MIB Catalog

MIB module

Agent capabilities for CISCO-IPSEC-PROVISIONING-MIB

IPSec is the next-generation network layer crypto framework described in RFC2401-2411. This MIB defines the IPsec configurations. It may be used to view and provision IPsec

Agent capabilities for CISCO-IPSEC-SIGNALING-MIB

This MIB Module models status, performance and failures of a protocol with the generic characteristics of signalling protocols used with IPsec and FC-SP protocols. Examples of such pro

This MIB module defines the textual conventions used in the IPsec suite of MIBs. This includes Internet DOI numbers defined in RFC 2407, ISAKMP numbers defined in R

This module defines the MIB for IP SLA Automation. IP SLA Automation consists of the following: 1. Use of grouping - Group is an aggregation of operations sharing the sa

This MIB module defines the templates for IP SLA operations of ICMP echo, UDP echo and TCP connect. The ICMP echo operation measures end-to-end response time between a Ci

Agent capabilities for CISCO-IPSLA-ETHERNET-MIB

This MIB module consists of two parts. 1) Auto-Ethernet-CFM Control: | | 2) ethernetJitter Stats: | | The first part defines a

This MIB module defines templates for IP SLA operations of UDP Jitter and ICMP Jitter. The UDP Jitter operation is designed to measure the delay variance and packet loss

This MIB contains textual conventions used by CISCO IPSLA MIBs. Acronyms: FEC: Forward Equivalence Class LPD: Label Path Discovery

IP SLA is a capability which utilizes active monitoring for network performance. It can be used for network troubleshooting, network assessment and health monitoring.

Agent capabilities for CISCO-IPSLA-VIDEO-PROFILE-MIB

IP SLA is a capability which utilizes active monitoring for network performance. It can be used for network troubleshooting, network assessment and health monitoring.

The capabilities description of RFC 2465 Based IPV6-MIB.

The capabilities description of IPV6-MLD-MIB.

MIB module for monitoring and configuring iSCSI gateway functions. An iSCSI gateway represents FC (Fibre Channel) targets/initiators as iSCSI targ

The iSCSI Protocol MIB module.

The MIB module to describe the status of the ISDN Interfaces on the routers.

ISDN BRI integrated U Interface MIB module. This MIB manages the ISDN BRI integrated U Interface in the router.

MIB module for monitoring and configuring Internet Storage Name Service (iSNS) client.

MIB module

Agent capabilities for the CISCO-ITP-ACL-MIB.

The MIB for managing access lists that control messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point.

Agent capabilities for the CISCO-ITP-ACT-MIB.

The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. This information can b

The MIB for providing information about Distributed Short Message Routing for Short Message Service Center. This MIB will provide information used to control and measure

The MIB for providing information about Distributed Short Message Routing delivery using Short Message Peer-to-Peer protocol.

The MIB for providing information about Distributed Short Message Routing delivery using Universal Computer Protocol.

Agent capabilities for the CISCO-ITP-GACT-MIB.

The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. This information can b

Agent capabilities for the CISCO-ITP-GRT-MIB.

This MIB is for managing information required to route messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point.

Agent capabilities for the CISCO-ITP-GSCCP-MIB.

The MIB for signalling Connection Control Part(SCCP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point. This MIB provide

Agent capabilities for the CISCO-ITP-GSP-MIB.

The MIB for managing Signalling Points and its associated messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point. This MIB replaces t

Agent capabilities for the CISCO-ITP-GSP2-MIB.

The MIB for providing information specified in ITU Q752 Monitoring and Measurements for signalling System No. 7(SS7) Network. This information can be used to manage message

The MIB for Transaction Capabilities(TCAP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point.

Agent capabilities for the CISCO-ITP-MLR-MIB.

The MIB for providing information about Multi-layer Routing(MLR). This MIB will provide information used to control and measure SS7 messages signalling units i

Agent capabilities for the CISCO-ITP-MONITOR-MIB.

The MIB for providing information related to monitoring SS7 links. This information can be used to manage the state of software u

Agent capabilities for the CISCO-ITP-MSU-RATES-MIB.

This MIB provides information used to manage the number of MTP3 MSUs transmitted and received per processor. Many of the higher level protocols require several MSUs per tr

Agent capabilities for the CISCO-ITP-RT-MIB.

This MIB is for managing information required to route messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point.

Agent capabilities for the CISCO-ITP-SCCP-MIB.

The MIB for Signaling Connection Control Part(SCCP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point.

Agent capabilities for the CISCO-ITP-SP-MIB.

The MIB for managing Signalling Points and its associated messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Po

Agent capabilities for the CISCO-ITP-SP2-MIB.

