CISCO-ITP-DSMR-MIB
AI MIB Summary
The CISCO-ITP-DSMR-MIB monitors and manages the Distributed Short Message Routing (DSMR) functionality on Cisco IP Transfer Point (ITP) hardware, specifically tracking SS7 Message Signal Units (MSUs) routed over IP networks. It exposes metrics for routing decisions based on SCCP, TCAP, and MAP layer attributes—including originating/destination SME addresses, protocol identifiers, and operation codes—to facilitate traffic balancing via Round Robin or Weighted Round Robin algorithms for Mobile Originated and Terminated SMS traffic.
The MIB for providing information about Distributed Short Message Routing for Short Message Service Center. This MIB will provide information used to control and measure SS7 messages signalling units in a SS7 Network. Message Signalling Units are routed based on information found in the SCCP, TCAP, MAP, and MAP-user layers. It uses information from these layers to make customizable routing decision based on the following criteria.
- message A-address (origination SME)
- message B-address (destination SME)
- protocol identifier
- operation code
- called party address
- calling party address
The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signalling point.
The Distributed Short Message Routing will be developed in compliance to the following standards.
- GSM MAP v1, v2 and v3 MO SMS formats
- GSM MAP SMS user information for MO messages
- IS-41 MAP Mobile Originated SMS formats for
Revisions A thru D.
Acronyms and Terms A-address The originating SME of the short message.
AO Application Originated (synonymous with FO). This term is used to refer to an SMS message that is being sent from an application to the SMSC, typically over SMPP. Traffic alerts, stock quotes, sports updates are typically AO.
ANSI-41 ANSI standard for defining cellular radio telecommunications inter-system operation.
AT Application Terminated (synonymous with FT). This term is used to refer to an SMS message that is being sent to an application from the SMSC, typically over SMPP. Voting traffic is typically AT.
B-address The destination SME of the short message.
BCH Binary Coded Hexadecimal
CdPA The SCCP Called Party Address field.
CgPA The SCCP Calling Party Address field.
ESME External Short Message Entity.
DSMR Distributed Short Message Routing
FO Fixed Originated (synonymous with AO)
FT Fixed Terminated (synonymous with AT)
GSM ITU standard for defining the Global System for Mobile communications.
GTT Global Title Translation. A function normally performed in an STP, GTT is the procedure by which the destination signalling point and subsystem number(SSN) is determined from GTA digits (i.e., the global title) present in the signalling message.
IMEI International Mobile Equipment Identity
IMSI International Mobile Station Identity or International Mobile Subscriber Identity A mobile station identifier typically used in GSM networks, but is also defined for use in IS-41 networks via IS-751.
IS-41 ANSI standard for defining cellular radio telecommunications inter-system operation. Unless otherwise stated, this refers to the IS-41-D specification.
MAP SS7 Mobile Application Part. This layer provides mobility procedures to SS7 network applications. MAP is generically used to refer to both GSM-MAP, and the IS-41-D MAP Protocol.
MC Message Center. Network element responsible for relaying and store-and-forwarding of short messages in ANSI-41 networks.
MDN Mobile Directory Number. A 10-digit North American Numbering Plan number assigned to mobile users in IS-41 networks. It may be different from the MIN.
MIN Mobile Identification Number. The 10-digit North American Numbering Plan number assigned to mobile users in IS-41 networks. It may be different from the MDN.
MLR Multi-layer Routing
MO Mobile Originated. This term is used to refer to an SMS message that is being sent from an MS to the SMSC.
MS Mobile Subscriber.
MS mobile station
MSU Message Signal Unit
MT Mobile Terminated. This term is used to refer to an SMS message that is being sent from an SMSC to an MS.
MTP Message Transfer Part MTP1 Layers 1 (physical) MTP2 Layer 2 (data) and MTP3 Layer 3 (network)
M2PA SS7 MTP2-User Peer-to-Peer Adaptation Layer specified by the IETF SIGTRAN working group, which provides SCTP/IP based links for MTP3.
M3UA SS7 MTP3 User Adaptation Layer specified by RFC 3332 for MTP3 users like ISUP.
RR Round Robin. A balancing algorithm that evenly distributes traffic among available servers.
SCCP Signalling Connection Control Part. As part of the SS7 signalling protocol, it provides connectionless and connection-oriented network services above MTP Level 3.
SCP Service Control Point. An element of an SS7-based Intelligent Network which performs various service functions, such as number translation, call setup and tear down, etc.
SCTP Stream Control Transmission Protocol. A protocol designed by the SigTran working group of the IETF to transport messages reliably over IP networks(RFC 2960). It has been specifically designed with PSTN signalling in mind, but is meant to be a general IP transport protocol.
SG Signalling Gateway. SIM Subscriber Identity Module
SME Short Message Entity. An entity that may send or receive short messages, and may be fixed or mobile.
SM Short Message
SMPP Short Message Peer-to-Peer (protocol) SMD-PP Short Message Delivery Point to Point.
SMS Short Message Service, as defined in GSM and IS-41-D.
SMS-MO Short Message Service Mobile Originated.
SMS-MT Short Message Service Mobile Terminated.
SMSC Short Message Service Center. Network element responsible for relaying and store-and-forwarding of short messages.
SRI Send Routing Information or Send Routing Information for Short Messages. Refers to the procedure by which an SMSC requests the HLR to send current routing information for a particular mobile user.
SRI-SM Send Routing Information Short Message
SSP Service Switching Point. An element of an SS7-based Intelligent Network that performs call origination, termination, or tandem switching.
STP Signal Transfer Point. An element of an SS7-based Intelligent Network that performs routing of the SS7 signalling.
SUA SS7 SCCP User Adaptation Layer specified by IETF SIGTRAN for SCCP users, like GSM MAP, UMTS RANAP, CDMA IS-41, CDMA IS-634, IN INAP, CAMEL CAP.
TCAP Transaction Capability Application Part. The application layer of the SS7 signalling protocol.
UCP Universal Computer Protocol.
WRR Weighted Round Robin. A variation of the round robin algorithm that uses server weights to allow uneven distribution of traffic among a set of available servers.
All objects defined as Counter32 apply from the time the statement is activated until it is deleted.
