CISCO-ITP-ACT-MIB
AI MIB Summary
The CISCO-ITP-ACT-MIB enables SNMP-based monitoring of SS7 message transfer statistics and signaling point performance on Cisco IP Transfer Point hardware. It exposes ITU Q.752-compliant counters and gauges for tracking SS7 traffic transported over IP, including message routing, delivery status, and node operational states.
The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. This information can be used to manage messages transported over SS7 Network via Cisco IP Transfer Point.
The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signaling point.
The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7.
Main OID:
ciscoItpActMIB.1.3.6.1.4.1.9.9.230
27
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
ciscoItpActMIBThe MIB for providing information specified
in ITU Q752 Monitoring and Measurements for
Signalling System No. 7(SS7) Network.
This information can be used to manage messages
transported over SS7 Network via Cisco IP
Transfer Point.
The Cisco IP Transfer Point (ITP) is a hardware
and software solution that transports SS7 traffic
using IP. Each ITP node provides function similar
to SS7 signaling point.
The relevant ITU documents describing this technology
is the ITU Q series, including ITU Q.700: Introduction
to CCITT Signalling System No. 7 and ITU Q.701
Functional description of the message transfer part
(MTP) of Signalling System No. 7. MODULE-IDENTITY .1.3.6.1.4.1.9.9.230 |
cItpActMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.230.0 |
cItpActMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.230.1 |
cItpActMtp3 OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.230.1.1 |
cItpActMtp3TableThis table contains information about the number
of packets and bytes at the MTP3 layer. The
information collected from both directions(send
and receive). The information is broken down
by linkset, Destination Point Code (DPC),
Originating Point Code (OPC) and Signalling
Indicator (SI). This provides the lowest granularity
required by Q752 and allows network management
stations to calculate the required fields in Q752.deprecated SEQUENCE OF CItpActMtp3TableEntry .1.3.6.1.4.1.9.9.230.1.1.1 |
cItpActMtp3TableEntryA list of MTP3 accounting objects.deprecated CItpActMtp3TableEntry .1.3.6.1.4.1.9.9.230.1.1.1.1 |
cItpActMtp3TableIdThe accounting table identifier.
'passed' : signifies that this table instance
represents statistics for packets that
matched an Access Control List (ACL) in
the linkset's inbound ACL and in the
outbound ACL.
'violation' : signifies that this table instance
represents statistics for packets that
did not match an ACL in the linkset's
inbound ACL and in the outbound ACL.deprecated Enumeration .1.3.6.1.4.1.9.9.230.1.1.1.1.1 |
cItpActMtp3LinksetNameThe name of the linkset.deprecated CItpTcLinksetId (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.230.1.1.1.1.2 |
cItpActMtp3DpcThe destination point code.deprecated CItpTcPointCode (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.230.1.1.1.1.3 |
cItpActMtp3OpcThe origin point code.deprecated CItpTcPointCode (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.230.1.1.1.1.4 |
cItpActMtp3SIThe service indicator.deprecated CItpTcServiceIndicator (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.230.1.1.1.1.5 |
cItpActMtp3RcvdPacketsSum of all received packets for this linkset, DPC and
OPC combination.rodeprecated Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.230.1.1.1.1.6 |
cItpActMtp3SentPacketsSum of all transmitted packets for this linkset, DPC
and OPC combination.rodeprecated Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.230.1.1.1.1.7 |
cItpActMtp3RcvdBytesSum of all received bytes for this linkset, DPC and
OPC combination.rodeprecated Counter32 UNITS "bytes" .1.3.6.1.4.1.9.9.230.1.1.1.1.8 |
cItpActMtp3SentBytesSum of all transmitted bytes for this linkset, DPC
and OPC combination.rodeprecated Counter32 UNITS "bytes" .1.3.6.1.4.1.9.9.230.1.1.1.1.9 |
cItpActGtt OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.230.1.2 |
cItpActGttTableThis table contains information about the number
of packets and bytes required for global title
translation.deprecated SEQUENCE OF CItpActGttTableEntry .1.3.6.1.4.1.9.9.230.1.2.1 |
cItpActGttTableEntryA list of Gtt accounting objects.deprecated CItpActGttTableEntry .1.3.6.1.4.1.9.9.230.1.2.1.1 |
cItpActGttLinksetNameThe name of the linkset.deprecated CItpTcLinksetId (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.230.1.2.1.1.1 |
cItpActGttSelectorNameThe Global Title Selector Name.deprecated CItpTcGlobalTitleSelectorName (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.230.1.2.1.1.2 |
cItpActGttGtaThe Global Title Address.deprecated CItpTcGtaAddr (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.230.1.2.1.1.3 |
cItpActGttTranslatedPcThe translated point code.deprecated CItpTcPointCode (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.230.1.2.1.1.4 |
cItpActGttPacketsNumber of packets performing Global Title
Translation.rodeprecated Counter32 UNITS "bytes" .1.3.6.1.4.1.9.9.230.1.2.1.1.5 |
cItpActGttBytesCount of bytes received that required
Global Title Translation.rodeprecated Counter32 UNITS "bytes" .1.3.6.1.4.1.9.9.230.1.2.1.1.6 |
cItpActMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.230.2 |
cItpActMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.230.2.1 |
cItpActMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.230.2.2 |