CISCO-LINK-ERROR-MONITOR-MIB
AI MIB Summary
The CISCO-LINK-ERROR-MONITOR-MIB enables Cisco IOS devices to track specific interface link error counters and trigger configurable actions when the rate of error accumulation between consecutive samples exceeds defined thresholds for a specified number of consecutive intervals.
The MIB module for managing Link Error Monitoring Feature on devices.
Link Error Monitoring Feature provides a mechanism to monitor a certain set of link error counters on an interface and take certain actions when the increase in the error counters between two consecutive samplings exceeds the configurable thresholds consecutively for a certain number of times.
Main OID:
ciscoLinkErrorMonitorMIB.1.3.6.1.4.1.9.9.426
24
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
24 total| Object Name |
|---|
ciscoLinkErrorMonitorMIBThe MIB module for managing Link Error Monitoring
Feature on devices.
Link Error Monitoring Feature provides a mechanism
to monitor a certain set of link error counters on
an interface and take certain actions when the
increase in the error counters between two consecutive
samplings exceeds the configurable thresholds
consecutively for a certain number of times. MODULE-IDENTITY .1.3.6.1.4.1.9.9.426 |
ciscoLinkErrMonMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.426.0 |
clemLowThresholdExceededThis notification will be sent when the increase in
an error counter type on an interface between two
consecutive sampling exceeds the error counter's
clemThresholdLow consecutively for clemSamplingTimes
number of times. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.426.0.1 |
clemHighThresholdExceededThis notification will be sent when the increase in
an error counter type on an interface between two
consecutive sampling exceeds the error counter's
clemThresholdHigh consecutively for clemSamplingTimes
number of times. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.426.0.2 |
ciscoLinkErrMonMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.426.1 |
clemGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.426.1.1 |
clemEnabledSpecifies whether the Link Error Monitor Feature is
enabled on the device or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.426.1.1.1 |
clemSamplingIntervalSpecifies the sampling interval to sample the
interfaces' monitored link error counters.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.9.9.426.1.1.2 |
clemSamplingTimesSpecifies the consecutive number of times with
error counter increase over thresholds between two
consecutive samplings before corresponding notifications
can be sent and actions can be taken on an interface.rw Unsigned32 .1.3.6.1.4.1.9.9.426.1.1.3 |
clemActionSpecifies the action to be taken on an interface
when the increase in an error counter on that
interface between two consecutive sampling
exceeds the corresponding clemThresholdHigh for
consecutive number of times as specified by
clemSamplingTimes.
errdisable
its link down.
failover
and it is the only operational member in
the channel, then no operation will be taken.
Otherwise, disable the interface by forcing
its link down, i.e., errdisable the interface.rw Enumeration .1.3.6.1.4.1.9.9.426.1.1.4 |
clemThresholdTableA table containing threshold configuration for
the monitored link error counters. SEQUENCE OF ClemThresholdEntry .1.3.6.1.4.1.9.9.426.1.1.5 |
clemThresholdEntryAn entry containing threshold configuration for
each type of link error counter that can be
monitored by this feature on the device. ClemThresholdEntry .1.3.6.1.4.1.9.9.426.1.1.5.1 |
clemThresholdCounterTypeIndicates the type of link error counter to be
monitored. ClemCounterType .1.3.6.1.4.1.9.9.426.1.1.5.1.1 |
clemThresholdLowSpecifies the low threshold for an error counter
type.
When the increase in this error counter type on
an interface between two consecutive sampling exceeds
the instance value of clemThresholdLow for this error
counter type consecutively for clemSamplingTimes number
of times, a clemLowThresholdExceeded notification on
that interface will be sent.rw Unsigned32 .1.3.6.1.4.1.9.9.426.1.1.5.1.2 |
clemThresholdHighSpecifies the high threshold for an error counter
type.
When the increase in this error counter type on an
interface between two consecutive sampling exceeds the
instance value of clemThresholdHigh for this error counter
type consecutively for clemSamplingTimes number of times,
a clemHighThresholdExceeded notification on that interface
will be sent. And, the action specified by clemAction
will be taken on that interface. The instance value of
this clemThresholdHigh must be greater than the instance
value of the clemThresholdLow of the same row.rw Unsigned32 .1.3.6.1.4.1.9.9.426.1.1.5.1.3 |
clemNotifEnableIndicates whether the generation of a specified
notification is enabled or not. If a bit corresponding
to a notification is set to 1, then that notification
can be generated.
lowThresholdExcd
notification.
highThresholdExcd
notification.rw Bits .1.3.6.1.4.1.9.9.426.1.1.6 |
clemInterfaceObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.426.1.2 |
clemIfCounterTableA table containing interface-specific link error
monitoring information for each error counter type
monitored by the feature. SEQUENCE OF ClemIfCounterEntry .1.3.6.1.4.1.9.9.426.1.2.1 |
clemIfCounterEntryAn entry containing link error monitoring information
on each capable interface for each error counter type
monitored by the feature. ClemIfCounterEntry .1.3.6.1.4.1.9.9.426.1.2.1.1 |
clemIfCounterTypeIndicates the type of link error counter to be
monitored on an interface. ClemCounterType .1.3.6.1.4.1.9.9.426.1.2.1.1.1 |
clemIfCounterEnableSpecifies whether the sampling on the corresponding
error counter type is enabled on an interface or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.426.1.2.1.1.2 |
ciscoLinkErrMonMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.426.2 |
ciscoLinkErrMonMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.426.2.1 |
ciscoLinkErrMonMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.426.2.2 |