********************************************
Main OID:
ciscoItpDsmrMIB.1.3.6.1.4.1.9.9.1300
162
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
162 total| Object Name |
|---|
ciscoItpDsmrMIBThe MIB for providing information about Distributed Short
Message Routing for Short Message Service Center. This
MIB will provide information used to control and measure
SS7 messages signalling units in a SS7 Network. Message
Signalling Units are routed based on information found
in the SCCP, TCAP, MAP, and MAP-user layers. It uses
information from these layers to make customizable
routing decision based on the following criteria.
- message A-address (origination SME)
- message B-address (destination SME)
- protocol identifier
- operation code
- called party address
- calling party address
The Cisco IP Transfer Point (ITP) is a hardware
and software solution that transports SS7 traffic
using IP. Each ITP node provides function similar
to SS7 signalling point.
The Distributed Short Message Routing will be developed in
compliance to the following standards.
- GSM MAP v1, v2 and v3 MO SMS formats
- GSM MAP SMS user information for MO messages
- IS-41 MAP Mobile Originated SMS formats for
Revisions A thru D.
Acronyms and Terms
A-address The originating SME of the short message.
AO Application Originated (synonymous with FO).
This term is used to refer to an SMS
message that is being sent from an
application to the SMSC, typically over
SMPP. Traffic alerts, stock quotes,
sports updates are typically AO.
ANSI-41 ANSI standard for defining cellular radio
telecommunications inter-system operation.
AT Application Terminated (synonymous with FT).
This term is used to refer to an SMS message
that is being sent to an application from
the SMSC, typically over SMPP. Voting
traffic is typically AT.
B-address The destination SME of the short message.
BCH Binary Coded Hexadecimal
CdPA The SCCP Called Party Address field.
CgPA The SCCP Calling Party Address field.
ESME External Short Message Entity.
DSMR Distributed Short Message Routing
FO Fixed Originated (synonymous with AO)
FT Fixed Terminated (synonymous with AT)
GSM ITU standard for defining the Global
System for Mobile communications.
GTT Global Title Translation. A function
normally performed in an STP, GTT is the
procedure by which the destination
signalling point and subsystem number(SSN)
is determined from GTA digits (i.e., the
global title) present in the signalling
message.
IMEI International Mobile Equipment Identity
IMSI International Mobile Station Identity or
International Mobile Subscriber Identity
A mobile station identifier typically
used in GSM networks, but is also defined
for use in IS-41 networks via IS-751.
IS-41 ANSI standard for defining cellular radio
telecommunications inter-system operation.
Unless otherwise stated, this refers to
the IS-41-D specification.
MAP SS7 Mobile Application Part. This layer
provides mobility procedures to SS7
network applications. MAP is generically
used to refer to both GSM-MAP, and the
IS-41-D MAP Protocol.
MC Message Center. Network element responsible
for relaying and store-and-forwarding of
short messages in ANSI-41 networks.
MDN Mobile Directory Number. A 10-digit North
American Numbering Plan number assigned to
mobile users in IS-41 networks. It may be
different from the MIN.
MIN Mobile Identification Number. The 10-digit
North American Numbering Plan number
assigned to mobile users in IS-41 networks.
It may be different from the MDN.
MLR Multi-layer Routing
MO Mobile Originated. This term is used to
refer to an SMS message that is being
sent from an MS to the SMSC.
MS Mobile Subscriber.
MS mobile station
MSU Message Signal Unit
MT Mobile Terminated. This term is used to
refer to an SMS message that is being
sent from an SMSC to an MS.
MTP Message Transfer Part
MTP1 Layers 1 (physical)
MTP2 Layer 2 (data) and
MTP3 Layer 3 (network)
M2PA SS7 MTP2-User Peer-to-Peer Adaptation
Layer specified by the IETF SIGTRAN
working group, which provides SCTP/IP
based links for MTP3.
M3UA SS7 MTP3 User Adaptation Layer specified
by RFC 3332 for MTP3 users like ISUP.
RR Round Robin. A balancing algorithm that
evenly distributes traffic among
available servers.
SCCP Signalling Connection Control Part. As
part of the SS7 signalling protocol, it
provides connectionless and
connection-oriented network services
above MTP Level 3.
SCP Service Control Point. An element of
an SS7-based Intelligent Network which
performs various service functions, such
as number translation, call setup
and tear down, etc.
SCTP Stream Control Transmission Protocol.
A protocol designed by the SigTran
working group of the IETF to transport
messages reliably over IP networks(RFC
2960).
It has been specifically designed with
PSTN signalling in mind, but is meant to
be a general IP transport protocol.
SG Signalling Gateway.
SIM Subscriber Identity Module
SME Short Message Entity. An entity that may
send or receive short messages, and may
be fixed or mobile.
SM Short Message
SMPP Short Message Peer-to-Peer (protocol)
SMD-PP Short Message Delivery Point to Point.
SMS Short Message Service, as defined in
GSM and IS-41-D.
SMS-MO Short Message Service Mobile Originated.
SMS-MT Short Message Service Mobile Terminated.
SMSC Short Message Service Center. Network
element responsible for relaying and
store-and-forwarding of short messages.
SRI Send Routing Information or Send Routing
Information for Short Messages. Refers
to the procedure by which an SMSC
requests the HLR to send current routing
information for a particular mobile user.
SRI-SM Send Routing Information Short Message
SSP Service Switching Point. An element of
an SS7-based Intelligent Network that
performs call origination, termination,
or tandem switching.
STP Signal Transfer Point. An element of
an SS7-based Intelligent Network that
performs routing of the SS7 signalling.
SUA SS7 SCCP User Adaptation Layer specified
by IETF SIGTRAN for SCCP users, like
GSM MAP, UMTS RANAP, CDMA IS-41,
CDMA IS-634, IN INAP, CAMEL CAP.
TCAP Transaction Capability Application Part.
The application layer of the SS7
signalling protocol.
UCP Universal Computer Protocol.
WRR Weighted Round Robin. A variation of
the round robin algorithm that uses
server weights to allow uneven
distribution of traffic among a set
of available servers.
All objects defined as Counter32 apply from the time the
statement is activated until it is deleted.
******************************************** MODULE-IDENTITY .1.3.6.1.4.1.9.9.1300 |
ciscoItpDsmrMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.1300.0 |
ciscoItpDsmrTableLoadThis notification is generated whenever a load
operation is started or completed. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.1300.0.1 |
ciscoItpDsmrMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.1300.1 |
cdsmrScalars OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.1300.1.1 |
cdsmrTableLoadNotifEnabledThis object controls the generation of
ciscoDsmrTableLoad as follows:
'true(1)' - the generation of ciscoDsmrTableLoad
notifications is enabled.
