CISCO-WAN-VISM-MGC-REDUN-CAPABILITY
The CISCO-WAN-VISM-MGC-REDUN-CAPABILITY MIB module exposes agent capabilities for the Cisco WAN MGC Redundancy MIB, enabling the monitoring of redundancy states and failover readiness for Media Gateway Controller (MGC) sessions within Cisco VISM (Virtual Service Infrastructure) environments. This module specifically tracks the operational status and capability flags required to manage high-availability configurations for voice and media gateways.
Imported Objects
Objects
2 total| Object Name |
|---|
ciscoWanVismMgcRedunCapabilityThe Agent Capabilities for CISCO-WAN-MGC-REDUN-MIB MODULE-IDENTITY .1.3.6.1.4.1.351.160.338 |
ciscoWanVismMgcRedunCapV2R00CISCO-WAN-VISM-MGC-REDUN-MIB capabilities Unknown .1.3.6.1.4.1.351.160.338.1 |
More MIBs from Stratacom
Browse all StratacomMIBs →Standard SNMP MIB module defining data structures for CISCO-WAN-AXIPOP-MIB.
Standard SNMP MIB module defining data structures for STRATACOM-MIB.
The CISCO-WAN-SVC-MIB manages ATM service provisioning, configuration, and status monitoring on Cisco BPX-SES and MGX ATM switches, specifically tracking XPVC/XPVP segments, OAM cell handling, and ENNI auto-discovery via ILMI. It facilitates the administration of ATM traffic classes (CBR, VBR, UBR, ABR) and virtual circuit states (SVC, SPVC) across User-Network and Network-Network interfaces.
Standard SNMP MIB module defining data structures for CISCO-MGX82XX-SONET-MIB.
The CISCO-MGX82XX-DSX3-MIB enables configuration and monitoring of DS3/E3 interface parameters, including alarm states (AIS, LOF, RAI), performance statistics, and Bit Error Rate Testing (BERT) on Cisco MGX 8220/8230 T3/E3 service modules such as the CESM-T3E3 and FRSM-VHS. This module facilitates the management of physical layer convergence procedures (PLCP) and maintenance byte fields (Tx/Rx MA) defined by ITU-T G.832 for channelized T3 and E3 circuits.
The CISCO-WAN-PAR-MIB manages the Portable AutoRoute (PAR) controller on Cisco MGX and BPX switches to provision, monitor, and alarm connections while controlling LMI communication and clocking selection. It enables the configuration of routing capabilities, failure event conditioning, and the management of feeder-to-node signaling and switch synchronization.