Home/Catalog/CISCO-WAN-CES-CONN-STAT-MIB

CISCO-WAN-CES-CONN-STAT-MIB

AI MIB Summary

The CISCO-WAN-CES-CONN-STAT-MIB monitors Circuit Emulation Service Module (CESM) statistics on Cisco MGX82xx and MGX88xx platforms, specifically tracking channel and connection performance metrics for Circuit Emulation Service (CES) traffic. This module provides visibility into the operational state and counters of CES connections managed by the Processor Switch Service Module (PXM) controllers.

The MIB module to provide CES Connections statistics. This MIB is supported in Circuit Emulation Service Modules(CESM) in MGX82xx, MGX88xx products. The channels and connections are used interchangeably in this mib. Terminologies Used: PXM : Processor Switch Service Module. This is the controller card used in MGX switches. CESM : Circuit Emulation Service Module. The Card supporting Circuit Emulation Service.

Objects

Active

Status

Dependencies

Imported Objects

Objects

31 total

Object Name	Syntax	OID
cesmChanCntGrp OBJECT IDENTIFIER `.1.3.6.1.4.1.351.110.5.3.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.351.110.5.3.2.2`
cesmChanCntGrpTableThe statistics table for CES connections. For every entry in cesmChanCnfGrpTable, there will be an entry in this table. SEQUENCE OF CesmChanCntGrpEntry `.1.3.6.1.4.1.351.110.5.3.2.2.1`	SEQUENCE OF CesmChanCntGrpEntry	`.1.3.6.1.4.1.351.110.5.3.2.2.1`
cesmChanCntGrpEntryAn entry in the CES connection statistics table. CesmChanCntGrpEntry `.1.3.6.1.4.1.351.110.5.3.2.2.1.1`	CesmChanCntGrpEntry	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1`
cesCntChanNumThis object identifies the channel number of the CESM channel. The value for this object is same as the value specified in 'cesCnfChanNum'.ro INTEGER `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.1`	INTEGER	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.1`
cesChanStateThis object indicates the channel/connection status. The possible value(s) are : notConfigured (1) : Channel is not configured okay (2) : channel is ok alarm (3) : channel is in alarm. The connection segment is not broken. failed (4) : channel is failed. The connection segment is broken. This value is applicable when PXM running PNNI Control Software.ro Enumeration `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.2`	Enumeration	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.2`
cesXmtATMStateThis object indicates the transmit state of channel on the ATM side (towards the network). The possible value(s) are : other(1) : values other than mentioned below. normal(2) : Channel is ok. sendingAIS(3) : Sending AIS signal sendingFERF(4): Sending FERF.ro Enumeration `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.3`	Enumeration	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.3`
cesRcvATMStateThis variable indicates the receive state of channel on the ATM side (from the network). The possible value(s) are : other(1) : values other than mentioned below. normal(2) : Channel is ok. receivingAIS (3) : receiving AIS signal receivingFERF(4) : receiving FERF.ro Enumeration `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.4`	Enumeration	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.4`
cesCellLossStatusWhen cells are lost for the CellLossIntegrationPeriod the value is set to loss ( 2). when cells are no longer lost, the value is set to noLoss(1).ro Enumeration `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.5`	Enumeration	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.5`
cesReassCellsThe number of cells played out to T1/E1/T3E3 interface. It excludes cells that were discarded for any reason.ro Counter `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.6`	Counter	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.6`
cesGenCellsThe number of cells generated from T1/E1/T3E3 interface and sent towards network.ro Counter `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.7`	Counter	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.7`
cesHdrErrorsThe number of AAL-1 header errors detected and possibly corrected. Header errors include correctable and uncor- rectable CRC, plus bad parity.ro Counter `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.8`	Counter	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.8`