'false(2)' - the generation of ciscoDsmrTableLoad
notifications is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.1300.1.1.1 |
cdsmrInstTableA table that is used to provide information and measurements
related to Distributed Short Message Routing per signalling
point. Entries are added to this table via
cdsmrInstRowStatus in accordance with the RowStatus
convention. SEQUENCE OF CdsmrInstTableEntry .1.3.6.1.4.1.9.9.1300.1.2 |
cdsmrInstTableEntryEach entry in this table provides information on each
signalling point supported by this device. CdsmrInstTableEntry .1.3.6.1.4.1.9.9.1300.1.2.1 |
cdsmrInstLastChangedThe value of sysUpTime at the time of the last
creation or deletion of an entry in the Multi-Layer
configurations defined for this signalling point.
If the local network management subsystem is
re-initialized, then this object contains the
sysUpTime at the time when this occurred. This value
can be used to prevent unnecessary walks of the
various tables supporting Distributed Short
Message Routing.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.1300.1.2.1.1 |
cdsmrInstLastLoadTimeThe value of sysUpTime at the time of the last load of
a file supporting Distributed Short Message Routing
for this signalling point.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.1300.1.2.1.2 |
cdsmrInstLoadStatusThe status of the current load or status from
the prior load operation. This object will have
a value of loadInProgress while the load operation
is in progress. The cdsmrInstLastLoadTime contains
a timestamp indicating when the load operation is
completed.ro CItpTcTableLoadStatus (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.2.1.3 |
cdsmrInstLastURLThe last URL used to load a file used to configure
Distributed Short Message Routing.ro CItpTcURL (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.2.1.4 |
cdsmrInstDeliveredSmppCountsCount of the number of times a packet was routed
using Short Message Peer-to-Peer protocol.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.5 |
cdsmrInstDeliveredUcpCountsCount of the number of times a packet was routed
using Universal Computer Protocol(UCP).ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.6 |
cdsmrInstDeliveredGsmCountsCount of the number of times a GSM packet was
delivered.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.7 |
cdsmrInstDeferredGsmCountsCount of the number of times a GSM packet was
deferred.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.8 |
cdsmrInstGsmStatusReportsCount of the number GSM status reports issued by device.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.9 |
cdsmrInstUcpNotificationsCount of the number UCP notifications issued by device.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.10 |
cdsmrInstSmppDeliveryReceiptsCount of the number SMPP delivery receipts issued by
device.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.11 |
cdsmrInstRoutingFailuresCount of the number of times a packet could not be delivered
because route was not configured.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.12 |
cdsmrInstResultFailuresCount of the number of times processing of packet did not
produce valid result.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.13 |
cdsmrInstInternalErrorsCount of the number of times processing of packet was
not completed due to internal error.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.14 |
cdsmrInstParseErrorsCount of the number of times processing of packet was
not completed due to parsing error.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.15 |
cdsmrInstResourceErrorsCount of the number of times processing of packet was
not completed due to unavailable resources on device.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.16 |
cdsmrInstProvisioningErrorsCount of the number of times processing of packet was
not completed due to provisioning errors on device.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.17 |
cdsmrInstDestUnreachableErrorsCount of the number of times packet was not routed
because destination was unreachable.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.18 |
cdsmrInstDestSignalErrorsCount of the number of times packet was not routed
because destination had signal error.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.19 |
cdsmrInstTimeOutsCount of the number of times packet was not delivered
due to timeout.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.20 |
cdsmrInstBlockedPacketsCount of the number of times packets were blocked
by processing.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.21 |
cdsmrInstRoutingRequestsRcvdGsmCount of the number of routing requests received
were traffic was GSM based.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.22 |
cdsmrInstRoutingRequestsRcvdIs41Count of the number of routing requests received
were traffic was IS-41 based.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.23 |
cdsmrInstRoutingRequestsRcvdUcpCount of the number of routing requests received
were traffic was UCP based.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.24 |
cdsmrInstRoutingRequestsRcvdSmppCount of the number of routing requests received
were traffic was SMPP based.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.1300.1.2.1.25 |
cdsmrInstRowStatusThe object is used by a management station to
create or delete the row entry in cdsmrInstTable
following the RowStatus textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.1300.1.2.1.26 |
cdsmrResultGroupTableA table used to identify a group of results and define
parameter that apply to all result within the group.
Entries are added to this table via
cdsmrResultGroupRowStatus in accordance with the RowStatus
convention. SEQUENCE OF CdsmrResultGroupTableEntry .1.3.6.1.4.1.9.9.1300.1.3 |
cdsmrResultGroupTableEntryThis table is used to define a collection of results. CdsmrResultGroupTableEntry .1.3.6.1.4.1.9.9.1300.1.3.1 |
cdsmrResultGroupNameA name used to define a result group. CmlrName (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.3.1.1 |
cdsmrResultGroupServerTypeThis object specifies the server type as follows.
'esme' - Indicates this result group represents an external
short message entity (ESME). Coding this parameter
will allow the user to enter ESME specific
parameters and enable the Distributed Short Message
Routing to properly characterize the routing of the
message.
'smsc' - Indicates this result group represents a short
message service center (SMSC). Coding this
parameter will allow the user to enter SMSC
specific parameters and enable the Distributed
Short Message Routing to properly characterize
the routing of the message.rw Enumeration .1.3.6.1.4.1.9.9.1300.1.3.1.2 |
cdsmrResultGroupCdrConsolidationThe object provides a one to five ASCII characters ESME
(large account) consolidation string. This object only
applies when the cdsmrResultGroupServerType object
specifies ESME. The object returns the null string
when not specified.rw OCTET STRING( SIZE ( 0..5 ) ) .1.3.6.1.4.1.9.9.1300.1.3.1.3 |
cdsmrResultGroupIdentifierThe object provides a ESME (large account) identifier.
This object only applies when the cdsmrResultGroupServerType
object specifies ESME. The zero value is usedt to
indicate that the object has not been specified.rw Unsigned32 (0 | 100..9999) .1.3.6.1.4.1.9.9.1300.1.3.1.4 |
cdsmrResultGroupQueueLimitThis object defines the maximum number of elements on
outbound queue for any destination. The value of 0
indicates that there is no limit on the number of
entries.rw Unsigned32 .1.3.6.1.4.1.9.9.1300.1.3.1.5 |
cdsmrResultGroupQueueTimeLimitMaximum time element can exist in outbound queue.rw Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.9.9.1300.1.3.1.6 |
cdsmrResultGroupMatchSmppIdWhen specified this object provides 1 to 15 character
ESME system identifier. This object only applies when
the cdsmrResultGroupServerType object specifies ESME.rw OCTET STRING( SIZE ( 0..15 ) ) .1.3.6.1.4.1.9.9.1300.1.3.1.7 |
cdsmrResultGroupMatchSmppTypeWhen specified this object provides 1 to 12 character
ESME system type. This object only applies when the
cdsmrResultGroupServerType object specifies ESME.