The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signaling System No. 7(SS7) Network. This information can be

The defines textual conventions used by to manage devices related to the SS7 network. The relevant ITU documents describing this technology is the I

Agent capabilities for the CISCO-ITP-XUA-MIB.

The MIB for MTP3 User Adaptation (M3UA) and SCCP User Adaptation (SUA) for Cisco's IP Transfer Point (ITP) implementation. The Cisco IP Transfer Point (ITP) is a hardware

Agent capabilities for CISCO-IVR-MIB

The MIB module for the management of Inter-VSAN routing within the framework of Cisco's Inter-VSAN Routing (IVR) Architecture. IVR allows traffic

Agent capabilities for Job-Monitoring-MIB

The Agent capabilities for CISCO-L2-CONTROL-MIB.

The CISCO-L2-CONTROL-MIB is used to control some layer 2 functions, including MAC limit function and unicast flooding. This device could be a router or a switch.

This MIB module is for monitoring of active layer 2 devices by hot standby layer 2 devices and the configuration of hot standby switch-over paramet

The capabilities description of CISCO-L2-TUNNEL-CONFIG-MIB.

This MIB module is for layer 2 tunneling related configurations on a device. Tunneling allows separate local networks to be considered as a single VLAN. These separate net

The agent capabilities description of CISCO-L2L3-INTERFACE-CONFIG-MIB.

Interface switchport mode configuration management MIB. This MIB is used to monitor and control configuration of interface switchport and routed mode.

Network Address Translation (NAT) involves translating the source and or destination IP addresses of packets as they traverse from one IP domain to another. NAT is usually p

The capabilities description for CISCO-L4L7MODULE-REDUNDANCY-MIB.

The L4-7 SLB devices are used for scaling websites, building web enabled applications, and migrating to web services. The following services ( but not limited to )

The capabilities description for CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.

The MIB module for managing resource classes and configuring limits(max/min) to different resources. The resource referenced in this MIB are in addition to res

The capabilities description of CISCO-LAG-MIB.

Cisco Link Aggregation module for managing IEEE Std 802.3ad. This MIB provides Link Aggregation information that are either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB)

The MIB module for the managment of Cisco Latitude MeetingPlace conferencing solution. MeetignPlace MIB traps are generated under the following conditions. - T1 status - Gateway System Integrity - Maj

This MIB module is a Cisco extension to the ATM Forum's LANE Client MIB. This extension identifies those VCCs which are being used to carry packets

This MIB module is a Cisco extension to the ATM Forum's LANE Client MIB.

The MIB module for the management of LANE Configuration in Cisco devices.

MIB module

The MIB module for managing licenses on the system. The licensing mechanism provides flexibility to enforce licensing for various features in the system. The following tex

The capabilities description of CISCO-LICENSE-MGR-MIB.

The MIB module for a method of managing license files on the system. Licensing mechanism provides more flexibility in supporting various features in the system. Featur

This MIB module provides objects to view the features and services that are licensed to run on a system (usually a network entity), and an inventory of the licenses for t

This MIB module describes the capability of CISCO-LINK-ERROR-MONITOR-MIB.

The MIB module for managing Link Error Monitoring Feature on devices. Link Error Monitoring Feature provides a mechanism to monitor a certain set

This MIB is an extension to the IETF LISP-MIB module defined in RFC 7052. It contains Cisco defined managed objects and traps to support monitoring devices that support the Locator/

Cisco LiveData is the next generation reporting product for Cisco Unified Contact Center Enterprise (CCE). Cisco LiveData provides a horizontally scalable, highly available

This is the Agent Capabilities definition for LLDP-EXT-MED-MIB'

This MIB module defines objects describing users authenticated locally by a Network Access Server (NAS). ++ ++ +-+ | | | | |

The MIB module to view information about LocalDirector. The Cisco LocalDirector is a device designed for the purpose of load balancing TCP traffic

The MIB module for Local Packet Transport Services(LPTS) related information like the flows and the policer values related to various flows present in the system.

The MIB module for the Cisco Long Reach Ethernet Customer Premise Equipment device information. *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS *** CPE - Customer Premise E

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC), that terminate the Light Weight Access Point Protocol tunnel from Cisco Li

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-wei

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-wei

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-w

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-wei

Agent capabilities for CISCO-LWAPP-CLIENT-ROAMING-MIB.

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-w

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-wei

This MIB is used to manage Dynamic Host Configuration Protocol (DHCP) related information on the devices operating as Central controllers, that terminate the Light Weight

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol

Agent capabilities for CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB.

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-w

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-w

This module defines the textual conventions used throughout the Cisco enterprise MIBs designed for implementation on Central Controllers (CC) that terminate the Light Weight

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-wei

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-w

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-w

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-w

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-w

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol t

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel fr

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol t

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Cisco Li

This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel fr

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol t