CISCO-ISDN-MIB
AI MIB Summary
The CISCO-ISDN-MIB enables monitoring of Cisco router ISDN interface states, including active B-channel sessions, call setup parameters, and Layer 1/2 signaling events via standard SNMP queries.
The MIB module to describe the status of the ISDN Interfaces on the routers.
36
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
36 total| Object Name |
|---|
ciscoIsdnMib OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.26 |
RFC1155-SMI Unknown .1.3.6.1.4.1.9.9.26 |
ciscoIsdnMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.26.1 |
isdnNeighbor OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.26.1.1 |
demandNbrTableThe list of neighbors from which the router will accept calls or
to which it will place them. SEQUENCE OF DemandNbrEntry .1.3.6.1.4.1.9.9.26.1.1.1 |
demandNbrEntryA single Neighbor. This entry is effectively permanent, and contains
information describing the neighbor, his permissions, his last call
attempt, and his cumulative effects. DemandNbrEntry .1.3.6.1.4.1.9.9.26.1.1.1.1 |
demandNbrPhysIfifIndex value of the physical interface the neighbor will be
called on. On an ISDN interface, this is the ifIndex value of
the D channel. INTEGER .1.3.6.1.4.1.9.9.26.1.1.1.1.1 |
demandNbrIdarbitrary sequence number associated with the neighbor. INTEGER .1.3.6.1.4.1.9.9.26.1.1.1.1.2 |
demandNbrLogIfifIndex value of virtual interface associated with the neighbor.
This interface maintains a queue of messages holding for the neighbor
awaiting call completion, and all statistics.rw INTEGER .1.3.6.1.4.1.9.9.26.1.1.1.1.3 |
demandNbrNameASCII name of the neighbor.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.9.26.1.1.1.1.4 |
demandNbrAddressCall Address at which the neighbor should be called.
Think of this as the set of characters following 'ATDT '
or the 'phone number' included in a D channel call request.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.9.26.1.1.1.1.5 |
demandNbrPermissionapplicable permissions.rw Enumeration .1.3.6.1.4.1.9.9.26.1.1.1.1.6 |
demandNbrMaxDurationMaximum call duration in seconds.rw INTEGER .1.3.6.1.4.1.9.9.26.1.1.1.1.7 |
demandNbrLastDurationDuration of last call in seconds.ro INTEGER .1.3.6.1.4.1.9.9.26.1.1.1.1.8 |
demandNbrClearReasonASCII reason that the last call terminated.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.9.26.1.1.1.1.9 |
demandNbrClearCodeencoded reason for the last call tear down.ro OCTET STRING .1.3.6.1.4.1.9.9.26.1.1.1.1.10 |
demandNbrSuccessCallsnumber of completed calls to neighbor since system reset.ro Counter .1.3.6.1.4.1.9.9.26.1.1.1.1.11 |
demandNbrFailCallsNumber of call attempts that have failed.ro Counter .1.3.6.1.4.1.9.9.26.1.1.1.1.12 |
demandNbrAcceptCallsNumber of calls accepted from the neighbor.ro Counter .1.3.6.1.4.1.9.9.26.1.1.1.1.13 |
demandNbrRefuseCallsNumber of calls from neighbor that we have refused.ro Counter .1.3.6.1.4.1.9.9.26.1.1.1.1.14 |
demandNbrLastAttemptTimesysUpTime of last call attempt.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.9.26.1.1.1.1.15 |
demandNbrStatusSomebody might want to manage the device using SNMP some day...rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.9.9.26.1.1.1.1.16 |
demandNbrCallOriginIndication of outgoing or incoming call.ro Enumeration .1.3.6.1.4.1.9.9.26.1.1.1.1.17 |
ciscoIsdnMibTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.26.2 |
ciscoIsdnMibTraps OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.26.2.0 |
demandNbrCallInformationThis trap/inform is sent to the manager whenever a successful
call clears, or a failed call attempt is determined to have
ultimately failed. In the event that call retry is active,
then this is after all retry attempts have failed. However,
only one such trap is sent in between successful call
attempts; subsequent call attempts result in no trap. TRAP-TYPE .1.3.6.1.4.1.9.9.26.2.0.1 |
demandNbrCallDetailsThis trap/inform is sent to the manager whenever a call
connects, or clears, or a failed call attempt is determined to
have ultimately failed. In the event that call retry is active,
then this is after all retry attempts have failed. However,
only one such trap is sent in between successful call
attempts; subsequent call attempts result in no trap.
Whenever a call connects, demandNbrLastDuration,
demandNbrClearReason, and demandNbrClearCode objects are not
included in the trap. TRAP-TYPE .1.3.6.1.4.1.9.9.26.2.0.2 |
demandNbrLayer2ChangeThis trap/inform is sent to the manager whenever the
D-channel of an interface changes state. TRAP-TYPE .1.3.6.1.4.1.9.9.26.2.0.3 |
demandNbrCNANotificationThis trap/inform is sent to the manager whenever the
an incoming call request is rejected with cause
'requested circuit/channel not available' (CNA),
code number 44.
isdnSignalingIfIndex is the ifIndex value of the interface
associated with this signaling channel.
ifIndex is the interface index of the requested bearer channel TRAP-TYPE .1.3.6.1.4.1.9.9.26.2.0.4 |
ciscoIsdnMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.26.3 |
ciscoIsdnMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.26.3.1 |
ciscoIsdnMibCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.26.3.1.1 |
ciscoIsdnMibComplianceRev1 OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.26.3.1.2 |
ciscoIsdnMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.26.3.2 |
ciscoIsdnMibGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.26.3.2.1 |
ciscoIsdnMibGroupRev1 OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.26.3.2.2 |