When this object is not specified it will return the
null sting.rw OCTET STRING( SIZE ( 0..12 ) ) .1.3.6.1.4.1.9.9.1300.1.3.1.8 |
cdsmrResultGroupMatchUcpIdThe object provides 1 to 16 character ESME
ESME UCP address code. This object only applies when
the cdsmrResultGroupServerType object specifies ESME.rw OCTET STRING( SIZE ( 0..16 ) ) .1.3.6.1.4.1.9.9.1300.1.3.1.9 |
cdsmrResultGroupRowStatusThe object is used by a management station to
create or delete the row entry in cdsmrResultGroupTable
following the RowStatus textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.1300.1.3.1.10 |
cdsmrResultIpTableA table used to configure parameters to allow destination
to be establish at request of partner. Entries are added
to this table via cdsmrResultIpRowStatus in accordance
with the RowStatus convention. SEQUENCE OF CdsmrResultIpTableEntry .1.3.6.1.4.1.9.9.1300.1.4 |
cdsmrResultIpTableEntryThis table is used to define a list of IP addresses and
ports from which destination and establish connection. CdsmrResultIpTableEntry .1.3.6.1.4.1.9.9.1300.1.4.1 |
cdsmrResultIpNumberThis object specifies the index for a list of results
specified per result group. CmlrId (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.4.1.1 |
cdsmrResultIpRemotePortNumberRemote port number used to establish connection.
The value of zero indicates that any port number
will be accepted.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.1300.1.4.1.2 |
cdsmrResultIpRemoteIpAddrTypeThis object contains the type of the remote
IP address used to create an session.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.1300.1.4.1.3 |
cdsmrResultIpRemoteIpAddressThis object contains the remote IP address allowed
to request the session.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.1300.1.4.1.4 |
cdsmrResultIpProfileNameThe name of the profile used to specify parameter for
session as follows.
'smpp': cdsmrSmppProfileName
'ucp': cdsmrUcpProfileName
For all other values this object is ignored.rw CmlrName (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.4.1.5 |
cdsmrResultIpWeightThis object specifies the weight applied to the weighted
round robin distribution algorithm used for multi-layer
result group. An integer value in the range of 0 to 10.
A value of ten indicates the resource should be selected
ten times more than a resource assigned a weight of one.rw Integer32 .1.3.6.1.4.1.9.9.1300.1.4.1.6 |
cdsmrResultIpRowStatusThe object is used by a management station to
create or delete the row entry in cdsmrResultIpTable
following the RowStatus textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.1300.1.4.1.7 |
cdsmrResultTableA table used to configure parameters for destination
resources. The result group lists the appropriate destination
resources, and the mechanism used to select a single
destination for a given packet. State information is
determined for each possible destination. Entries are
added to this table via cdsmrResultRowStatus in accordance
with the RowStatus convention. SEQUENCE OF CdsmrResultTableEntry .1.3.6.1.4.1.9.9.1300.1.5 |
cdsmrResultTableEntryThis table is used to define a collection of
multi-layer routing statements. CdsmrResultTableEntry .1.3.6.1.4.1.9.9.1300.1.5.1 |
cdsmrResultNumberThis object specifies the index for a list of results
specified per result group. CmlrId (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.5.1.1 |
cdsmrResultDestinationTypeDestination type.rw CdsmrResultDestinationType .1.3.6.1.4.1.9.9.1300.1.5.1.2 |
cdsmrResultParametersMany of the result parameter used creating result are
optional. This object is used to indicate which
options are provided as follows.
'tranType' : cdsmrResultTransType
'gti' : cdsmrResultGti
'np' : cdsmrResultNp
'nai' : cdsmrResultNai
'pc' : cdsmrResultPc
'ssn' : cdsmrResultSsnrw CdsmrResultParameters .1.3.6.1.4.1.9.9.1300.1.5.1.3 |
cdsmrResultDestinationNameThe name of the destination as follows based on
cdsmrResultDestinationType:
'smpp': cdsmrSmppDestName
'ucp': cdsmrUcpDestName
For all other values this object is ignored.rw CmlrName (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.5.1.4 |
cdsmrResultPcA destination point code that must exist in the MTP3
routing table, and its state is extracted from MTP3
for availability purposes. This object only has
applies when the cdsmrResultDestinationType object
has the 'pc' or 'pcSsn' values.
Otherwise, this object will return zero value.rw CItpTcPointCode (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.5.1.5 |
cdsmrResultSsnThe subsystem number to be inserted into MSU. This
object only has applies when the cdsmrResultDestinationType
object has the 'pcSsn' value.
Otherwise, this object will return zero value.rw CItpTcSubSystemNumber (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.5.1.6 |
cdsmrResultGtThe global title address.
When the length of the global title address is zero it
specified a wildcard match and all global title will
match GTA clause of rule.
This object only applies when the CdsmrResultDestinationType
is set to 'gt' value.rw CItpTcGtaLongDisplay (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.5.1.7 |
cdsmrResultTransTypeThe translation type specified within the address in the
message signal unit. This object only applies when the
CdsmrResultDestinationType is set to 'gt' value and
the 'tranType' bit is set in the cdsmrResultResultParameters
object.rw CgsccpGttTransType (CISCO-ITP-GSCCP-MIB) .1.3.6.1.4.1.9.9.1300.1.5.1.8 |
cdsmrResultGtiThe global title indicator value for the global tile address
specified within the message signal unit. This object only
applies when the CdsmrResultDestinationType is set to
'gt' value.rw CgsccpGttGlobalTitleInd (CISCO-ITP-GSCCP-MIB) .1.3.6.1.4.1.9.9.1300.1.5.1.9 |
cdsmrResultNpThe numbering plan for the global tile address specified
within the message signal unit. This object only applies
when the CdsmrResultDestinationType is set to 'gt' value.rw CItpTcNumberingPlan (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.5.1.10 |
cdsmrResultNaiThe nature of specified address for the global tile
address specified within the message signal unit. This
object only applies when the cdsmrResultDestinationType is
set to 'gt' value.rw CItpTcNAI (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.5.1.11 |
cdsmrResultWeightThis object specifies the weight applied to the weighted
round robin distribution algorithm used for multi-layer
result group. An integer value in the range of 0 to 10.
