CISCO-LWAPP-IPV6-MIB
AI MIB Summary
The CISCO-LWAPP-IPV6-MIB module enables the configuration and monitoring of CPU Access Control Lists (ACLs) on Cisco Wireless LAN Controllers acting as LWAPP Central Controllers, specifically filtering IPv6 traffic forwarded from the Network Processing Unit to the controller's CPU. This MIB facilitates the enforcement of ordered rule sets to permit or drop specific packet types destined for the controller's management plane, thereby securing the control path between lightweight access points and the central management entity.
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points.
This MIB provides configuration and status information about the ACLs on the controller.
Particularly this mib covers the CPU ACLs for the wireless controllers.
Traffic to the controller CPU comes from the NPU (Network Processing Unit).
Using CPU ACLs, the user can place restrictions on type of traffic reaching the CPU of the controller from the NPU.
CPU ACLs introduce an ACL for the traffic to the CPU of controller. With this ACL the type of packets reaching the CPU can be controlled. The mode of operation is as follows.
The administrator designates one ACL for the traffic to the CPU. The ACL kicks in for packets from the NPU to the CPU. Each ACL is an ordered set of rules. If a rule matches then action for that rule is applied to the packet. The decision to send or drop the packet is taken based on the action parameter of the ACL.
There will be no ACL for the packets from the CPU to the NPU.
GLOSSARY
Access Control List ( ACL )
A list of rules used to restrict the traffic reaching an interface or the CPU. Each ACL is an ordered set of rules and actions. If a rule matches then the action for that rule is applied to the packet.
Access Point ( AP )
An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides acess to the distribution services via the wireless medium for associated clients.
CPU ACL ( CPU ACL )
The ACL applied to the CPU. This controls the type of traffic reaching the CPU of the controller.
Network Processing Unit ( NPU )
This entity is responsible for forwarding traffic to the CPU. The only exceptions are data coming thorugh the console port and the Service port i.e. these communicate directly with the CPU and not via the NPU.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the communciation between the Access Points and the Central Controller.
Cryptographically Generated Addresses (CGA)
Cryptographically Generated Addresses (CGAs) are IPv6 addresses, which allow for a secure association of an IPv6 address, the CGA, with a public key.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications.
Main OID:
ciscoLwappIpv6MIB.1.3.6.1.4.1.9.9.9999
104
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
104 total| Object Name |
|---|
ciscoLwappIpv6MIBThis MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.
This MIB provides configuration and status information
about the ACLs on the controller.
Particularly this mib covers the CPU ACLs for the wireless
controllers.
Traffic to the controller CPU comes from the NPU (Network
Processing Unit).
Using CPU ACLs, the user can place restrictions on type of
traffic reaching the CPU of the controller from the NPU.
CPU ACLs introduce an ACL for the traffic to the CPU of
controller. With this ACL the type of packets reaching the
CPU can be controlled. The mode of operation is as follows.
The administrator designates one ACL for the traffic to the
CPU. The ACL kicks in for packets from the NPU to the CPU.
Each ACL is an ordered set of rules. If a rule matches then
action for that rule is applied to the packet. The decision
to send or drop the packet is taken based on the action
parameter of the ACL.
There will be no ACL for the packets from the CPU to the
NPU.
GLOSSARY
Access Control List ( ACL )
A list of rules used to restrict the traffic reaching an
interface or the CPU. Each ACL is an ordered set of rules
and actions. If a rule matches then the action for that
rule is applied to the packet.
Access Point ( AP )
An entity that contains an 802.11 medium access control
( MAC ) and physical layer ( PHY ) interface and provides
acess to the distribution services via the wireless medium
for associated clients.
CPU ACL ( CPU ACL )
The ACL applied to the CPU. This controls the type of
traffic reaching the CPU of the controller.
Network Processing Unit ( NPU )
This entity is responsible for forwarding traffic to the
CPU. The only exceptions are data coming thorugh the
console port and the Service port i.e. these communicate
directly with the CPU and not via the NPU.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the communciation
between the Access Points and the Central Controller.
