.2 |
axisAtmAddressStatusAn indication of the validity of the ATM address at the user-side of the UNI port.ro Enumeration .1.3.6.1.4.1.351.110.1.4.1.2.1.1.3 |
ciscoMgx82xxAtmUniPortMIBThe MIB module containing objects related to user-side of the ATM UNI Port. The mib is applicable for MGX8250 and MGX8220 products. Terminologies used: UNI : User Network Interface. MODULE-IDENTITY .1.3.6.1.4.1.351.150.71 |
cmauPortMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.71.2 |
cmauPortMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.71.2.1 |
cmauAtmAddressGroupThe collection of objects which are used to represent ATM Port information. Unknown .1.3.6.1.4.1.351.150.71.2.1.1 |
cmauNetPrefixGroupThe collection of objects related to ATM address prefix. Unknown .1.3.6.1.4.1.351.150.71.2.1.2 |
cmauPortMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.71.2.2 |
cmauPortComplianceThe compliance statement for objects related to ATM UNI ports. Unknown .1.3.6.1.4.1.351.150.71.2.2.1 |
More MIBs from Stratacom
Browse all StratacomMIBs →Standard SNMP MIB module defining data structures for CISCO-WAN-AXIPOP-MIB.
Standard SNMP MIB module defining data structures for STRATACOM-MIB.
The CISCO-WAN-SVC-MIB manages ATM service provisioning, configuration, and status monitoring on Cisco BPX-SES and MGX ATM switches, specifically tracking XPVC/XPVP segments, OAM cell handling, and ENNI auto-discovery via ILMI. It facilitates the administration of ATM traffic classes (CBR, VBR, UBR, ABR) and virtual circuit states (SVC, SPVC) across User-Network and Network-Network interfaces.
Standard SNMP MIB module defining data structures for CISCO-MGX82XX-SONET-MIB.
The CISCO-MGX82XX-DSX3-MIB enables configuration and monitoring of DS3/E3 interface parameters, including alarm states (AIS, LOF, RAI), performance statistics, and Bit Error Rate Testing (BERT) on Cisco MGX 8220/8230 T3/E3 service modules such as the CESM-T3E3 and FRSM-VHS. This module facilitates the management of physical layer convergence procedures (PLCP) and maintenance byte fields (Tx/Rx MA) defined by ITU-T G.832 for channelized T3 and E3 circuits.
The CISCO-WAN-PAR-MIB manages the Portable AutoRoute (PAR) controller on Cisco MGX and BPX switches to provision, monitor, and alarm connections while controlling LMI communication and clocking selection. It enables the configuration of routing capabilities, failure event conditioning, and the management of feeder-to-node signaling and switch synchronization.