A value of ten indicates the resource should be selected
ten times more than a resource assigned a weight of one.rw Integer32 .1.3.6.1.4.1.9.9.1300.1.5.1.12 |
cdsmrResultNetworkThe network name is used to indicate the network in which
the result operation will be performed.rw CItpTcNetworkName (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.5.1.13 |
cdsmrResultCountsNumber of times this entry was invoked.ro Counter32 UNITS "matches" .1.3.6.1.4.1.9.9.1300.1.5.1.14 |
cdsmrResultRowStatusThe object is used by a management station to
create or delete the row entry in cdsmrResultTable
following the RowStatus textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.1300.1.5.1.15 |
cdsmrAddressTableA table used to create a collection of addresses that
can be searched for exact or best matches. Entries are
added to this table via cdsmrAddressRowStatus in accordance
with the RowStatus convention. SEQUENCE OF CdsmrAddressTableEntry .1.3.6.1.4.1.9.9.1300.1.6 |
cdsmrAddressTableEntryEach entry in the cdsmrAddressTable is used to search
for matches within a messages signalling unit.
Message signalling that match a particular rule can
be directed to cdsmrAddressTable to allow MSU to be
directed or modified based on address information.
The table is searched using information specified in
the rule in cdsmrRuleTable Table. CdsmrAddressTableEntry .1.3.6.1.4.1.9.9.1300.1.6.1 |
cdsmrAddressTableNameA name used to define a collection of addresses used to
route and modify messages signalling units. CmlrName (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.6.1.1 |
cdsmrAddressTypeThe type of addresses in the address tables.
The different types will be used to determine
how to format and convert cdsmrAddressDigits. CmlrAddressType (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.6.1.2 |
cdsmrAddressDigitsThe digits of the address in following formats as
indicated by cdsmrAddressType object.
'hexadecimal' - The digits are hexadecimal digits specified
in ASCII as follows.
'0123456789ABCDEF' CmlrAddressDigits (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.6.1.3 |
cdsmrAddressExactMatchThis object indicates that the address specified by
cdsmrAddressDigits object must exactly match value
in message signalling unit.
'true' - Exact match is specified.
'false' - Best match is specified. TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.1300.1.6.1.4 |
cdsmrAddressResultParametersMany of the result parameter used in the processing of
address table have default values. These values are
determined by a combination of variant and operation
type. This object will be provide information which
parameter used in setting results have been specified
as follows.
'network' : cdsmrAddressSetResultNetwork
'octet' : cdsmrAddressSetResultOctet
'tranType' : cdsmrAddressResultTransType
'gti' : cdsmrAddressResultGti
'np' : cdsmrAddressResultNp
'nai' : cdsmrAddressResultNai
'pc' : cdsmrAddressResultPc
'ssn' : cdsmrAddressResultSsnrw CdsmrResultParameters .1.3.6.1.4.1.9.9.1300.1.6.1.5 |
cdsmrAddressResultNetworkThe network name is used to indicate the network in which
the result operation will be performed.rw CItpTcNetworkName (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.6.1.6 |
cdsmrAddressResultTypeSpecified the type of information to be placed into the
message signal unit or how the it will be processed.rw CdsmrResultType .1.3.6.1.4.1.9.9.1300.1.6.1.7 |
cdsmrAddressResultOctetInformation to be placed in the message signal
unit based on the value specified by the
cdsmrAddressResultType object. When the
cdsmrAddressResultType object is set to
'group' or 'gt' this object will contain
the string specifying output. For all other
values the this object will not be used in the
result processing and will have a length of
zero.rw CdsmrResultOctet .1.3.6.1.4.1.9.9.1300.1.6.1.8 |
cdsmrAddressResultTransTypeThe translation type specified within the address in the
message signal unit. This object only applies when the
cdsmrAddressResultType is set to 'gt' value and
the 'tranType' bit is set in the cdsmrAddressResultParameters
object.rw CgsccpGttTransType (CISCO-ITP-GSCCP-MIB) .1.3.6.1.4.1.9.9.1300.1.6.1.9 |
cdsmrAddressResultGtiThe global title indicator value for the global tile address
specified within the message signal unit. This object only
applies when the cdsmrAddressResultType is set to
'gt' value.rw CgsccpGttGlobalTitleInd (CISCO-ITP-GSCCP-MIB) .1.3.6.1.4.1.9.9.1300.1.6.1.10 |
cdsmrAddressResultNpThe numbering plan for the global tile address specified
within the message signal unit. This object only applies
when the cdsmrAddressResultType is set to 'gt' value.rw CItpTcNumberingPlan (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.6.1.11 |
cdsmrAddressResultNaiThe nature of specified address for the global tile
address specified within the message signal unit. This
object only applies when the cdsmrAddressResultType is
set to 'gt' value.rw CItpTcNAI (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.6.1.12 |
cdsmrAddressResultPcThe point-code to be place in the message signal unit. This
object only applies when the cdsmrAddressResultType is set
to 'pc' value.rw CItpTcPointCode (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.6.1.13 |
cdsmrAddressResultSsnThe subsystem number to be place in the message signal unit.
This object only applies when the cdsmrAddressResultType is set
to 'pcSsn' value.rw CItpTcSubSystemNumber (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.6.1.14 |
cdsmrAddressResultRuleNumberProcessing continues with rule number specified by this object.
