CISCO-VISM-RSRC-PART-MIB
The CISCO-VISM-RSRC-PART-MIB monitors and manages port resource partition allocations and utilization statistics for the Cisco VISM (Virtual Service Module) service module. It provides granular visibility into the segmentation of physical port resources, enabling administrators to track partition status, capacity, and traffic distribution across virtual service instances.
Imported Objects
Objects
18 total| Object Name |
|---|
vismPortResPartCnfGrp OBJECT IDENTIFIER .1.3.6.1.4.1.351.110.5.5.2.2 |
vismPortResPartCnfGrpTableThe vismPortResPartCnfGrpTable contains the configuration of port resource partition. Currently this table contains a single row. SEQUENCE OF VismPortResPartCnfGrpEntry .1.3.6.1.4.1.351.110.5.5.2.2.1 |
vismPortResPartCnfGrpEntryAn entry for port resource partition. VismPortResPartCnfGrpEntry .1.3.6.1.4.1.351.110.5.5.2.2.1.1 |
vismResPartPortNumThis is the index to vismPortResPartCnfGrpTable. If PXM1(Processor Switch Module) is used on the shelf this object should be set to 1. For PXM1E this object should be set to 255.ro Integer32 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.1 |
vismResPartCtrlrNumThis is index to vismPortResPartCnfGrpTable.ro Enumeration .1.3.6.1.4.1.351.110.5.5.2.2.1.1.2 |
vismResPartRowStatusThis will 'add', 'delete' or 'modify' the partition. To delete an entry, this object has to be set to 'del'. The resource partition can be deleted only after deleting all the connections Logical Channel Numbers(LCNs).rw Enumeration .1.3.6.1.4.1.351.110.5.5.2.2.1.1.3 |
vismResPartNumOfLcnAvailThis represents number of LCNs available for this controller and this port. The default value for this object is chosen based on the object vismMode (defined in CISCO-VISM-MODULE-MIB MIB) :rw Integer32 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.4 |
vismResPartLcnLowThis represents low end of reserved LCN. The LCN identifies the local VCI(Virtual Channel Identifier) value on the VISM when adding a connection.rw Integer32 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.5 |
vismResPartLcnHighThis represents high end of reserved LCN. The LCN identifies the local VCI value on the VISM when adding a connection.rw Integer32 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.6 |
vismResPartIngrPctBWThe percentage of total ingress bandwidth reserved. Since we have only one LCN for VoIP(Voice Over IP), the value is 100.rw Integer32 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.7 |
vismResPartEgrPctBWThe percentage of total egress bandwidth reserved Since we have only one LCN for VoIP, the value is 100.rw Integer32 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.8 |
vismResPartCtrlrIDThis is the controller identifier of the PNNI (Private Network to Network Interface) controller.rw Integer32 .1.3.6.1.4.1.351.110.5.5.2.2.1.1.9 |
ciscoVismRsrcPartMIBThe MIB module containing Port Resource Partition information for VISM service module. MODULE-IDENTITY .1.3.6.1.4.1.351.150.93 |
ciscoVismRsrcPartMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.93.2 |
ciscoVismRsrcPartMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.93.2.1 |
ciscoVismRsrcPartGroupThe collection of objects which are used to represent VISM Port Resource Partition configuration. Unknown .1.3.6.1.4.1.351.150.93.2.1.1 |
ciscoVismRsrcPartMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.93.2.2 |
ciscoVismRsrcPartComplianceThe compliance statement for objects related to VISM Port Resource Partition configuration. Unknown .1.3.6.1.4.1.351.150.93.2.2.1 |
More MIBs from Stratacom
Browse all StratacomMIBs →Standard SNMP MIB module defining data structures for CISCO-WAN-AXIPOP-MIB.
Standard SNMP MIB module defining data structures for STRATACOM-MIB.
The CISCO-WAN-SVC-MIB manages ATM service provisioning, configuration, and status monitoring on Cisco BPX-SES and MGX ATM switches, specifically tracking XPVC/XPVP segments, OAM cell handling, and ENNI auto-discovery via ILMI. It facilitates the administration of ATM traffic classes (CBR, VBR, UBR, ABR) and virtual circuit states (SVC, SPVC) across User-Network and Network-Network interfaces.
Standard SNMP MIB module defining data structures for CISCO-MGX82XX-SONET-MIB.
The CISCO-MGX82XX-DSX3-MIB enables configuration and monitoring of DS3/E3 interface parameters, including alarm states (AIS, LOF, RAI), performance statistics, and Bit Error Rate Testing (BERT) on Cisco MGX 8220/8230 T3/E3 service modules such as the CESM-T3E3 and FRSM-VHS. This module facilitates the management of physical layer convergence procedures (PLCP) and maintenance byte fields (Tx/Rx MA) defined by ITU-T G.832 for channelized T3 and E3 circuits.
The CISCO-WAN-PAR-MIB manages the Portable AutoRoute (PAR) controller on Cisco MGX and BPX switches to provision, monitor, and alarm connections while controlling LMI communication and clocking selection. It enables the configuration of routing capabilities, failure event conditioning, and the management of feeder-to-node signaling and switch synchronization.