CISCO-ITP-DSMR-UCP-MIB
AI MIB Summary
The CISCO-ITP-DSMR-UCP-MIB module monitors delivery status and routing metrics for Distributed Short Message Routing (DSMR) services operating over the Universal Computer Protocol (UCP) on Cisco ITP platforms. It tracks specific performance indicators including Short Message Peer-to-Peer (SMPP) session states, Short Message Delivery Point to Point (SMD-PP) transaction outcomes, and Weighted Round Robin (WRR) server load distribution statistics.
The MIB for providing information about Distributed Short Message Routing delivery using Universal Computer Protocol.
Acronyms and Terms:
DSMR Distributed Short Message Routing
SMPP Short Message Peer-to-Peer (protocol)
SMD-PP Short Message Delivery Point to Point.
SMS Short Message Service
UCP Universal Computer Protocol.
WRR Weighted Round Robin. A variation of the round robin algorithm that uses server weights to allow uneven distribution of traffic among a set of available servers.
********************************************
Main OID:
ciscoItpDsmrUcpMIB.1.3.6.1.4.1.9.9.1302
41
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
41 total| Object Name |
|---|
ciscoItpDsmrUcpMIBThe MIB for providing information about Distributed
Short Message Routing delivery using Universal
Computer Protocol.
Acronyms and Terms:
DSMR Distributed Short Message Routing
SMPP Short Message Peer-to-Peer (protocol)
SMD-PP Short Message Delivery Point to Point.
SMS Short Message Service
UCP Universal Computer Protocol.
WRR Weighted Round Robin. A variation of
the round robin algorithm that uses
server weights to allow uneven
distribution of traffic among a set
of available servers.
******************************************** MODULE-IDENTITY .1.3.6.1.4.1.9.9.1302 |
ciscoItpDsmrUcpMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.1302.0 |
ciscoItpDsmrUcpSessionStateThis notification is generated whenever SMPP destination
changes state. This notification provides information
on the availablity of the destination to receive and
process packets using the UCP protocol. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.1302.0.1 |
ciscoItpDsmrUcpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.1302.1 |
cdsmrUcpScalars OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.1302.1.0 |
cdsmrUcpSessionStateNotifEnabledA control to enable or disable
notifications as follows:
'true' Indicates that the ciscoItpDsmrUcpSessionState
notification should be generated..
'false' Indicates that ciscoItpDsmrUcpSessionState
notification generation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.1302.1.0.1 |
cdsmrUcpProfileTableA table that is used to monitor specific information
used to configure universal computer protocol profile.
Entries are added to this table via cdsmrUcpProfileRowStatus
in accordance with the RowStatus convention. SEQUENCE OF CdsmrUcpProfileTableEntry .1.3.6.1.4.1.9.9.1302.1.5 |
cdsmrUcpProfileTableEntryEach entry defines parameter that can be used to default
values for sessions. CdsmrUcpProfileTableEntry .1.3.6.1.4.1.9.9.1302.1.5.1 |
cdsmrUcpProfileNameA name used to define a collection of parameters for
short message peer-to-peer protocol. CmlrName (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1302.1.5.1.1 |
cdsmrUcpProfileInactivityTimerThis object specifies the duration of the
inactivity timer used by Universal Computer Protocol.
It indicates the maximum time lapse allowed between
transactions before destination is considered inactive.rw CdsmrUcpInactivityTimer UNITS "milliseconds" .1.3.6.1.4.1.9.9.1302.1.5.1.2 |
cdsmrUcpProfileResponseTimerThis object specifies the duration of the response timer
used by Universal Computer Protocol. It indicates the
amount of time to wait before retransmitting
packet.rw CdsmrUcpResponseTimer UNITS "milliseconds" .1.3.6.1.4.1.9.9.1302.1.5.1.3 |
cdsmrUcpProfileSendWindowThis object specifies the Send Window size to be
used by Universal Computer Protocol.rw CdsmrUcpSendWindow UNITS "bytes" .1.3.6.1.4.1.9.9.1302.1.5.1.7 |
cdsmrUcpProfileSessionInitTimerThis object specifies the duration of the session
initiation timer used to create Short Message
Peer-to-Peer session. It specifies the maximum amount
of time to wait for the session Bind to be received.rw CdsmrUcpSessionInitTimer UNITS "milliseconds" .1.3.6.1.4.1.9.9.1302.1.5.1.8 |
cdsmrUcpProfileRowStatusThe object is used by a management station to
create or delete the row entry in cdsmrUcpProfileTable
following the RowStatus textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.1302.1.5.1.9 |
cdsmrUcpSessionTableA table that is used to collection information on
universal computer protocol sessions. Entries are
added to this table via cdsmrUcpSessionRowStatus in
accordance with the RowStatus convention. SEQUENCE OF CdsmrUcpSessionTableEntry .1.3.6.1.4.1.9.9.1302.1.6 |
cdsmrUcpSessionTableEntryEach entry defines parameter and state information on
universal computer protocol sessions. CdsmrUcpSessionTableEntry .1.3.6.1.4.1.9.9.1302.1.6.1 |
cdsmrUcpSessionLocalPortNumberLocal port number used to establish Ucp Session. InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.1302.1.6.1.1 |
cdsmrUcpSessionLocalIpAddrTypeThis object contains the type of the local
IP address used to create an session.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.1302.1.6.1.2 |
cdsmrUcpSessionLocalIpAddressThis object contains the local IP address used to
create the session with the partner of this
session.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.1302.1.6.1.3 |
cdsmrUcpSessionDynamicDestIndicates whether dynamic destinations are allowed as
follows.