This object only applies when the cdsmrAddressResultType is set
to 'ruleNumber' value.rw CmlrId (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.6.1.15 |
cdsmrAddressMatchCountsCount of the number of times address was matched. This counter
is only incremented when rule matches.ro Counter32 UNITS "matches" .1.3.6.1.4.1.9.9.1300.1.6.1.16 |
cdsmrAddressRowStatusThe object is used by a management station to
create or delete the row entry in cdsmrAddressTable
following the RowStatus textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.1300.1.6.1.17 |
cdsmrRuleSetTableA table that is used to specify attributes of an
application-layer message to be matched and the resulting
behavior for handling the message. Entries are added to
this table via cdsmrRuleSetRowStatus in accordance with
the RowStatus convention. SEQUENCE OF CdsmrRuleSetTableEntry .1.3.6.1.4.1.9.9.1300.1.7 |
cdsmrRuleSetTableEntryEach entry in this table represents a set of addresses
used to perform non-standard routing of messages
signalling units.. CdsmrRuleSetTableEntry .1.3.6.1.4.1.9.9.1300.1.7.1 |
cdsmrRuleSetNameA name used to define a set rules used to transform
traffic. CmlrRuleSetName (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.7.1.1 |
cdsmrRuleSetProtocolThe object is used to establish a default protocol
type for all rules within the rule set. If this
object is set to 'none' will default to protocol
specified by variant.rw CmlrRuleProtocol (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.7.1.2 |
cdsmrRuleSetStartDateAndTimeThe local date and time when this trigger and sub-triggers
will become active. When the value is null then the
cdsmrInstStartDateAndTime does not apply.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.9.1300.1.7.1.3 |
cdsmrRuleSetEndDateAndTimeThe local date and time this trigger and sub-triggers
will become inactive. When the value is null then the
cdsmrInstEndDateAndTime does not apply.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.9.1300.1.7.1.4 |
cdsmrRuleSetRowStatusThe object is used by a management station to
create or delete the row entry in cdsmrRuleSetTable
following the RowStatus textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.1300.1.7.1.5 |
cdsmrRuleTableA table that is used to specify attributes of an
application-layer message to be matched and the resulting
behavior for handling the message. Entries are added to
this table via cdsmrRuleResultRowStatus in accordance
with the RowStatus convention. SEQUENCE OF CdsmrRuleTableEntry .1.3.6.1.4.1.9.9.1300.1.8 |
cdsmrRuleTableEntryEntries in this table are searched in the specified order
defined by cdsmrRuleNumber object. CdsmrRuleTableEntry .1.3.6.1.4.1.9.9.1300.1.8.1 |
cdsmrRuleNumberThis object specifies the index for a list of secondary
triggers specified per routing table. The trigger will be
processed in ascending order. CmlrId (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.1 |
cdsmrRuleOperationTypeThe list of possible operation types.
'all' - All operations types.
'smdPp' - ANSI-41 Short message service delivery point
to point.
'smsMo' - GSM-MAP Short message service mobile
originated request.
'smsMt' - GSM-MAP Short message service mobile
terminated request.
'smsSri' - GSM-MAP send routing info for short message.
'smsReg' - ANSI-41 Short message service request.
'smsNot' - ANSI-41 Short message service notification
request
'ucpSubmit' - Match UCP Submit Short Message requestsrw Enumeration .1.3.6.1.4.1.9.9.1300.1.8.1.2 |
cdsmrRuleCdrServiceQueueProtocol used to examine message.
'none' : CDR Service queue not specified.
'available' : Matches when CDR service queue is available.
'congested' : Matches when CDR service queue is congested.
'unavailable': Matches when CDR service queue is unavailable.rw Enumeration .1.3.6.1.4.1.9.9.1300.1.8.1.3 |
cdsmrRuleInputParametersMany of the parameter used in the processing of rules
have default values. These values are determined
by a combination of variant and operation type. This
object will be provide information which parameter has
been specified as follows.
'cdrService' : Indicates that CDR service queue parameter is
specified in cdsmrRuleCdrServiceQueue
'destPort' : Indicates that the destination Port number
is specified in the cdsmrRuleDestPort
object.
'destSmeGta' : Indicates that a global title address is
specified in the cdsmrRuleDestSmeGta object.
'destSmeExact': Indicates that the cdsmrRuleDestSmeGta
address must be an exact match.
'destSmeNai' : Indicates that the nature of specified
address is specified in the
cdsmrRuleDestSmeNai object.
'destSmeNp' : Indicates that the numbering plan is
specified in the cdsmrRuleDestSmeNp object.
'destSmeImsi' : Indicates that the address specified in the
International Mobile Subscriber
Identification address. This indicator
applies to the cdsmrRuleDestSmeGta object.
'destSmeMin' : Indicates that the address specified in the
Mobile Identification Number. This indicator
applies to the cdsmrRuleDestSmeGta object.
'destSmeMinDigits'
: Minimum number global title address digits
specified in the cdsmrRuleDestSmeGta object
using the cdsmrRuleDestSmeMinDigits object.
'destSmeMaxDigits'
: Maximum number global title address digits
specified in the cdsmrRuleDestSmeGta object
using the cdsmrRuleDestSmeMaxDigits object.
'destSmeTable'
: A table of destination short message entity
addresses. The name of the table is
specified in the cdsmrRuleDestSmeTable
object.
'destSmeTableLoc'
: Specifies the location of the address table
as follows.
'true' - The name specified in the
cdsmrRuleDestSmeTable object
exists in the cdsmrAddressTable
table.
'false' - The name specified in the
cdsmrRuleDestSmeTable object
exists in the cmlrAddressTableEntry
table from the CISCO-ITP-MLR-MIB.
'destSmeTableImsi'
: Indicates that the addresses specified in the
cdsmrRuleDestSmeTable are International Mobile
Subscriber Identification addresses.
'destSmeTableNai'
: Indicates that the all nature of specified
address is specified in the
cdsmrRuleDestSmeTableNai object.
'destSmeTableNp'
: Indicates that the numbering plan is
specified in the cdsmrRuleDestSmeTableNp
object.
'destSmscGta' : Indicates that a global title address is
specified in the cdsmrRuleDestSmscGta object.
'destSmscExact'
: Indicates that the cdsmrRuleDestSmscGta
address must be an exact match.
'destSmscNai' : Indicates that the nature of specified
address is specified in the
cdsmrRuleDestSmscNai object.
'destSmscNp' : Indicates that the numbering plan is
specified in the cdsmrRuleDestSmscNp object.
'destSmscMinDigits'
: Minimum number global title address digits
specified in the cdsmrRuleDestSmscGta object
using the cdsmrRuleDestSmscMinDigits object.
'destSmscMaxDigits'
: Maximum number global title address digits
specified in the cdsmrRuleDestSmscGta object
using the cdsmrRuleDestSmscMaxDigits object.
'origImsiGta' : Indicates that a global title address is
specified in the cdsmrRuleDestSmeGta object.
'origImsiExact'
: Indicates that the cdsmrRuleDestSmeGta
address must be an exact match.
'origImsiUnknown'
: Indicates that the rule can match when
packets do not contain the orgination IMSI
address. That is, when the address is
unknown or unspecified. The IMSI address
is only specified in map version 3.
