CISCO-MGX82XX-ENVMON-MIB
AI MIB Summary
The CISCO-MGX82XX-ENVMON-MIB provides SNMP-based monitoring of environmental telemetry, including temperature, voltage, and fan status, for Cisco MGX82xx series transport switches. This module enables network operators to detect hardware thermal and power anomalies to prevent service disruption on legacy SONET/SDH infrastructure.
The MIB module to describe the status of the Environmental Monitoring devices in MGX82xx products.
Main OID:
ciscoMgx82xxEnvmonMIB.1.3.6.1.4.1.351.150.70
20
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
20 total| Object Name |
|---|
asmAlarmTableThe ASM Alarm table. The table size is given by the value of ASMNumOfValidEntries. SEQUENCE OF AsmAlarmEntry .1.3.6.1.4.1.351.110.1.2.1 |
asmAlarmEntryAn entry in the Basis ASM Alarm Table. AsmAlarmEntry .1.3.6.1.4.1.351.110.1.2.1.1 |
asmAlarmNumThis object is the identifier of a ASM alarm entry. The Alarm is further identified by the objects ASMAlarmType & ASMAlarmUnitNum.ro Integer32 .1.3.6.1.4.1.351.110.1.2.1.1.1 |
asmAlarmTypeThe value for this object indicates the type of device for which alarm is applicable. The possible values are : alarmOther (1) : Other than specified below alarmTemperature(2) : Temperature sensor alarmPSU (3) : Power Supply Unit alarmDCLevel (4) : DC Level Sensor alarmFanUnit (5) : FAN speed sensor.ro Enumeration .1.3.6.1.4.1.351.110.1.2.1.1.2 |
asmAlarmUnitNumThis object identifies one unit among a number of identical units represented in this table having the same asmAlarmType.ro Integer32 .1.3.6.1.4.1.351.110.1.2.1.1.3 |
asmAlarmThresholdThis object specifies the threshold beyond which the alarmable unit is said to be in an abnormal state.ro Integer32 .1.3.6.1.4.1.351.110.1.2.1.1.4 |
asmAlarmSeverityThis variable specifies the severity of the alarm to be declared when the asmAlarmThreshold specified is exceeded.ro Enumeration .1.3.6.1.4.1.351.110.1.2.1.1.5 |
asmUnitMeasurableThis object indicates if the alarm unit is measurable by the switch/system.ro Enumeration .1.3.6.1.4.1.351.110.1.2.1.1.6 |
asmUnitMeasuredValueThis object gives the measured value of the entity addressed by asmAlarmNum. The value in this object is valid only if asmUnitMeasurable is set to 'yes'. This object contains value zero for asmUnitMeasurable value of 'no'.ro Integer32 .1.3.6.1.4.1.351.110.1.2.1.1.7 |
asmPhysicalAlarmStateThis object indicates the status of the ASM alarm represented in this entry. It is a bitmap where a set bit indicates an abnormal condition. A reset bit signifies normal operation.ro Integer32 .1.3.6.1.4.1.351.110.1.2.1.1.8 |
asmClrButtonThis object when set to asmAlarmClear(2),causes the alarm to be cleared.rw Enumeration .1.3.6.1.4.1.351.110.1.2.1.1.9 |
asmNumOfValidEntriesThe number of valid asmAlarmTable entries (regardless of how many are actually configured) in the table.ro Integer32 .1.3.6.1.4.1.351.110.1.2.2 |
asmShelfAlarmStateThis object indicates whether any Shelf/Node Alarm has been declared in the system.ro Enumeration .1.3.6.1.4.1.351.110.1.2.3 |
ciscoMgx82xxEnvmonMIBThe MIB module to describe the status of the Environmental Monitoring devices in MGX82xx products. MODULE-IDENTITY .1.3.6.1.4.1.351.150.70 |
cmEnvmonMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.70.2 |
cmEnvmonMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.70.2.1 |
cmEnvmonInfoGroupThe collection of objects which are used for providing information on environmental monitoring devices. Unknown .1.3.6.1.4.1.351.150.70.2.1.1 |
cmEnvmonGeneralGroupThe collection of objects which are used for providing information on shelf level objects related to environmental monitoring devices. Unknown .1.3.6.1.4.1.351.150.70.2.1.2 |
cmEnvmonMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.70.2.2 |
cmEnvmonComplianceThe compliance statement for objects related to MGX82xx Environmental monitoring MIB. Unknown .1.3.6.1.4.1.351.150.70.2.2.1 |