CISCO-ITP-GSP2-MIB
AI MIB Summary
The CISCO-ITP-GSP2-MIB enables SNMP monitoring of Cisco IP Transfer Point (ITP) nodes to track SS7 signaling message transport statistics and Quality of Service (QoS) configurations over SCTP links. It specifically exposes metrics for the eight defined QoS classes (0–7), including assigned IP precedence and DSCP values, to manage the Type of Service (TOS) byte marking for SS7 traffic traversing the IP network.
The MIB for providing information specified in ITU Q752 Monitoring and Measurements for signalling System No. 7(SS7) Network. This information can be used to manage messages transported over SS7 Network via Cisco IP Transfer Point.
The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signalling point.
The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of signalling System No. 7.
The ITP Quality of Service (QoS) model allows the definition of 8 QoS classes, 0 through 7. QoS classes can be assigned only SCTP links. Only one QoS class can be assigned to an SCTP link. Class 0 will be designated as the default class. Packets that are not classified to a designated QoS class will get assigned to the default class. Each provisioned QoS class can be assigned an IP precedence value or a Differential Services Code Point (DSCP). The default class is initialized to IP precedence zero (0). The default class initial TOS setting can be changed through the command line interface. The Type of Service (TOS) byte in the IP header will be set to the IP precedence or DSCP that is assigned to class. Every packet forwarded over an SCTP link that was provisioned for a given QoS class will have the TOS byte set.
Main OID:
ciscoGsp2MIB.1.3.6.1.4.1.9.9.332
78
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
78 total| Object Name |
|---|
ciscoGsp2MIBThe MIB for providing information specified
in ITU Q752 Monitoring and Measurements for
signalling System No. 7(SS7) Network.
This information can be used to manage messages
transported over SS7 Network via Cisco IP
Transfer Point.
The Cisco IP Transfer Point (ITP) is a hardware
and software solution that transports SS7 traffic
using IP. Each ITP node provides function similar
to SS7 signalling point.
The relevant ITU documents describing this technology
is the ITU Q series, including ITU Q.700: Introduction
to CCITT signalling System No. 7 and ITU Q.701
Functional description of the message transfer part
(MTP) of signalling System No. 7.
The ITP Quality of Service (QoS) model allows the
definition of 8 QoS classes, 0 through 7.
QoS classes can be assigned only SCTP links.
Only one QoS class can be assigned to an SCTP link.
Class 0 will be designated as the default class.
Packets that are not classified to a designated QoS
class will get assigned to the default class. Each
provisioned QoS class can be assigned an IP precedence
value or a Differential Services Code Point (DSCP).
The default class is initialized to IP precedence
zero (0). The default class initial TOS setting can
be changed through the command line interface. The
Type of Service (TOS) byte in the IP header will be
set to the IP precedence or DSCP that is assigned to
class. Every packet forwarded over an SCTP link that
was provisioned for a given QoS class will have the
TOS byte set. MODULE-IDENTITY .1.3.6.1.4.1.9.9.332 |
ciscoGsp2MIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.332.0 |
ciscoGsp2MIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.332.1 |
cgsp2Events OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.332.1.1 |
cgsp2EventTableA table used to provide information about
all types of events on a signalling point. SEQUENCE OF Cgsp2EventTableEntry .1.3.6.1.4.1.9.9.332.1.1.1 |
cgsp2EventTableEntryA table of SS7 events generated and received
by a specific signalling point. Cgsp2EventTableEntry .1.3.6.1.4.1.9.9.332.1.1.1.1 |
cgsp2EventTypeThe type of event history as follows.
