CISCO-WAN-CES-RSRC-PART-MIB
The CISCO-WAN-CES-RSRC-PART-MIB manages resource partitioning configurations on Cisco service modules supporting Circuit Emulation Service (CES) to allocate bandwidth and time slots for T1/E1 circuit emulation traffic. This module enables the definition and control of logical resource segments on CES ports, ensuring deterministic performance for legacy circuit traffic over packet-switched networks.
Imported Objects
Objects
18 total| Object Name |
|---|
cesmPortCnfResPartGrp OBJECT IDENTIFIER .1.3.6.1.4.1.351.110.5.3.1.2 |
cesmPortCnfResPartGrpTableThis table is for configuring the resource partition parameters. SEQUENCE OF CesmPortCnfResPartGrpEntry .1.3.6.1.4.1.351.110.5.3.1.2.1 |
cesmPortCnfResPartGrpEntryAn entry for a resource partition. A resource partition have to be created before connections can be added to the logical ports. CesmPortCnfResPartGrpEntry .1.3.6.1.4.1.351.110.5.3.1.2.1.1 |
cesmResPartPortNumThe value of this object identifies the CES port. The value of this object must be same as the value of 'cesPortNum' from cesmPortCnfGrpTable.ro Integer32 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.1 |
cesmResPartCtrlrNumThis object identifies the controller which can be used for accessing the resources. The possible values are : par(1) : Portable Auto Route controller. : This value is applicable in Release 1.x. pnni(2): PNNI Controller. : This value is applicable in Release 2.x. tag(3) : MPLS(Formerly known as Tag Switch)Controllerro Enumeration .1.3.6.1.4.1.351.110.5.3.1.2.1.1.2 |
cesmResPartRowStatusThis object is used for adding/deleting/modifying resource partition on a CES port. In MGX Release 1.x: To add an entry, this object should be set to add(1), value for other objects should not be specified. In MGX Release 2.x: To add an entry, this object should be set to add(1). To delete an entry, this object has to be set to del(2). The resource partition can be deleted only after deleting all the connections (LCNs).rw Enumeration .1.3.6.1.4.1.351.110.5.3.1.2.1.1.3 |
cesmResPartNumOfLcnAvailThis represents number of LCNs available for this controller and this port. In CESM-T3/E3 and 8-T1/E1,this value is 1.rw Integer32 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.4 |
cesmResPartLcnLowThis represents low end of reserved LCN In CESM-8T1/E1 and T3/E3, this refers to the logical port.rw Integer32 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.5 |
cesmResPartLcnHighThis represents high end of reserved LCN In CESM-8T1/E1 and T3/E3, this refers to the logical port.rw Integer32 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.6 |
cesmResPartIngrPctBWThe percentage of total ingress bandwidth reserved. In CESM-8T1/E1 and T3/E3, as there is only one LCN per port and it could be used by only one controller,this value is 100% for that controller.rw Integer32 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.7 |
cesmResPartEgrPctBWThe percentage of total egress bandwidth reserved In CESM-8T1/E1 and T3/E3, as there is only one LCN per port and it could be used by only one controller,this value is 100% for that controller.rw Integer32 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.8 |
cesmResPartCtrlrIDThis is the controller identifier for the resource patition. The default value is set for PNNI controller.rw Integer32 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.9 |
ciscoWanCesRsrcPartMIBThe mib module to configure the resource partition on Circuit Emulation Service(CES) ports. This is applicable for service modules providing the Circuit Emulation Services. MODULE-IDENTITY .1.3.6.1.4.1.351.150.41 |
cwcRsrcPartMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.41.2 |
cwcRsrcPartMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.41.2.1 |
ciscoWanCesRsrcPartComplianceThe compliance statement for entities which implement the Broad band Interface Resource Partition MIB. Unknown .1.3.6.1.4.1.351.150.41.2.1.1 |
cwcRsrcPartMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.351.150.41.2.2 |
ciscoWanCesRsrcPartGroupA collection of objects providing the resource partition configuration on CES ports. Unknown .1.3.6.1.4.1.351.150.41.2.2.1 |
More MIBs from Stratacom
Browse all StratacomMIBs →Standard SNMP MIB module defining data structures for CISCO-WAN-AXIPOP-MIB.
Standard SNMP MIB module defining data structures for STRATACOM-MIB.
The CISCO-WAN-SVC-MIB manages ATM service provisioning, configuration, and status monitoring on Cisco BPX-SES and MGX ATM switches, specifically tracking XPVC/XPVP segments, OAM cell handling, and ENNI auto-discovery via ILMI. It facilitates the administration of ATM traffic classes (CBR, VBR, UBR, ABR) and virtual circuit states (SVC, SPVC) across User-Network and Network-Network interfaces.
Standard SNMP MIB module defining data structures for CISCO-MGX82XX-SONET-MIB.
The CISCO-MGX82XX-DSX3-MIB enables configuration and monitoring of DS3/E3 interface parameters, including alarm states (AIS, LOF, RAI), performance statistics, and Bit Error Rate Testing (BERT) on Cisco MGX 8220/8230 T3/E3 service modules such as the CESM-T3E3 and FRSM-VHS. This module facilitates the management of physical layer convergence procedures (PLCP) and maintenance byte fields (Tx/Rx MA) defined by ITU-T G.832 for channelized T3 and E3 circuits.
The CISCO-WAN-PAR-MIB manages the Portable AutoRoute (PAR) controller on Cisco MGX and BPX switches to provision, monitor, and alarm connections while controlling LMI communication and clocking selection. It enables the configuration of routing capabilities, failure event conditioning, and the management of feeder-to-node signaling and switch synchronization.