CISCO-LWAPP-DOWNLOAD-MIB
AI MIB Summary
The CISCO-LWAPP-DOWNLOAD-MIB manages firmware and configuration file transfer operations from Cisco LWAPP Central Controllers to associated Lightweight Access Points. It specifically tracks download session states, transfer progress, and error conditions to ensure reliable software updates across the wireless infrastructure.
This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points.
The relationship between the controller and the LWAPP APs is depicted as follows.
A measure of the quality of the signal relative to the strength of noise expressed in 'dB'.
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol
Main OID:
ciscoLwappDownloadMIB.1.3.6.1.4.1.9.9.513.4
34
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
34 total| Object Name |
|---|
ciscoLwappDownloadMIBThis MIB is intended to be implemented on all those
devices operating as Central controllers, that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
The relationship between the controller and the LWAPP
APs is depicted as follows.
A measure of the quality of the signal relative
to the strength of noise expressed in 'dB'.
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol MODULE-IDENTITY .1.3.6.1.4.1.9.9.513.4 |
ciscoLwappDownloadMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.513.4.0 |
ciscoLwappScheduledResetNotifThis notification is generated if we scheduled the
status and controller is going to reboot. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.513.4.0.1 |
ciscoLwappResetFailedNotifThis notification is generated if we failed to schedule
reset. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.513.4.0.2 |
ciscoLwappClearResetNotifThis notification is generated if we cancelled the scheduled
reset. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.513.4.0.3 |
ciscoLwappDownloadMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.513.4.1 |
ciscoLwappDLApBoot OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.513.4.1.1 |
clDLApBootTableThis table represents primary and backup version
of a a mesh AP.
An entry in this table gets added when a mesh AP
associates to the controller and entry gets removed
when mesh AP disassociates from the controller. SEQUENCE OF CLDLApBootEntry .1.3.6.1.4.1.9.9.513.4.1.1.1 |
cldlApBootEntryAn (conceptual) entry in this table represents version
information for a AP. CLDLApBootEntry .1.3.6.1.4.1.9.9.513.4.1.1.1.1 |
cldlAPNameThis object represents the name of the AP.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.513.4.1.1.1.1.1 |
cldlAPPrimaryVersionThis object represents the primary image version of the AP.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.513.4.1.1.1.1.2 |
cldlAPBackupVersionThis object represents the backup image version of the AP.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.513.4.1.1.1.1.3 |
cldlAPSwapImageThis object is used to swap the AP image.
true : swaps the image of AP.
false: do not swaps the image of AP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.513.4.1.1.1.1.4 |
cldlApDownloadImageThis object is used to configure the image.
primary : Downloads primary image from the controller.
backup : Downloads backup image from the controller.
abort : Aborts active predownload of the image on the controller.rw Enumeration .1.3.6.1.4.1.9.9.513.4.1.1.1.1.5 |
cldlPreDownloadVersionThis object represents the predownloaded version of the AP.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.513.4.1.1.1.1.6 |
cldlPreDownloadStatusThis object represents the status of the predownloaded image of the AP.ro Enumeration .1.3.6.1.4.1.9.9.513.4.1.1.1.1.7 |
cldlPreDownloadNextRetryTimeThis object represents the next retry time for
downloading the AP image from the WLC.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.9.9.513.4.1.1.1.1.8 |
cldlPreDownloadRetryCountThis object represents the number of retry count
before the AP image downloaded from the WLC.ro Unsigned32 .1.3.6.1.4.1.9.9.513.4.1.1.1.1.9 |
cldlPredownloadImageUpgradeRoleThe Efficient AP image upgrade role for the AP.
masterCentral - Master AP downloading image from controller.
masterLocal - Master AP downloading image from another master.
slaveCentral - Slave AP downloading image from controller.
slaveLocal - Slave AP downloading image from master.ro Enumeration .1.3.6.1.4.1.9.9.513.4.1.1.1.1.10 |
cldlAPSoftwareNameThis object represents the software name of the AP.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.513.4.1.1.1.1.11 |
ciscoLwappDLReset OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.513.4.1.2 |
clDLResetTableThis table used to reset the WLC and AP.
User resets WLC by adding a row to this
table through explicit management action
from the network manager. A row is created
by specifying clResetTime, or clResetDate and
clResetTime setting the RowStatus object to
'createAndGo'. SEQUENCE OF CLDLResetEntry .1.3.6.1.4.1.9.9.513.4.1.2.1 |
cldlResetEntryAn (conceptual) entry in this table used to
reset the WLC and AP. CLDLResetEntry .1.3.6.1.4.1.9.9.513.4.1.2.1.1 |
cldlResetIndexThis object uniquely identifies one instance of
sheduled reset vector of the controller. Unsigned32 .1.3.6.1.4.1.9.9.513.4.1.2.1.1.1 |
cldlResetDateAndTimeThis object used to schedule the future
reset time of the controller.
Format: MM/DD/YY:HH/MM/SS.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.9.513.4.1.2.1.1.2 |
cldlResetSwapImageThis object used to select the image
to be loaded after reset.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.513.4.1.2.1.1.3 |
cldlResetAPThis object is used to reset all the APs
associate to the controller.
true : resets all the APs.
false : do not resets the APs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.513.4.1.2.1.1.4 |
cldlResetRowStatusThis object is the status column used for creating
and deleting instances of the columnar objects in
this table.
destory : will clear the reset.
The following object is mandatory for successful
creation of an entry:
clResetDateAndTime.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.513.4.1.2.1.1.5 |
cldlResetSaveConfigThis object is used to save the configuration
before rebooting the controller.
true : save and resets the controller.
false : resets the controller with out saving configuration.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.513.4.1.2.1.1.6 |
cldlResetAlertTimeThis object is used to specify the number of seconds
before the scheduled reset at which the trap message
will be generated.
Trap will not be generated if schedule reset time is
less than the ResetAlert time.rw Unsigned32 .1.3.6.1.4.1.9.9.513.4.1.2.1.1.7 |
cldlResetBootImageThis object used to select the image
to be loaded after reset.rw Enumeration .1.3.6.1.4.1.9.9.513.4.1.2.2 |
ciscoLwappDownloadMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.513.4.2 |
ciscoLwappDownloadMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.513.4.2.1 |
ciscoLwappDownloadMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.513.4.2.2 |