CISCO-IPSLA-VIDEO-PROFILE-MIB
AI MIB Summary
The CISCO-IPSLA-VIDEO-PROFILE-MIB defines the configuration table for synthetic video traffic profiles used by Cisco IOS IP SLA video operations to actively monitor network performance. It enables the management of parameters such as source/destination addresses, ports, and DSCP values to generate and schedule synthetic video streams for measuring round-trip time and video-specific quality metrics.
IP SLA is a capability which utilizes active monitoring for network performance. It can be used for network troubleshooting, network assessment and health monitoring.
This MIB defines the following table as the collection of IP SLA video traffic profiles that are used when generating synthetic video traffic by configured IP SLA video operations.
cipslaVideoProfileTable
To run an IP SLA Video Operation, the MIB user should do the following configurations:
1. Create a new or reuse the existing rttMonEchoAdminEntry with
valid rttMonEchoAdminProtocol, rttMonEchoAdminTargetAddress, rttMonEchoAdminTargetPort, rttMonEchoAdminSourceAddress, rttMonEchoAdminSourcePort, rttMonEchoAdminVideoTrafficProfile, rttMonEchoAdminDscp, rttMonEchoAdminReserveDsp, rttMonEchoAdminInputInterface, and other applicable objects (if any) in rttMonEchoAdminTable of CISCO-RTTMON-MIB.
2. Schedule the operation to run immediately or at some
scheduled time(s) with optional recurrence(s) if desirable, by configuring with rttMonCtrlAdminTable of CISCO-RTTMON-MIB.
3. Each occurrance of the scheduled operation generates a report
for the IP SLA VO statistics which are populated and available in cipslaLatestVideoStatsTable and cipslaVideoAggStatsTable of CISCO-IPSLA-VIDEO-MIB.
Glossary:
IP SLA - Cisco IOS IP Service Level Agreements IP SLA operation - Refers to the 'video' operation supported by IP SLA. RTT - Round Trip Time
Main OID:
ciscoIpslaVideoProfileMIB.1.3.6.1.4.1.9.9.766
27
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
ciscoIpslaVideoProfileMIBIP SLA is a capability which utilizes active monitoring for
network performance. It can be used for network
troubleshooting, network assessment and health
monitoring.
This MIB defines the following table as the collection of IP
SLA video traffic profiles that are used when generating
synthetic video traffic by configured IP SLA video operations.
cipslaVideoProfileTable
To run an IP SLA Video Operation, the MIB user should do the
following configurations:
1. Create a new or reuse the existing rttMonEchoAdminEntry with
valid rttMonEchoAdminProtocol, rttMonEchoAdminTargetAddress,
rttMonEchoAdminTargetPort, rttMonEchoAdminSourceAddress,
rttMonEchoAdminSourcePort, rttMonEchoAdminVideoTrafficProfile,
rttMonEchoAdminDscp, rttMonEchoAdminReserveDsp,
rttMonEchoAdminInputInterface, and other applicable objects (if
any) in rttMonEchoAdminTable of CISCO-RTTMON-MIB.
2. Schedule the operation to run immediately or at some
scheduled time(s) with optional recurrence(s) if desirable, by
configuring with rttMonCtrlAdminTable of CISCO-RTTMON-MIB.
3. Each occurrance of the scheduled operation generates a report
for the IP SLA VO statistics which are populated and available
in cipslaLatestVideoStatsTable and cipslaVideoAggStatsTable of
CISCO-IPSLA-VIDEO-MIB.
Glossary:
IP SLA - Cisco IOS IP Service Level Agreements
IP SLA operation - Refers to the 'video'
operation supported by IP SLA.
RTT - Round Trip Time MODULE-IDENTITY .1.3.6.1.4.1.9.9.766 |
ciscoIpslaVideoProfileMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.766.0 |
ciscoIpslaVideoProfileMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.766.1 |
cipslaVideoProfile OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.766.1.1 |
cipslaVideoProfileTableThis table lists the definitions of IP SLA video profiles
that contain descriptive parameters for synthetic video traffic
patterns which can be used when generating synthetic video
packets by IP SLA Video Operation. SEQUENCE OF CipslaVideoProfileEntry .1.3.6.1.4.1.9.9.766.1.1.1 |
cipslaVideoProfileEntryA conceptual row in the cipslaVideoProfileTable CipslaVideoProfileEntry .1.3.6.1.4.1.9.9.766.1.1.1.1 |
cipslaVideoProfileIDAn arbitrary index that uniquely identifies a video profile Unsigned32 .1.3.6.1.4.1.9.9.766.1.1.1.1.1 |
cipslaVideoProfileRowStatusThis object is used to create a new row or modify or delete an
existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.766.1.1.1.1.2 |
cipslaVideoProfileStorageTypeThis object specifies the storage type for this conceptual row.