'true' - dynamic destination are allowed.
'false' - dynamic destinations are not allowed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.1302.1.6.1.4 |
cdsmrUcpSessionRowStatusThe object is used by a management station to
create or delete the row entry in cdsmrUcpSessionTable
following the RowStatus textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.1302.1.6.1.5 |
cdsmrUcpDestTableA table that is used to define a collection of information
on used to universal computer protocol destinations.
Entries are added to this table via cdsmrUcpDestRowStatus
in accordance with the RowStatus convention. SEQUENCE OF CdsmrUcpDestTableEntry .1.3.6.1.4.1.9.9.1302.1.7 |
cdsmrUcpDestTableEntryEach entry defines parameter and state information on
short message peer-to-peer protocol destinations. CdsmrUcpDestTableEntry .1.3.6.1.4.1.9.9.1302.1.7.1 |
cdsmrUcpDestNameA name used to uniquely identify a destination using
short message peer-to-peer protocol. CmlrName (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1302.1.7.1.1 |
cdsmrUcpDestInactivityTimerThis object defines the allowed values used to define
inactivity timer used by Universal Computer Protocol.
Indicates the maximum time lapse allowed between
transactions before destination is considered inactive.rw CdsmrUcpInactivityTimer UNITS "milliseconds" .1.3.6.1.4.1.9.9.1302.1.7.1.2 |
cdsmrUcpDestResponseTimerThis object specifies the duration of the response timer
used by Universal Computer Protocol. It indicates the
amount of time to wait before retransmitting
packet.rw CdsmrUcpResponseTimer UNITS "milliseconds" .1.3.6.1.4.1.9.9.1302.1.7.1.3 |
cdsmrUcpDestSendWindowThis object specifies the Send Window size to be
used by Universal Computer Protocol.rw CdsmrUcpSendWindow UNITS "bytes" .1.3.6.1.4.1.9.9.1302.1.7.1.4 |
cdsmrUcpDestSessionInitTimerThis object specifies the duration of the session
initiation timer used to create Short Message
Peer-to-Peer session. It specifies the maximum amount
of time to wait for the session Bind to be received.rw CdsmrUcpSessionInitTimer UNITS "milliseconds" .1.3.6.1.4.1.9.9.1302.1.7.1.5 |
cdsmrUcpDestRemotePortNumberRemote port number used to establish short message
peer-to-peer protocol session.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.1302.1.7.1.6 |
cdsmrUcpDestRemoteIpAddrTypeThis object contains the type of the remote
IP address used to create an session.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.1302.1.7.1.7 |
cdsmrUcpDestRemoteIpAddressThis object contains the remote IP address used to
create the session.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.1302.1.7.1.8 |
cdsmrUcpDestProfileNameSpecifies Profile from cdsmrUcpProfileTable table to
define common default parameters for session.rw CmlrName (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1302.1.7.1.9 |
cdsmrUcpDestStateCurrent state of destination.
'active' - Destination is available.
'inactive' - Destination is unvailable.
'open' - Device is listening on port for
destination to establish connection.ro Enumeration .1.3.6.1.4.1.9.9.1302.1.7.1.10 |
cdsmrUcpDestSentRequestsNumber of SMS requests sent to destination.ro Counter32 UNITS "requests" .1.3.6.1.4.1.9.9.1302.1.7.1.11 |
cdsmrUcpDestRcvdRequestsNumber of SMS requests received from destination.ro Counter32 UNITS "requests" .1.3.6.1.4.1.9.9.1302.1.7.1.12 |
cdsmrUcpDestSentResponsesNumber of SMS responses sent to destination.ro Counter32 UNITS "responses" .1.3.6.1.4.1.9.9.1302.1.7.1.13 |
cdsmrUcpDestRcvdResponsesNumber of SMS responses received from destination.ro Counter32 UNITS "responses" .1.3.6.1.4.1.9.9.1302.1.7.1.14 |
cdsmrUcpDestRowStatusThe object is used by a management station to
create or delete the row entry in cdsmrUcpDestTable
following the RowStatus textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.1302.1.7.1.15 |
ciscoItpDsmrUcpMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.1302.2 |
ciscoItpDsmrUcpMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.1302.2.1 |
ciscoItpDsmrUcpMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.1302.2.2 |