CISCO-WAN-TRAP-VARS-MIB
The CISCO-WAN-TRAP-VARS-MIB defines vendor-specific variable bindings exclusively for Cisco WAN device trap notifications, facilitating the transmission of critical WAN interface and protocol state changes to Network Management Systems without exposing these objects to standard SNMP GET or GET-NEXT queries.
Imported Objects
Objects
34 total| Object Name |
|---|
ciscoWanTrapVarsMIBThis MIB module is for Supporting Varbinds used only in trap defintions. The NMS applications should not depend on the implementation of these objects.The SNMP Requests(GET,GET-NEXT) may not be valid for these objects. MODULE-IDENTITY .1.3.6.1.4.1.351.150.5 |
cwTrapVarMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.5.1 |
cwTrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.5.1.1 |
cwTrapIndexThe object containing the value which can be used for indexing to any table.ro Integer32 .1.3.6.1.4.1.351.150.5.1.1.1 |
cwTrapSlotNumberThis object contains the slot number of the module.ro Integer32 .1.3.6.1.4.1.351.150.5.1.1.2 |
cwTrapPhysicalVendorTypeThis object contains the entPhysicalVendorType value for the physical entity.ro AutonomousType -- .1.3.6.1.4.1.351.150.5.1.1.3 |
cwTrapLineModuleNumberThis object contains the value for entPhysicalParentRelPos object for line modules.ro Integer32 .1.3.6.1.4.1.351.150.5.1.1.4 |
cwTrapOctetStringThis object contains the octet string value.ro OCTET STRING .1.3.6.1.4.1.351.150.5.1.1.5 |
cwTrapDisplayStringThis object contains the display string value.ro DisplayString -- .1.3.6.1.4.1.351.150.5.1.1.6 |
cwTrapPhysicalContainerThis object contains the container(parent unit number) number of an entity in entPhysicalTable. This object contains the value for the following entities: Fan Tray Power Supply Tray/Group. If it contains value zero, then this object is not applicable for the entity identified by cwTrapPhysicalUnit.ro INTEGER .1.3.6.1.4.1.351.150.5.1.1.7 |
cwTrapPhysicalUnitThis object contains the physical unit number(Relative Position) of the physical entity. The physical unit number depends upon the value specified in cwTrapPhysicalContainer object.ro INTEGER .1.3.6.1.4.1.351.150.5.1.1.8 |
cwTrapCardRoleThis object indicates the card role change to T1 from E1, or T3 from E3, vice versa. In case of a card with multiple roles, this object only indicates the changeable role swap between T1 and E1, or T3 and E3.ro Enumeration .1.3.6.1.4.1.351.150.5.1.1.9 |
cwTrapSctCardTypeThis object is used only for traps and represents the cwSctCardType object in CISCO-WAN-SCT-MGMT-MIB.my.ro Enumeration .1.3.6.1.4.1.351.150.5.1.1.10 |
cwTrapSctTypeThis object is used only for traps and represents the cwSctType object in CISCO-WAN-SCT-MGMT-MIB.my.ro Enumeration .1.3.6.1.4.1.351.150.5.1.1.11 |
cwTrapSctIdThis object is used only for traps and represents the cwSctId object in CISCO-WAN-SCT-MGMT-MIB.my.ro Unsigned32 .1.3.6.1.4.1.351.150.5.1.1.12 |
cwTrapSctMajorVersionThis object is used only for traps and represents the cwSctMajorVersion object in CISCO-WAN-SCT-MGMT-MIB.my.ro Unsigned32 .1.3.6.1.4.1.351.150.5.1.1.13 |
cwTrapVarLengthThis is an object used only for traps and contains a value for the length of another object. For instance, this can be the length of an address.ro Unsigned32 .1.3.6.1.4.1.351.150.5.1.1.14 |
cwTrapAtmAddressTypeThis object is used only for traps and represents the type of an ATM addresses.ro Enumeration .1.3.6.1.4.1.351.150.5.1.1.15 |