cesPointerReframesThe number of events in which the AAL1 reassembler found that an SDT pointer is not where it is expected and the and the pointer must be reacquired. Not supported in CESM-8P due to limitation in AAL1 SAR. Not applicable for CESM-4T1/E1 and CESM-T3/E3ro Counter `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.9`	Counter	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.9`
cesLostCellsThe number of cells lost in egress direction due to AAL 1 header errors and missing cells.ro Counter `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.10`	Counter	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.10`
cesBufUnderflowsThe number of buffer underflows in Egress direction Not supported in CESM-8P due limitation in AAL1 SAR.ro Counter `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.11`	Counter	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.11`
cesBufOverflowsThe number of buffer overflows in Egress direction Not supported in CESM-8P due to limitation in AAL1 SAR.ro Counter `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.12`	Counter	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.12`
cesIngrDiscardedBytesThe number of bytes discarded due to shelf alarm in ingress direction from port data. Not supported in CESM-8P.ro Counter `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.13`	Counter	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.13`
cesUflowInsCellsThe number of All 1's cells inserted in case of Egress Buffer Underflow Not supported in CESM-8P.ro Counter `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.14`	Counter	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.14`
cesOflowDropBytesThe number of bytes discarded in Egress direction because of Egress buffer overflow Not supported in CESM-8P.ro Counter `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.15`	Counter	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.15`
cesCellSeqMismatchCntThe number of times SAR received a valid out of sequence AAL-1 cell from CellBus.ro Counter `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.16`	Counter	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.16`
counterClrButtonThis object is used for clearing the counters in this table. If set to resetCounters(2), then counters will be cleared.rw Enumeration `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.17`	Enumeration	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.17`
cesChanSecUptimeThe number of seconds channel is in service This object is only applicable for CESM-8P.ro Counter `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.18`	Counter	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.18`
cesChanSignalingStatusThis variable indicates the connection signalling status Connection will be in Idle suppression mode if it in on-hook. Not applicable for T3E3 and CESM-4P.ro Enumeration `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.19`	Enumeration	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.19`
cesChanStatusBitMapThis variable indicates the consolidated bit map of the channel alarm state. Individual bit positions are as defined below. Bit position Fail/Alarm Reason 0 Alarm Reserved 1 Alarm n/w side AIS/RDI Rx 2 Fail Conditioned(A bit from n/w) 3 Alarm Reserved 4 Fail Reserved 5 Fail Reserved 6 Alarm Reserved 7 Alarm Cell loss alarm Fail bitmap mask : 0x34 Alarm bitmap mask: 0xCB This object is not applicable to MGX Release 1.x.ro INTEGER `.1.3.6.1.4.1.351.110.5.3.2.2.1.1.20`	INTEGER	`.1.3.6.1.4.1.351.110.5.3.2.2.1.1.20`
ciscoWanCesConnStatMIB OBJECT IDENTIFIER `.1.3.6.1.4.1.351.150.43`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.351.150.43`
RFC1155-SMI Unknown `.1.3.6.1.4.1.351.150.43`	Unknown	`.1.3.6.1.4.1.351.150.43`
cwcConnStatMIBConformance OBJECT IDENTIFIER `.1.3.6.1.4.1.351.150.43.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.351.150.43.2`
cwcConnStatMIBGroups OBJECT IDENTIFIER `.1.3.6.1.4.1.351.150.43.2.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.351.150.43.2.1`
cwcConnGenStatsGroup OBJECT IDENTIFIER `.1.3.6.1.4.1.351.150.43.2.1.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.351.150.43.2.1.1`
cwcConnStatsGroup OBJECT IDENTIFIER `.1.3.6.1.4.1.351.150.43.2.1.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.351.150.43.2.1.2`
cwcConnStatMIBCompliances OBJECT IDENTIFIER `.1.3.6.1.4.1.351.150.43.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.351.150.43.2.2`
cwcConnStatCompliance OBJECT IDENTIFIER `.1.3.6.1.4.1.351.150.43.2.2.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.351.150.43.2.2.1`