The following columnar objects are allowed to be writable
when the storageType of this conceptual row is permanent(4):
cipslaVideoProfileDescription
cipslaVideoProfileEndpointType
cipslaVideoProfileCodec
cipslaVideoProfileVideoContents
cipslaVideoProfileFrameRate
cipslaVideoProfileResolution
cipslaVideoProfileAvgBitrate
cipslaVideoProfileMaxBitrate
cipslaVideoProfileMinBitrate
cipslaVideoProfileBitrateWindowSize
cipslaVideoProfileIframeMaxSize
cipslaVideoProfileIframeRefreshInterval
cipslaVideoProfileRtpAvgSize
cipslaVideoProfileRtpJitterPatternrw StorageType (SNMPv2-TC) .1.3.6.1.4.1.9.9.766.1.1.1.1.3 |
cipslaVideoProfileNameThis object specifies the name of an IP SLA video profile.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.766.1.1.1.1.4 |
cipslaVideoProfileDescriptionThis object specifies the detailed description string of this
video profile.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.766.1.1.1.1.5 |
cipslaVideoProfileEndpointTypeThis object specifies the sender endpoint type which determines
the traffic pattern according to the encoder's characteristics
while generating and sending video packets.
custom - Allows flexibile endpoint behavior
cts1k - Cisco Telepresence System CTS-1000
cts3k - Cisco Telepresence System CTS-3000
cp99xx - Cisco CP-9900 series video IP phones
unknown - unknown endpoint typerw Enumeration .1.3.6.1.4.1.9.9.766.1.1.1.1.6 |
cipslaVideoProfileCodecThis object specifies the video codec and codec profile for how
the video contents are encoded in byte streams.rw CvcVideoProfile (CISCO-VIDEO-SESSION-MIB) .1.3.6.1.4.1.9.9.766.1.1.1.1.7 |
cipslaVideoProfileVideoContentsThis object specifies the video contents that determine the
amount of information to be encoded by the video sender and thus
have effects on the peak rate and frame size in the video
traffic generation. This gives a high level description of the
traffic patterns, and can be overwritten by the detailed
parameters such as cipslaVideoProfileIframeRefreshInterval.
The supported video contents are as follows.
conferenceRoom - conference room scene
singlePerson - single person in video conferencing
presentation - presentation video
sports - sports activities video
streetView - video scene from street views
other - other scenesrw Enumeration .1.3.6.1.4.1.9.9.766.1.1.1.1.8 |
cipslaVideoProfileFrameRateThis object specifies the video frame rates in the generated
video traffic, in unit of 'frames per 1K seconds' or fpks. For
example, 30000 means 30 frames per second (fps), and 7500 means
7.5 fps. The maximum frame rate is 120 fps or 120000 fpks.rw Unsigned32 .1.3.6.1.4.1.9.9.766.1.1.1.1.9 |
cipslaVideoProfileResolutionThis object specifies the video frame resolution of the
generated video traffic.rw CvcVideoResolution (CISCO-VIDEO-TC) .1.3.6.1.4.1.9.9.766.1.1.1.1.10 |
cipslaVideoProfileAvgBitrateThis object specifies the average bit rate of a video traffic
pattern in kilo-bits per second. It is used by the sender's
encoder to upper-limit the generated video packets.rw Unsigned32 .1.3.6.1.4.1.9.9.766.1.1.1.1.11 |
cipslaVideoProfileMaxBitrateThis object specifies the maximum bit rate or peak rate of the
video traffic that can be generated by the sender's encoder, in
kilo-bits per second.
This value is valid only in the range from the average bit rate
to 10 times the average bit rate, where the average bit rate is
specified in cipslaVideoProfileAvgBitrate object.rw Unsigned32 .1.3.6.1.4.1.9.9.766.1.1.1.1.12 |
cipslaVideoProfileMinBitrateThis object specifies the minimum bit rate in kilo-bits per
second, at which the video traffic can be generated even when
the video contents are still.
This value is valid only in the range from 1 to the average bit
rate as specified in cipslaVideoProfileAvgBitrate object.rw Unsigned32 .1.3.6.1.4.1.9.9.766.1.1.1.1.13 |
cipslaVideoProfileBitrateWindowSizeThis object specifies the rate control window size which is
used by the video encoder to calculate the running average bit
rate.
The smaller the value of this bit rate window size, less bursty
of the traffic; this bitrate control window size is specified
in milliseconds.
Value 0 indicates no bitrate window control.rw Unsigned32 .1.3.6.1.4.1.9.9.766.1.1.1.1.14 |
cipslaVideoProfileIframeMaxSizeThis object specifies the maximum size of an I-frame that the
video encoder can generate, in kilo-bytes.rw Unsigned32 .1.3.6.1.4.1.9.9.766.1.1.1.1.15 |
cipslaVideoProfileIframeRefreshIntervalThis object specifies the refresh-rate of video intra-frames,
in seconds.
Value 0 indicates that only the first frame is an intra-frame,
i.e no refresh.rw Unsigned32 .1.3.6.1.4.1.9.9.766.1.1.1.1.16 |
cipslaVideoProfileRtpAvgSizeThis object specifies the average RTP packet size in generated
video traffic, in bytes.rw Unsigned32 .1.3.6.1.4.1.9.9.766.1.1.1.1.17 |
cipslaVideoProfileRtpJitterPatternThis object specifies the output buffering control mechanism of
the video encoder when generating packets.
bursty - send packets all out at once, no buffering
shaped - send packets evenly in a frame interval, with
buffering
other - other patternsrw Enumeration .1.3.6.1.4.1.9.9.766.1.1.1.1.18 |
ciscoIpslaVideoProfileMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.766.2 |
ciscoIpslaVideoProfileMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.766.2.1 |
ciscoIpslaVideoProfileMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.766.2.2 |