CISCO-VISM-PORT-MIB
AI MIB Summary
The CISCO-VISM-PORT-MIB provides granular monitoring and management of physical and logical port interfaces on Cisco VISM (Virtual Service Module) hardware, exposing operational status, traffic counters, and error statistics for service module ports. This module enables administrators to track interface state transitions, packet throughput, and link-level errors specific to the VISM service architecture.
The MIB module containing Port information for VISM service module.
Main OID:
ciscoVismPortMIB.1.3.6.1.4.1.351.150.92
16
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
16 total| Object Name |
|---|
vismPortCnfGrp OBJECT IDENTIFIER .1.3.6.1.4.1.351.110.5.5.2.1 |
vismPortCnfGrpTablePort configuration table for the virtual port. Only one entry is allowed in this table. SEQUENCE OF VismPortCnfGrpEntry .1.3.6.1.4.1.351.110.5.5.2.1.1 |
vismPortCnfGrpEntryAn entry for logical port. VismPortCnfGrpEntry .1.3.6.1.4.1.351.110.5.5.2.1.1.1 |
vismPortNumThis is a logical port number. If PXM1 (Processor Switch Module) is the PXM used on the shelf this object should be set to 1. For PXM1E this object should be set to 255.ro Integer32 .1.3.6.1.4.1.351.110.5.5.2.1.1.1.1 |
vismPortRowStatusThe object add, delete or modify a port. 'add' - add a port, a port acn only be added if the status is in 'del'. 'del' - delete a port, once a port is deleted the status is chane to 'del'. The port can only be deleted after deleting all the connections and the resource partition. 'mod' - modify a port and change status to 'mod'.rw Enumeration .1.3.6.1.4.1.351.110.5.5.2.1.1.1.2 |
vismPortLineNumThis represents the line number to which this port is associated. Since the network port is not associated with any line, line number 0 is returned on a GET.rw Integer32 .1.3.6.1.4.1.351.110.5.5.2.1.1.1.3 |
vismPortTypeThe value of this object is always set to 'voIP'. It indicates that network port. The same value is used even when VISM supports VoAAL1 or VoAAL2.rw Enumeration .1.3.6.1.4.1.351.110.5.5.2.1.1.1.4 |
vismPortDs0ConfigBitMapThis respesents the bit map of DS0s which is used to create this port. Bit 0 represents DS0-1. Since this object is not applicable to the network port, value 0 is returned on a GET.rw Integer32 (0..'ffffff'h) .1.3.6.1.4.1.351.110.5.5.2.1.1.1.5 |
vismPortSpeedThe speed of the port in cells per second. It is used by VISM card to advertise virtual port bandwidth to the controller, SVC(Switched Virtual Circuit) and PVC(Permanent Virtual Circuit) connection admission control and aggregate traffic clipping. This object can be modified only when there is no existing resource partition on the port.rw Integer32 .1.3.6.1.4.1.351.110.5.5.2.1.1.1.6 |
vismPortStateThis object indicates the state of the port.ro Enumeration .1.3.6.1.4.1.351.110.5.5.2.1.1.1.7 |
ciscoVismPortMIBThe MIB module containing Port information for VISM service module. MODULE-IDENTITY .1.3.6.1.4.1.351.150.92 |
ciscoVismPortMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.92.2 |
ciscoVismPortMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.92.2.1 |
ciscoVismPortGroupThe collection of objects which are used to represent VISM Port information. Unknown .1.3.6.1.4.1.351.150.92.2.1.1 |
ciscoVismPortMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.92.2.2 |
ciscoVismPortComplianceThe compliance statement for objects related to VISM Port module. Unknown .1.3.6.1.4.1.351.150.92.2.2.1 |