'as' - Application Service
'asp' - Application Service Process
'mtp3' - Message Transport Protocol Level 3
'pc' - Point-code Enumeration .1.3.6.1.4.1.9.9.332.1.1.1.1.1 |
cgsp2EventLoggedEventsThe number of events that have been logged.ro Counter32 .1.3.6.1.4.1.9.9.332.1.1.1.1.2 |
cgsp2EventDroppedEventsThe number of events that could not be logged
due to unavailable resources.ro Counter32 .1.3.6.1.4.1.9.9.332.1.1.1.1.3 |
cgsp2EventMaxEntriesThe upper limit on the number of events that the
event history can contain. A value of 0 will
prevent any event history from being retained. When
this table is full, the oldest entry will be deleted
as a new entry is added.rw Unsigned32 .1.3.6.1.4.1.9.9.332.1.1.1.1.4 |
cgsp2EventMaxEntriesAllowedThis object specifies the maximum number of events
that can be specified for cgsp2EventMaxEntries
object.ro Unsigned32 .1.3.6.1.4.1.9.9.332.1.1.1.1.5 |
cgsp2EventAsTableA table of Application Service events generated per
signalling point. SEQUENCE OF Cgsp2EventAsTableEntry .1.3.6.1.4.1.9.9.332.1.1.2 |
cgsp2EventAsTableEntryAn entry is added to this table for each application
service event associated with a particular
application service. The table contains the latest
number of events defined by the cgsp2EventMaxEntries
object. Once the table is full, the oldest entry is
removed and a new entry is created to accommodate
the new event. Cgsp2EventAsTableEntry .1.3.6.1.4.1.9.9.332.1.1.2.1 |
cgsp2EventAsNameThe application server name. This name has only
local significance. CItpTcXuaName (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.332.1.1.2.1.1 |
cgsp2EventAsIndexIndex into application service event history. Cgsp2EventIndex .1.3.6.1.4.1.9.9.332.1.1.2.1.2 |
cgsp2EventAsTextA brief description of the application service event
in text format.ro SnmpAdminString .1.3.6.1.4.1.9.9.332.1.1.2.1.3 |
cgsp2EventAsTimestampThe value of sysUpTime at the time of the application
service event was processed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.332.1.1.2.1.4 |
cgsp2EventAspTableA table of application service process events
generated per signalling point. SEQUENCE OF Cgsp2EventAspTableEntry .1.3.6.1.4.1.9.9.332.1.1.3 |
cgsp2EventAspTableEntryAn entry is added to this table for each application
service process event associated with a particular
application service process. The table contains
the latest number of events defined by the
cgsp2EventMaxEntries object. Once the table is full,
the oldest entry is removed and a new entry is created
to accommodate the new event. Cgsp2EventAspTableEntry .1.3.6.1.4.1.9.9.332.1.1.3.1 |
cgsp2EventAspNameThe application server process name. This name has
only local significance. CItpTcXuaName (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.332.1.1.3.1.1 |
cgsp2EventAspIndexIndex into application service process event history. Cgsp2EventIndex .1.3.6.1.4.1.9.9.332.1.1.3.1.2 |
cgsp2EventAspTextA brief description of the application service process
event in text format.ro SnmpAdminString .1.3.6.1.4.1.9.9.332.1.1.3.1.3 |
cgsp2EventAspTimestampThe value of sysUpTime at the time of the application
service process event was received.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.332.1.1.3.1.4 |
cgsp2EventMtp3TableA table of MTP3 events generated per signalling
point. SEQUENCE OF Cgsp2EventMtp3TableEntry .1.3.6.1.4.1.9.9.332.1.1.4 |
cgsp2EventMtp3TableEntryAn MTP3 event that was previously generated by this
signalling point.
An entry is added to this table for each SS7 event
generated on the managed system. The table contains
the latest number of events defined by the
cgsp2EventMaxEntries object.
Once the table is full, the oldest entry is removed and
a new entry is created to accommodate the new event. Cgsp2EventMtp3TableEntry .1.3.6.1.4.1.9.9.332.1.1.4.1 |
cgsp2EventMtp3IndexIndex into MTP3 event history. Cgsp2EventIndex .1.3.6.1.4.1.9.9.332.1.1.4.1.1 |
cgsp2EventMtp3TextA brief description of the SS7 event in text
format. Each event provides information of state
transitions specific to the MTP3 protocol.ro SnmpAdminString .1.3.6.1.4.1.9.9.332.1.1.4.1.2 |
cgsp2EventMtp3TimestampThe value of sysUpTime at the time of the event
was received by MTP3 layer.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.332.1.1.4.1.3 |
cgsp2EventPcTableA table of point-code events generated per
signalling point. SEQUENCE OF Cgsp2EventPcTableEntry .1.3.6.1.4.1.9.9.332.1.1.5 |
cgsp2EventPcTableEntryAn entry is added to this table for each point-code
event. The table contains the latest number of events
defined by the cgsp2EventMaxEntries object. Once the
table is full, the oldest entry is removed and a new
entry is created to accommodate the new event. Cgsp2EventPcTableEntry .1.3.6.1.4.1.9.9.332.1.1.5.1 |
cgsp2EventPcThe point code number. CItpTcPointCode (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.332.1.1.5.1.1 |
cgsp2EventPcIndexIndex into point-code event history. Cgsp2EventIndex .1.3.6.1.4.1.9.9.332.1.1.5.1.2 |
cgsp2EventPcTextA brief description of the point-code event in text
format.ro SnmpAdminString .1.3.6.1.4.1.9.9.332.1.1.5.1.3 |
cgsp2EventPcTimestampThe value of sysUpTime at the time of the point-code
event was received.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.332.1.1.5.1.4 |
cgsp2Qos OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.332.1.2 |
cgsp2QosTableA table of information related to the defining
Quality of Service to transport SS7 packets using
SCTP/IP.