cwTrapReferenceThis object is used only for traps and represents an object of the same SYNTAX. This object is used in place of: a) 'cwapReference' in CISCO-WAN-ATM-PARTY-MIB.my.ro Integer32 .1.3.6.1.4.1.351.150.5.1.1.16 |
cwTrapSecondIndexThe object containing the value which can be used for indexing to any table.ro Integer32 .1.3.6.1.4.1.351.150.5.1.1.17 |
cwTrapThirdIndexThe object containing the value which can be used for indexing to any table.ro Integer32 .1.3.6.1.4.1.351.150.5.1.1.18 |
cwTrapVarsMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.5.2 |
cwTrapVarsMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.5.2.1 |
cwTrapVarsComplianceThe compliance statement for cwTrapVarsGroup.deprecated Unknown .1.3.6.1.4.1.351.150.5.2.1.1 |
cwTrapVarsCompliance2The compliance statement for cwTrapVarsGroup.deprecated Unknown .1.3.6.1.4.1.351.150.5.2.1.2 |
cwTrapVarsCompliance3The compliance statement for cwTrapVarsGroup.deprecated Unknown .1.3.6.1.4.1.351.150.5.2.1.3 |
cwTrapVarsCompliance4The compliance statement for cwTrapVarsGroup.deprecated Unknown .1.3.6.1.4.1.351.150.5.2.1.4 |
cwTrapVarsCompliance5The compliance statement for cwTrapVarsGroup. Unknown .1.3.6.1.4.1.351.150.5.2.1.5 |
cwTrapVarsMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.5.2.2 |
cwTrapVarsTrapGroupThe collection of objects which are used only in trap varbinds.deprecated Unknown .1.3.6.1.4.1.351.150.5.2.2.1 |
cwTrapVarsTrapGroup2The collection of objects which are used only in trap varbinds.deprecated Unknown .1.3.6.1.4.1.351.150.5.2.2.2 |
cwTrapVarsTrapGroup3The collection of objects which are used only in trap varbinds.deprecated Unknown .1.3.6.1.4.1.351.150.5.2.2.3 |
cwTrapVarsTrapGroup4The collection of objects which are used only in trap varbinds.deprecated Unknown .1.3.6.1.4.1.351.150.5.2.2.4 |
cwTrapVarsTrapGroup5The collection of objects which are used only in trap varbinds. Unknown .1.3.6.1.4.1.351.150.5.2.2.5 |
More MIBs from Stratacom
Browse all StratacomMIBs →Standard SNMP MIB module defining data structures for CISCO-WAN-AXIPOP-MIB.
Standard SNMP MIB module defining data structures for STRATACOM-MIB.
The CISCO-WAN-SVC-MIB manages ATM service provisioning, configuration, and status monitoring on Cisco BPX-SES and MGX ATM switches, specifically tracking XPVC/XPVP segments, OAM cell handling, and ENNI auto-discovery via ILMI. It facilitates the administration of ATM traffic classes (CBR, VBR, UBR, ABR) and virtual circuit states (SVC, SPVC) across User-Network and Network-Network interfaces.
Standard SNMP MIB module defining data structures for CISCO-MGX82XX-SONET-MIB.
The CISCO-MGX82XX-DSX3-MIB enables configuration and monitoring of DS3/E3 interface parameters, including alarm states (AIS, LOF, RAI), performance statistics, and Bit Error Rate Testing (BERT) on Cisco MGX 8220/8230 T3/E3 service modules such as the CESM-T3E3 and FRSM-VHS. This module facilitates the management of physical layer convergence procedures (PLCP) and maintenance byte fields (Tx/Rx MA) defined by ITU-T G.832 for channelized T3 and E3 circuits.
The CISCO-WAN-PAR-MIB manages the Portable AutoRoute (PAR) controller on Cisco MGX and BPX switches to provision, monitor, and alarm connections while controlling LMI communication and clocking selection. It enables the configuration of routing capabilities, failure event conditioning, and the management of feeder-to-node signaling and switch synchronization.