Therefore, the packets using version 1 or
2 when match when this parameter is
specified.
'origImsiNai' : Indicates that the nature of specified
address is specified in the
cdsmrRuleDestSmeNai object.
'origImsiNp' : Indicates that the numbering plan is
specified in the cdsmrRuleDestSmeNp object.
'origImsiMinDigits'
: Minimum number global title address digits
specified in the cdsmrRuleOrigImsiGta
object using the cdsmrRuleOrigImsiMinDigits
object.
'origImsiMaxDigits'
: Maximum number global title address digits
specified in the cdsmrRuleOrigImsiGta object
using the cdsmrRuleOrigImsiMaxDigits object.
'origImsiTable'
: A table of orgination IMSI addresses. The
name of the table is specified in the
cdsmrRuleOrigImsiTable object.
'origImsiTableLoc'
: Specifies the location of the address table
as follows.
'true' - The name specified in the
cdsmrRuleOrigImsiTable object
exists in the cdsmrAddressTable
table.
'false' - The name specified in the
cdsmrRuleOrigImsiTable object
exists in the cmlrAddressTableEntry
table from the CISCO-ITP-MLR-MIB.
'origSmeGta' : Indicates that a global title address is
specified in the cdsmrRuleOrigSmeGta object.
'origSmeExact': Indicates that the cdsmrRuleOrigSmeGta
address must be an exact match.
'origSmeNai' : Indicates that the nature of specified
address is specified in the
cdsmrRuleOrigSmeNai object.
'origSmeNp' : Indicates that the numbering plan is
specified in the cdsmrRuleOrigSmeNp object.
'origSmeMinDigits'
: Minimum number global title address digits
specified in the cdsmrRuleOrigSmeGta object
using the cdsmrRuleOrigSmeMinDigits object.
'origSmeMaxDigits'
: Maximum number global title address digits
specified in the cdsmrRuleOrigSmeGta object
using the cdsmrRuleOrigSmeMaxDigits object.
'origSmeTable': A table of origination short message entity
addresses. The name of the table is
specified in the cdsmrRuleOrigSmeTable
object.
'origSmeTableLoc':
: Specifies the location of the address table
as follows.
'true' - The name specified in the
cdsmrRuleOrigSmeTable object
exists in the cdsmrAddressTable
table.
'false' - The name specified in the
cdsmrRuleOrigSmeTable object
exists in the cmlrAddressTableEntry
table from the CISCO-ITP-MLR-MIB.
'origSmeTableNai'
: Indicates that the all nature of specified
address is specified in the
cdsmrRuleOrigSmeTableNai object.
'origSmeTableNp'
: Indicates that the numbering plan is
specified in the cdsmrRuleOrigSmeTableNp
object.
'origSmscGta' : Indicates that a global title address is
specified in the cdsmrRuleOrigSmscGta object.
'origSmscExact':Indicates that the cdsmrRuleOrigSmeGta
address must be an exact match.
'origSmscNai' : Indicates that the nature of specified
address is specified in the
cdsmrRuleOrigSmscNai object.
'origSmscNp' : Indicates that the numbering plan is
specified in the cdsmrRuleOrigSmscNp object.
'origSmscMinDigits'
: Minimum number global title address digits
specified in the cdsmrRuleOrigSmscGta object
using the cdsmrRuleOrigSmscMinDigits object.
'origSmscMaxDigits'
: Maximum number global title address digits
specified in the cdsmrRuleOrigSmscGta object
using the cdsmrRuleOrigSmscMaxDigits object.
'origSmscTable'
: A table of Short Message Service Center
addresses. The name of the table is
specified in the cdsmrRuleOrigSmscTable
object.
'origSmscTableLoc'
: Specifies the location of the address table
as follows.
'true' - The name specified in the
cdsmrRuleOrigSmscTable object
exists in the cdsmrAddressTable
table.
'false' - The name specified in the
cdsmrRuleOrigSmscTable object
exists in the cmlrAddressTableEntry
table from the CISCO-ITP-MLR-MIB.
'origSmscTableNai'
: Indicates that the all nature of specified
address is specified in the
cdsmrRuleOrigSmscTableNai object.
'origSmscTableNp'
: Indicates that the numbering plan is
specified in the cdsmrRuleOrigSmscTableNp
object.
'pid' : Indicates that the Protocol Identifier has
been specified in the cdsmrRuleProtocolId
object.
'tid' : Indicates that the Teleservice Identifier
has been specified in the
cdsmrRuleTeleserviceId object.rw Bits .1.3.6.1.4.1.9.9.1300.1.8.1.4 |
cdsmrRuleDestPortA destination application port number. The value of the
port number maps to the values specified in the User
Data Header (UDH) of the SMS message.
This object only applies when the 'destPort' bit is
set in the cdsmrRuleInputParameters object.rw Unsigned32 .1.3.6.1.4.1.9.9.1300.1.8.1.5 |
cdsmrRuleDestSmeGtaThe destination short message entity global title address.
When the length of the global title address is zero it
specified a wildcard match and all global title will
match GTA clause of rule.
This object only applies when the 'destSmeGta' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcGtaLongDisplay (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.6 |
cdsmrRuleDestSmeNaiThe nature of specified address for the destination short
message entity global title address specified within the
message signal unit.
This object only applies when the 'destSmeNai' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNAI (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.7 |
cdsmrRuleDestSmeNpThe numbering plan for the destination short message
entity global title address specified within the message
signal unit.
This object only applies when the 'destSmeNp' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNumberingPlan (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.8 |
cdsmrRuleDestSmeMinDigitsSpecifies the minimum number of digits that the global
title address specified by the cdsmrRuleDestSmeGta object
can contain for rule to match.
This object only applies when the 'destSmeMinDigits' bit is
set in the cdsmrRuleInputParameters object.rw CdsmrMinimumDigits .1.3.6.1.4.1.9.9.1300.1.8.1.9 |
cdsmrRuleDestSmeMaxDigitsSpecifies the maximum number of digits that the global
title address specified by the cdsmrRuleDestSmeGta object
can contain for rule to match.
This object only applies when the 'destSmeMaxDigits' bit is
set in the cdsmrRuleInputParameters object.rw CdsmrMaximumDigits .1.3.6.1.4.1.9.9.1300.1.8.1.10 |
cdsmrRuleDestSmeTableThe name of the entry in the cdsmrAddressTable that will be
searched for matches. The table will be search for the
following types of addresses based on values set in the
cdsmrRuleInputParameters object.