Entries are added to this table via
cgsp2QosRowStatus in accordance with the
RowStatusconvention. SEQUENCE OF Cgsp2QosTableEntry .1.3.6.1.4.1.9.9.332.1.2.1 |
cgsp2QosTableEntryEach entry define information relate to a Quality
of Service class as needed to transport SS7 packets
using SCTP/IP. Cgsp2QosTableEntry .1.3.6.1.4.1.9.9.332.1.2.1.1 |
cgsp2QosClassThe quality of service class that can be defined to
transport SS7 Packets using SCTP/IP. Cgsp2TcQosClass .1.3.6.1.4.1.9.9.332.1.2.1.1.1 |
cgsp2QosTypeEnumerated list of QoS type that can be defined.
A value ipPrecedence suggests that IP Type of
Service (TOS) is based on cgsp2QosPrecedenceValue.
A value ipDscp suggests that IP Type of Service
(TOS) is based on cgsp2QosIpDscp.rw Enumeration .1.3.6.1.4.1.9.9.332.1.2.1.1.2 |
cgsp2QosPrecedenceValueA value to assign to the IP TOS bits in the
IP datagram that carries one or more SS7 packets.
The IP Precedence value is specified if
cgsp2QosType is ipPrecedence, otherwise it is -1.rw Integer32 (-1..7) .1.3.6.1.4.1.9.9.332.1.2.1.1.3 |
cgsp2QosIpDscpDiffServ CodePoint (DSCP) value to assign to the IP
TOS bits in the IP datagram that carries one or more
SS7 packets.
DSCP provides scalable mechanisms to classify packets
into groups or classes that have similar QoS
requirements and then gives these groups the required
treatment at every hop in the network.
The DSCP value is specified if cgsp2QosType
is ipDscp, otherwise it is -1.rw Integer32 (-1..63) .1.3.6.1.4.1.9.9.332.1.2.1.1.4 |
cgsp2QosAclIdITP Access lists can be used to use information
specific to SS7 packets to assign an Qos class.
A value of zero indicates that no access control
list is present.rw CItpTcAclId (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.332.1.2.1.1.5 |
cgsp2QosRowStatusThe object is used by a management station to
create or delete the row entry in cgsp2QosTable
following the RowStatus textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.332.1.2.1.1.6 |
cgsp2LocalPeer OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.332.1.3 |
cgsp2LocalPeerTableA local-peer table used establish SCTP associations.
The port will be used to receive and sent requests
to establish associations.
Entries are added to this table via
cgsp2LocalPeerRowStatus in accordance with the RowStatus
convention. SEQUENCE OF Cgsp2LocalPeerTableEntry .1.3.6.1.4.1.9.9.332.1.3.1 |
cgsp2LocalPeerTableEntryA list of attributes of the local-peer. Cgsp2LocalPeerTableEntry .1.3.6.1.4.1.9.9.332.1.3.1.1 |
cgsp2LocalPeerPortThe local SCTP port for this local-peer. The value
zero is not allowed. InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.332.1.3.1.1.1 |
cgsp2LocalPeerSlotNumberThis value is used to specify to which slot the local-peer
will be offloaded. A value of negative one indicates the
local-peer is not offloaded.ro Integer32 (-1..32767) .1.3.6.1.4.1.9.9.332.1.3.1.1.2 |
cgsp2LocalPeerRowStatusThe object is used by a management station to
create or delete a row entry in
cgsp2LocalPeerTable following the RowStatus
textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.332.1.3.1.1.3 |
cgsp2LocalPeerProcessorNumberThis value is used to specify to which processor the
local-peer will be offloaded on the line card indicated by
cgsp2LocalPeerSlotNumber. For certain line cards like
Flexwan, this value corresponds to bay number instead of
processor number.ro Integer32 .1.3.6.1.4.1.9.9.332.1.3.1.1.4 |
cgsp2LpIpAddrTableA table of Local IP addresses group together to
form the local-peer used to establish SCTP
associations.
For a given local-peer, there can be multiple local
IP addresses which are used for the multi-homing
feature of the SCTP associations. This table lists
out the configured local IP addresses.