Cryptographically Generated Addresses (CGA)
Cryptographically Generated Addresses (CGAs) are IPv6 addresses,
which allow for a secure association of an IPv6 address,
the CGA, with a public key.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications. MODULE-IDENTITY .1.3.6.1.4.1.9.9.9999 |
ciscoLwappIpv6MIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.0 |
ciscoLwappIpv6MIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.1 |
ciscoLwappIpv6Config OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.1.1 |
cLIpv6AclTableThe table listing IPv6 ACLs (Access Control Lists) on the
Switch. SEQUENCE OF CLIpv6AclEntry .1.3.6.1.4.1.9.9.9999.1.1.1 |
cLIpv6AclEntryEach entry in this table provides information about
one IPv6 ACL of the controller. CLIpv6AclEntry .1.3.6.1.4.1.9.9.9999.1.1.1.1 |
cLIpv6AclNameName of the Access Control List.rw OCTET STRING .1.3.6.1.4.1.9.9.9999.1.1.1.1.1 |
cLIpv6AclApplyModeThe apply mode of the ACL on the switch. Mode value
'applied' means the ACL has been applied on the switch.ro Enumeration .1.3.6.1.4.1.9.9.9999.1.1.1.1.2 |
cLIpv6AclCounterClearThis object when set to 'true', will clear the
counter of the ACL represented by the
unique ACL name.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.1.1.3 |
cLIpv6AclRowStatusRow Status of the IPv6 ACL. Modification of row is possible.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.1.1.4 |
cLIpv6AclRuleTableThe table listing Acl Rules(Access Control List Entries)
on the ACL with name cLIpv6AclName. SEQUENCE OF CLIpv6AclRuleEntry .1.3.6.1.4.1.9.9.9999.1.1.2 |
cLIpv6AclRuleEntry.... CLIpv6AclRuleEntry .1.3.6.1.4.1.9.9.9999.1.1.2.1 |
cLIpv6AclRuleIndexIndex of the ACL rule. This can be updated to reset the
sequence of the rules of an ACL.rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.2.1.1 |
cLIpv6AclRuleActionThe permission mode of a rule.rw Enumeration .1.3.6.1.4.1.9.9.9999.1.1.2.1.2 |
cLIpv6AclRuleDirectionThe direction of the packet to which the rule may be
applied.rw Enumeration .1.3.6.1.4.1.9.9.9999.1.1.2.1.3 |
cLIpv6AclRuleSourceInetAddressTypeSource Inet Address type of the ACL rule.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.9999.1.1.2.1.4 |
cLIpv6AclRuleSourceInetAddressSource Inet Address of the ACL rule.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.9999.1.1.2.1.5 |
cLIpv6AclRuleSourcePrefixLengthThis object denotes the prefix length for Source
Inet address of the ACL rule.rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.2.1.6 |
cLIpv6AclRuleDestinationInetAddressTypeDestination Inet Address type of the ACL rule.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.9999.1.1.2.1.7 |
cLIpv6AclRuleDestinationInetAddressDestination Inet Address of the ACL rule.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.9999.1.1.2.1.8 |
cLIpv6AclRuleDestinationPrefixLengthThis object denotes the prefix length for Destination
Inet address of the ACL rule.rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.2.1.9 |
cLIpv6AclRuleProtocolProtocol of the packet. It can be either of the pre
specified protocols like TCP, UDP, ICMP, ESP, AH, GRE,
IP, Ethernet Over IP, OSPF or any number between 0
and 255. A value 256 implies that this rule applies
to 'Any' protocol.rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.2.1.10 |
cLIpv6AclRuleStartSourcePortThis object represents the start Source Port of the
packet. It can be either of the pre specified ports
like HTTP, HTTPS, Telnet, RADIUS etc or any number
between 0 and 65535. A value 65536
implies that this rule applies to 'Any' source port.
This value can be set only if the protocol is set to
TCP or UDP. Otherwise the value is set to Any(65536)rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.2.1.11 |
cLIpv6AclRuleEndSourcePortThis object represents the end Source Port of the packet.
It can be either of the pre specified ports like HTTP,
HTTPS, Telnet, RADIUS etc or any number between 0 and 65535.
A value 65536 implies that this rule applies to 'Any'
source port. This value can be set only if the
protocol is set to TCP or UDP.
Otherwise the value is set to Any(65536)rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.2.1.12 |
cLIpv6AclRuleStartDestinationPortThis object represents the start Destination Port of the
packet. It can be either of
the pre specified ports like HTTP, HTTPS, Telnet,
RADIUS etc or any number between 0 and 65535.
A value 65536 implies that this rule aplpies to 'Any'
Destination port. This value can be set only if the
protocol is set to TCP or UDP. Otherwise the value is
set to Any(65536)rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.2.1.13 |
cLIpv6AclRuleEndDestinationPortThis object represents the End Destination Port of the packet.
It can be either of
the pre specified ports like HTTP, HTTPS, Telnet,
RADIUS etc or any number between 0 and 65535.
A value 65536 implies that this rule aplpies to 'Any'
Destination port. This value can be set only if the
protocol is set to TCP or UDP. Otherwise the value is
set to Any(65536)rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.2.1.14 |
cLIpv6AclRuleDscpDSCP value of the rule. A value 256 implies Anyrw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.2.1.15 |
cLIpv6AclNewRuleIndexNew Index of the ACL rule. This attribute should be
updated if the requirement is to reset the sequence of
the rules of an ACL. A read on this will not yield
anything.rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.2.1.16 |
cLIpv6AclRuleHitsNumber of hits in the particular rule under the ACL.This object
is cleared by setting the cLIpv6AclCounterClear object.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.1.2.1.17 |
cLIpv6AclRuleRowStatusRow Status of the ACL Rule.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.2.1.18 |
ciscoLwappIpv6RaFiltering OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.1.1.3 |
cLIpv6RaFilteringEnabledThis object represents the IPv6 RA filtering
configuration on the controller.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.3.1 |
cLIpv6RaFilteringOnApEnabledThis object represents the IPv6 RA filtering
configuration on the controller.
When set to true, IPv6 RA filtering is enabled
on the AP.
When set to false, IPv6 RA filtering is disabled
on the AP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.3.2 |
cLIpv6RaFilteringClientInfoTableThe table lists the RA Packets Drop per client. SEQUENCE OF CLIpv6RaFilteringClientInfoEntry .1.3.6.1.4.1.9.9.9999.1.1.3.3 |
cLIpv6RaFilteringClientInfoEntryEach entry in this table provides information about
Ra Packets drop per client. CLIpv6RaFilteringClientInfoEntry .1.3.6.1.4.1.9.9.9999.1.1.3.3.1 |
cLIpv6RaFilteringClientInfoApNameThis is the AP Name on which the client is associated.ro OCTET STRING .1.3.6.1.4.1.9.9.9999.1.1.3.3.1.1 |
cLIpv6RaFilteringClientInfoWlanThis is the vap id on which the client is associated.ro Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.3.3.1.2 |
cLIpv6RaFilteringClientInfoPktsDroppedThis is the number of RA Packets dropped for the
client.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.1.3.3.1.3 |
ciscoLwappIpv6NbRaThrottleConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.1.1.4 |
cLIpv6NbRaThrottleEnabledThis object represents the IPv6 RA Throttle Policy
configuration on the controller.
When set to true, IPv6 RA Throttling is enabled
on the controller.
When set to false, IPv6 RA Throttling is disabled
on the controller.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.4.1 |
cLIpv6NbRaThrottlePeriodThis object represents the RA Throttler Policy throttle period.rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.4.2 |
cLIpv6NbRaThrottleMaxThroughThis object represents the RA Throttler Policy Max Through Value.rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.4.3 |
cLIpv6NbRaThrottleMaxThroughNoLimitEnabledThis object represents the RA Throttler Policy Max Through Nolimit
Value.
When NoLimit is set to true, the value for Max Through(cLIpv6RaThrottlerPolicyMaxThrough)
will not be set.
When NoLimit is set to false, the vlaue for Max Through will be set.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.4.4 |
cLIpv6NbRaThrottleIntervalOptionThis object represents the RA Throttler Policy interval option.rw Enumeration .1.3.6.1.4.1.9.9.9999.1.1.4.5 |
cLIpv6NbRaThrottleAllowAtleastThis object represents the RA Throttler Policy allow atleast limitrw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.4.6 |
cLIpv6NbRaThrottleAllowAtmostThis object represents the RA Throttler Policy allow atmost limitrw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.4.7 |
cLIpv6NbRaThrottleAllowNoLimitEnabledThis object represents the RA Throttler Policy Allow Nolimit
Value.
When NoLimit is set to true, the value for Allow Atmost(cLIpv6RaThrottlerPolicyAllowAtmost)
will not be set.
When NoLimit is set to false, the vlaue for Allow Atmost will be set.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.4.8 |
ciscoLwappIpv6NbTimerConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.1.1.5 |
cLIpv6NbTimerDownLifeTimeEnabledThis object represents the Neighbor Binding DownLife Timer.
When set to true, DownLife timer is enabled
on the controller.
When set to false, DownLife timer is disabled
on the controller.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.5.1 |
cLIpv6NbTimerDownLifeTimeIntervalThis object represents interval of Neighbor Binding DownLife Timer.
The interval is set on the controller only when the DownLife Timer is
enabled on the controller.rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.5.2 |
cLIpv6NbTimerStaleLifeTimeEnabledThis object represents the Neighbor Binding StaleLife Timer.
When set to true, StaleLife timer is enabled
on the controller.
When set to false, Staletime timer is disabled
on the controller.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.5.3 |
cLIpv6NbTimerStaleLifeTimeIntervalThis object represents interval of NeighborBinding StaleLife Timer.
The interval is set on the controller only when the StaleLife
Timer is enabled on the controller.rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.5.4 |
cLIpv6NbTimerReachableLifeTimeEnabledThis object represents the Neighbor Binding ReachableLife Timer.
When set to true, ReachableLife timer is enabled
on the controller.
When set to false, ReachableLife timer is disabled
on the controller.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.5.5 |
cLIpv6NbTimerReachableLifeTimeIntervalThis object represents interval of NeighborBinding ReachableLife Timer.
The interval is set on the controller only when the StaleLife
Timer is enabled on the controller.rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.5.6 |
cLIpv6NbTimerNsMulticastCacheMissForwardThis object represents the NS Multicast CacheMiss Forward
When set to true,NS Multicast CacheMiss Forward is enabled
on the controller.
When set to false,NS Multicast CacheMiss Forward is disabled
on the controller.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.5.7 |
cLIpv6NeighborBindingCounterClearThis object when set to 'true', will clear the
counter of the IPv6 Neighbor Binding.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.6 |
cLIpv6GlobalEnabledThis object represents the Global state of IPv6.
A value of 'true', will enable the Global IPv6 state.
A value of 'false', will disable the Global IPv6 state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.7 |
ciscoLwappIpv6Stats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.1.2 |
cLIpv6NeighborBindingCounterTableThis table represents the IPv6 Neighbor binding
Counters of the controller. SEQUENCE OF CLIpv6NeighborBindingCounterEntry .1.3.6.1.4.1.9.9.9999.1.2.1 |
cLIpv6NeighborBindingCounterEntryEach entry in this table represents the IPv6
Neighbor binding Counter on the controller.
Entries cannot be added/deleted and is populated by
the Type of counter. CLIpv6NeighborBindingCounterEntry .1.3.6.1.4.1.9.9.9999.1.2.1.1 |
cLIpv6NeighborBindingCounterTypeThis object represents the type of IPv6 Neighbor
Binding Counter. Enumeration .1.3.6.1.4.1.9.9.9999.1.2.1.1.1 |
cLIpv6NeighborBindingCounterNdpRsThis object represents the number of NDP Router
Solicitation counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.2 |
cLIpv6NeighborBindingCounterNdpRaThis object represents the number of NDP Router
Advertisement counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.3 |
cLIpv6NeighborBindingCounterNdpNsThis object represents the number of NDP
Neighbor Solicitation counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.4 |
cLIpv6NeighborBindingCounterNdpNaThis object represents the number of NDP
Neighbor Advertisement counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.5 |
cLIpv6NeighborBindingCounterNdpRedirectThis object represents the number of NDP
Neighbor Redirect counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.6 |
cLIpv6NeighborBindingCounterNdpCertSolThis object represents the number of NDP
Neighbor Certificate Solicitation counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.7 |
cLIpv6NeighborBindingCounterNdpCertAdvThis object represents the number of NDP
Neighbor Certificate Advertisement counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.8 |
cLIpv6NeighborBindingCounterDhcpV6SolThis object represents the number of DHCPv6
Solicitated counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.9 |
cLIpv6NeighborBindingCounterDhcpV6AdvThis object represents the number of DHCPv6
Advertisement counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.10 |
cLIpv6NeighborBindingCounterDhcpV6RequestThis object represents the number of DHCPv6
Request counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.11 |
cLIpv6NeighborBindingCounterDhcpV6ConfirmThis object represents the number of DHCPv6
Confirm counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.12 |
cLIpv6NeighborBindingCounterDhcpV6RenewThis object represents the number of DHCPv6
Renew counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.13 |
cLIpv6NeighborBindingCounterDhcpV6RebindThis object represents the number of DHCPv6
Rebind counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.14 |
cLIpv6NeighborBindingCounterDhcpV6ReplyThis object represents the number of DHCPv6
Reply counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.15 |
cLIpv6NeighborBindingCounterDhcpV6ReleaseThis object represents the number of DHCPv6
Release counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.16 |
cLIpv6NeighborBindingCounterDhcpV6DeclineThis object represents the number of DHCPv6
Decline counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.17 |
cLIpv6NeighborBindingCounterDhcpV6RecfgThis object represents the number of DHCPv6
Reconfigure counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.18 |
cLIpv6NeighborBindingCounterDhcpV6InfoReqThis object represents the number of DHCPv6
Information request counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.19 |
cLIpv6NeighborBindingCounterDhcpV6RelayForwardThis object represents the number of DHCPv6
Relay counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.20 |
cLIpv6NeighborBindingCounterDhcpV6RelayReplayThis object represents the number of DHCPv6
Relay Reply counters.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.1.1.21 |
cLIpv6NbNdSuppressDropCounter OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.1.2.2 |
cLIpv6NbNdSuppressDropCounterTotalThis object specifies the Suppress Drop Counter Total Value
including all reasons.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.2.1 |
cLIpv6NbNdSuppressDropCounterReasonSilentThis object represents the Suppress Drop Counter Value
for the reason slient drop.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.2.2 |
cIpv6NbNdSuppressDropCounterReasonInOutThis object represents the Suppress Drop Counter Value
for the reason owner is on the input interface.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.2.3 |
cLIpv6NbNdSuppressDropCounterReasonDadThis object represents the Suppress Drop Counter Value
for the reason duplicate address detected .ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.2.4 |
cLIpv6NbNdSuppressDropCounterReasonUnicastThis object represents the Suppress Drop Counter Value
for the reason unicast suppressed.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.2.5 |
cLIpv6NbNdSuppressDropCounterReasonMulticastThis object represents the Suppress Drop Counter Value
for the reason multicast suppressed.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.2.6 |
cLIpv6NbNdSuppressDropCounterReasonIntThis object represents the Suppress Drop Counter Value
for the reason internal failure.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.2.7 |
cLIpv6NbSnoopingDropCounterTableThis table represents the IPv6 Neighbor binding Snooping
Drop Counters of the controller. SEQUENCE OF CLIpv6NbSnoopingDropCounterEntry .1.3.6.1.4.1.9.9.9999.1.2.3 |
cLIpv6NbSnoopingDropCounterEntryEach entry in this table represents the IPv6
Neighbor binding Snooping drop Counter on the controller.
Entries cannot be added/deleted and is populated by
the Type of Snooping drop counter. CLIpv6NbSnoopingDropCounterEntry .1.3.6.1.4.1.9.9.9999.1.2.3.1 |
cLIpv6NbSnoopingDropCounterTypeThis object represents the type of IPv6 Neighbor
Binding Snooping Drop Counter. Enumeration .1.3.6.1.4.1.9.9.9999.1.2.3.1.1 |
cLIpv6NbSnoopingDropCounterTotalThis object represents the Snooping Drop Counter Total Value
including all reasons.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.3.1.2 |
cLIpv6NbSnoopingDropCounterSilentThis object represents the Snooping Drop Counter Value
for the reason Silent drop.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.3.1.3 |
cLIpv6NbSnoopingDropCounterReasonIntThis object represents the Snooping Drop Counter Value
for the reason internal failure.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.3.1.4 |
cLIpv6NbSnoopingDropCounterReasonCgaThis object represents the Snooping Drop Counter Value
for the reason CGA option does not verify.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.3.1.5 |
cLIpv6NbSnoopingDropCounterReasonRsaThis object represents the Snooping Drop Counter Value
for the reason RSA signature does not verify.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.3.1.6 |
cLIpv6NbSnoopingDropCounterReasonLimitThis object represents the Snooping Drop Counter Value
for the reason address limit reached.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.3.1.7 |
cLIpv6NbSnoopingDropCounterReasonMartianThis object represents the Snooping Drop Counter Value
for the reason martian packet.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.3.1.8 |
cLIpv6NbSnoopingDropCounterReasonMartianMacThis object represents the Snooping Drop Counter Value
for the reason martian mac.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.3.1.9 |
cLIpv6NbSnoopingDropCounterReasonNotAllowedThis object represents the Snooping Counter Value
for the reason more trusted entry exists.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.3.1.10 |
cLIpv6NbSnoopingDropCounterReasonNotAuthorisedThis object represents the Snooping Drop Counter Value
for the reason packet not authorized on port.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.3.1.11 |
cLIpv6NbSnoopingDropCounterReasonStopThis object represents the Snooping Drop Counter Value
for reason packet accepted but not forwarded.ro Counter32 .1.3.6.1.4.1.9.9.9999.1.2.3.1.12 |
ciscoLwappIpv6MIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.2 |