CISCO-WAN-VISM-AAL2-PROFILES-CAPABILITY
The CISCO-WAN-VISM-AAL2-PROFILES-CAPABILITY module defines the agent capabilities for monitoring and managing ATM Adaptation Layer 2 (AAL2) profile parameters, including traffic contracts and QoS settings, on Cisco WAN Virtual Interface Switching (VISM) platforms. It enables the retrieval of supported profile attributes and configuration constraints for AAL2 virtual circuits to ensure proper service provisioning and fault isolation in ATM-based WAN environments.
Imported Objects
Objects
2 total| Object Name |
|---|
ciscoWanVismAal2ProfilesCapabilityThe Agent Capabilities for CISCO-WAN-AAL2-PROFILES-MIB. MODULE-IDENTITY .1.3.6.1.4.1.351.160.334 |
ciscoWanVismAal2ProfilesCapabilityV2R00CISCO-WAN-AAL2-PROFILES-MIB Capabilities Unknown .1.3.6.1.4.1.351.160.334.1 |
More MIBs from Stratacom
Browse all StratacomMIBs →Standard SNMP MIB module defining data structures for CISCO-WAN-AXIPOP-MIB.
Standard SNMP MIB module defining data structures for STRATACOM-MIB.
The CISCO-WAN-SVC-MIB manages ATM service provisioning, configuration, and status monitoring on Cisco BPX-SES and MGX ATM switches, specifically tracking XPVC/XPVP segments, OAM cell handling, and ENNI auto-discovery via ILMI. It facilitates the administration of ATM traffic classes (CBR, VBR, UBR, ABR) and virtual circuit states (SVC, SPVC) across User-Network and Network-Network interfaces.
Standard SNMP MIB module defining data structures for CISCO-MGX82XX-SONET-MIB.
The CISCO-MGX82XX-DSX3-MIB enables configuration and monitoring of DS3/E3 interface parameters, including alarm states (AIS, LOF, RAI), performance statistics, and Bit Error Rate Testing (BERT) on Cisco MGX 8220/8230 T3/E3 service modules such as the CESM-T3E3 and FRSM-VHS. This module facilitates the management of physical layer convergence procedures (PLCP) and maintenance byte fields (Tx/Rx MA) defined by ITU-T G.832 for channelized T3 and E3 circuits.
The CISCO-WAN-PAR-MIB manages the Portable AutoRoute (PAR) controller on Cisco MGX and BPX switches to provision, monitor, and alarm connections while controlling LMI communication and clocking selection. It enables the configuration of routing capabilities, failure event conditioning, and the management of feeder-to-node signaling and switch synchronization.