CISCO-ITP-TC-MIB
AI MIB Summary
The CISCO-ITP-TC-MIB module defines textual conventions for monitoring SS7 network signaling elements, including point codes, global title addresses, and adaptation layer protocols (M2PA, M3UA, SUA) on Cisco devices. It standardizes the data types required to track message signal units, route tables, and subsystem numbers within the ITU Q-series signaling architecture.
The defines textual conventions used by to manage devices related to the SS7 network. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7.
Abbreviations:
CDPA - Called Party Point Code CGPA - Calling Party Point Code CLLI - Common Language Location Codes CR - Connection Request message CREF - Connection Refusal message DPC - Destination Point Code ERR - Error message GTA - Global Title Address GTI - Global Title Indicator GTT - Global Title Translation LUDT - long unitdata message LUDTS - long unitdata service message M2PA - MTP2 Peer-to-Peer Adaptation Layer M3UA - MTP3-User Adaptation MAP - Mated Application Table MSU - Message Signal Unit MTP - Message Transport Protocol MTP2 - Layer 2 of Message Transport Protocol MTP3 - Layer 3 of Message Transport Protocol NAI - Nature of Address Indicator NP - Numbering Plan NTT - The Japanese Nippon Telephone & Telegraph OPC - Originating Point Code PC - Point Code RTN - Route Table Name RSR - Reset Request message SCCP - Signalling Connection Control Part SCTP - Stream Transmission Protocol(RFC 2960) SI - Signalling Indicator SP - Signalling Point SLC - Signalling Link Code SLS - Signalling Link Selector SSN - Subsystem Number SUA - SCCP-User Adaptation TFR - Transfer Restricted messages TT - Title Translation TTC - The Japanese Telecommunications Technology Committee UDT - unitdata message UDTS - unitdata service message XUDT - extended unitdata message XUDTS - extended unitdata service message
Main OID:
ciscoItpTextualConventions.1.3.6.1.4.1.9.9.231
1
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
1 total| Object Name |
|---|
ciscoItpTextualConventionsThe defines textual conventions used by to manage
devices related to the SS7 network. The
relevant ITU documents describing this technology is
the ITU Q series, including ITU Q.700: Introduction to
CCITT Signalling System No. 7 and ITU Q.701 Functional
description of the message transfer part (MTP) of
Signalling System No. 7.
Abbreviations:
CDPA - Called Party Point Code
CGPA - Calling Party Point Code
CLLI - Common Language Location Codes
CR - Connection Request message
CREF - Connection Refusal message
DPC - Destination Point Code
ERR - Error message
GTA - Global Title Address
GTI - Global Title Indicator
GTT - Global Title Translation
LUDT - long unitdata message
LUDTS - long unitdata service message
M2PA - MTP2 Peer-to-Peer Adaptation Layer
M3UA - MTP3-User Adaptation
MAP - Mated Application Table
MSU - Message Signal Unit
MTP - Message Transport Protocol
MTP2 - Layer 2 of Message Transport Protocol
MTP3 - Layer 3 of Message Transport Protocol
NAI - Nature of Address Indicator
NP - Numbering Plan
NTT - The Japanese Nippon Telephone & Telegraph
OPC - Originating Point Code
PC - Point Code
RTN - Route Table Name
RSR - Reset Request message
SCCP - Signalling Connection Control Part
SCTP - Stream Transmission Protocol(RFC 2960)
SI - Signalling Indicator
SP - Signalling Point
SLC - Signalling Link Code
SLS - Signalling Link Selector
SSN - Subsystem Number
SUA - SCCP-User Adaptation
TFR - Transfer Restricted messages
TT - Title Translation
TTC - The Japanese Telecommunications Technology
Committee
UDT - unitdata message
UDTS - unitdata service message
XUDT - extended unitdata message
XUDTS - extended unitdata service message MODULE-IDENTITY .1.3.6.1.4.1.9.9.231 |