Entries are added to this table via
cgsp2LocalPeerRowStatus in accordance with
the RowStatus convention. SEQUENCE OF Cgsp2LpIpAddrTableEntry .1.3.6.1.4.1.9.9.332.1.3.2 |
cgsp2LpIpAddrTableEntryA list of attributes of the Local IP addresses for
the local-peer. Cgsp2LpIpAddrTableEntry .1.3.6.1.4.1.9.9.332.1.3.2.1 |
cgsp2LpIpAddressNumberThis object specifies the index for the
instance's IP address. Unsigned32 .1.3.6.1.4.1.9.9.332.1.3.2.1.1 |
cgsp2LpIpAddressTypeThis object contains the type of the local
IP address used to create the association.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.332.1.3.2.1.2 |
cgsp2LpIpAddressThis object contains the local IP address used to
create association associations.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.332.1.3.2.1.3 |
cgsp2LpIpAddressRowStatusThe object is used by a management station to
create or delete the row entry in
cgsp2LpIpAddrTable following the RowStatus
textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.332.1.3.2.1.4 |
cgsp2Mtp3Errors OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.332.1.4 |
cgsp2Mtp3ErrorsTableA table of MTP3 errors that have occurred on
all Signalling Point supported by this device. SEQUENCE OF Cgsp2Mtp3ErrorsTableEntry .1.3.6.1.4.1.9.9.332.1.4.1 |
cgsp2Mtp3ErrorsTableEntryA list of attributes used to provide a summary
of the various MTP3 errors encountered by
the device. Cgsp2Mtp3ErrorsTableEntry .1.3.6.1.4.1.9.9.332.1.4.1.1 |
cgsp2Mtp3ErrorsTypeThis object specifies the index for the
various error types. Unsigned32 .1.3.6.1.4.1.9.9.332.1.4.1.1.1 |
cgsp2Mtp3ErrorsDescriptionA brief description of the MTP3 error in text format.ro SnmpAdminString .1.3.6.1.4.1.9.9.332.1.4.1.1.2 |
cgsp2Mtp3ErrorsCountNumber of errors encountered for this type of
MTP3 error as described in cgsp2Mtp3ErrorsDescription
object.ro Counter64 .1.3.6.1.4.1.9.9.332.1.4.1.1.3 |
cgsp2Operation OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.332.1.5 |
cgsp2OperMtp3OffloadIndicates location of MTP3 management function as
follows.
'main' - MTP3 Management function operates only on
main processor.
'offload' - MTP3 Management function operates on
main processor and other available
processors.ro Enumeration .1.3.6.1.4.1.9.9.332.1.5.1 |
cgsp2OperRedundancyThe redundancy capability of devices for signalling points
defined on this device as follows.
'none' - Device is not configured to support redundancy
features.
'local' - Device provides redundancy by using backup
processor on same device.
'distributed' - Device provides redundancy by using
processors on two or more different
physical device.ro Enumeration .1.3.6.1.4.1.9.9.332.1.5.2 |
cgsp2Context OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.332.1.6 |
cgsp2ContextTableDCS(Data Collector Server) use ContextId as index to get
additional information about the resource being monitoring.
This table provides informations used to identify the
resource(link or ASP). SEQUENCE OF Cgsp2ContextEntry .1.3.6.1.4.1.9.9.332.1.6.1 |
cgsp2ContextEntryEach entry (conceptual row) represents a resource(Link or ASP)
that can be monitored by the the Probeless Monitor Feature.
Each are added to deleted from this table as Link and ASP are
configured. Cgsp2ContextEntry .1.3.6.1.4.1.9.9.332.1.6.1.1 |
cgsp2ContextIdentifierThe unique Id for LINK or ASP to Application CItpTcContextId .1.3.6.1.4.1.9.9.332.1.6.1.1.1 |
cgsp2ContextTypeThis object indicate the type of resource Link or ASP.ro CItpTcContextType .1.3.6.1.4.1.9.9.332.1.6.1.1.2 |
cgsp2ContextLinksetNameThe name of the Linkset in which the link is configured and
this object only applies when the cgsp2ContextType indicates the
resource is a Link.ro CItpTcLinksetId (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.332.1.6.1.1.3 |
cgsp2ContextSlcThe Signalling Link Code for this link.This object only applies
when the cgsp2ContextType indicates the resource is an Link.ro CItpTcLinkSLC (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.332.1.6.1.1.4 |
cgsp2ContextAsNameThe Aplication server name.This object only applies when the
cgsp2ContextType indicates the resource is an ASP.ro CItpTcXuaName (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.332.1.6.1.1.5 |
cgsp2ContextAspNameThe Application Server Process Name.This object only applies
when the cgsp2ContextType indicates the resource is an ASP.ro CItpTcXuaName (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.332.1.6.1.1.6 |
cgsp2ContextNetworkNameThe Network name configure for the instance in ITPro CItpTcNetworkName (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.332.1.6.1.1.7 |
ciscoGsp2MIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.332.2 |
ciscoGsp2MIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.332.2.1 |
ciscoGsp2MIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.332.2.2 |