This object only applies when the 'destSmeTable' bit is
set in the cdsmrRuleInputParameters object.rw CmlrName (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.11 |
cdsmrRuleDestSmeTableNaiThe nature of specified address for the global tile
address specified within the message signal unit. This
object only applies when the 'destSmeTableNai' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNAI (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.12 |
cdsmrRuleDestSmeTableNpThe numbering plan for the destination short message
service center global title address specified within the
message signal unit.
This object only applies when the 'destSmeTableNp' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNumberingPlan (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.13 |
cdsmrRuleDestSmscGtaThe destination short message service center global title
address.
When the length of the global title address is zero it
specified a wildcard match and all global title will
match GTA clause of rule.
This object only applies when the 'destSmscGta' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcGtaLongDisplay (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.14 |
cdsmrRuleDestSmscNaiThe nature of specified address for the destination short
message service center global title address specified
within the message signal unit.
This object only applies when the 'destSmscNai' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNAI (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.15 |
cdsmrRuleDestSmscNpThe numbering plan for the destination short message
service center global title address specified within the
message signal unit.
This object only applies when the 'destSmscNp' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNumberingPlan (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.16 |
cdsmrRuleDestSmscMinDigitsSpecifies the minimum number of digits that the global
title address specified by the cdsmrRuleDestSmscGta object
can contain for rule to match.
This object only applies when the 'destSmscMinDigits' bit is
set in the cdsmrRuleInputParameters object.rw CdsmrMinimumDigits .1.3.6.1.4.1.9.9.1300.1.8.1.17 |
cdsmrRuleDestSmscMaxDigitsSpecifies the maximum number of digits that the global
title address specified by the cdsmrRuleDestSmscGta object
can contain for rule to match.
This object only applies when the 'destSmscMaxDigits' bit is
set in the cdsmrRuleInputParameters object.rw CdsmrMaximumDigits .1.3.6.1.4.1.9.9.1300.1.8.1.18 |
cdsmrRuleOrigImsiGtaThe origination short message entity global title address.
When the length of the global title address is zero it
specified a wildcard match and all global title will
match GTA clause of rule.
This object only applies when the 'origImsiGta' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcGtaLongDisplay (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.19 |
cdsmrRuleOrigImsiNaiThe nature of specified address for the origination short
message entity global title address specified within the
message signal unit.
This object only applies when the 'origImsiNai' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNAI (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.20 |
cdsmrRuleOrigImsiNpThe numbering plan for the origination short message
entity global title address specified within the message
signal unit.
This object only applies when the 'origImsiNp' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNumberingPlan (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.21 |
cdsmrRuleOrigImsiMinDigitsSpecifies the minimum number of digits that the global
title address specified by the cdsmrRuleOrigImsiGta object
can contain for rule to match.
This object only applies when the 'origImsiMinDigits' bit is
set in the cdsmrRuleInputParameters object.rw CdsmrMinimumDigits .1.3.6.1.4.1.9.9.1300.1.8.1.22 |
cdsmrRuleOrigImsiMaxDigitsSpecifies the maximum number of digits that the global
title address specified by the cdsmrRuleOrigImsiGta object
can contain for rule to match.
This object only applies when the 'origImsiMaxDigits' bit is
set in the cdsmrRuleInputParameters object.rw CdsmrMaximumDigits .1.3.6.1.4.1.9.9.1300.1.8.1.23 |
cdsmrRuleOrigImsiTableThe name of the entry in the cdsmrAddressTable that will be
searched for matches. The table will be search for the
following types of addresses based on values set in the
cdsmrRuleInputParameters object.
This object only applies when the 'origImsiTable' bit is
set in the cdsmrRuleInputParameters object.rw CmlrName (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.24 |
cdsmrRuleOrigSmeGtaThe origination short message entity global title address.
When the length of the global title address is zero it
specified a wildcard match and all global title will
match GTA clause of rule.
This object only applies when the 'origSmeGta' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcGtaLongDisplay (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.25 |
cdsmrRuleOrigSmeNaiThe nature of specified address for the origination short
message entity global title address specified within the
message signal unit.
This object only applies when the 'origSmeNai' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNAI (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.26 |
cdsmrRuleOrigSmeNpThe numbering plan for the origination short message
entity global title address specified within the message
signal unit.
This object only applies when the 'origSmeNp' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNumberingPlan (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.27 |
cdsmrRuleOrigSmeMinDigitsSpecifies the minimum number of digits that the global
title address specified by the cdsmrRuleOrigSmeGta object
can contain for rule to match.
This object only applies when the 'origSmeMinDigits' bit is
set in the cdsmrRuleInputParameters object.rw CdsmrMinimumDigits .1.3.6.1.4.1.9.9.1300.1.8.1.28 |
cdsmrRuleOrigSmeMaxDigitsSpecifies the maximum number of digits that the global
title address specified by the cdsmrRuleOrigSmeGta can
contain for rule to match.
This object only applies when the 'origSmeMaxDigits' bit is
set in the cdsmrRuleInputParameters object.rw CdsmrMaximumDigits .1.3.6.1.4.1.9.9.1300.1.8.1.29 |
cdsmrRuleOrigSmeTableThe name of the entry in the cdsmrAddressTable that will be
searched for matches. The table will be search for the
following types of addresses based on values set in the
cdsmrRuleInputParameters object.
This object only applies when the 'origSmeTable' bit is
set in the cdsmrRuleInputParameters object.rw CmlrName (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.30 |
cdsmrRuleOrigSmeTableNaiThe nature of specified address for the global tile
address specified within the message signal unit. This
object only applies when the 'origSmeTableNai' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNAI (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.31 |
cdsmrRuleOrigSmeTableNpThe numbering plan for the destination short message
service center global title address specified within the
message signal unit.
This object only applies when the 'origSmeTableNp' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNumberingPlan (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.32 |
cdsmrRuleOrigSmscGtaThe origination short message service center global title
address.
When the length of the global title address is zero it
specified a wildcard match and all global title will
match GTA clause of rule.
This object only applies when the 'origSmscGta' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcGtaLongDisplay (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.33 |
cdsmrRuleOrigSmscNaiThe nature of specified address for the origination short
message service center global title address specified
within the message signal unit.
This object only applies when the 'origSmscNai' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNAI (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.34 |
cdsmrRuleOrigSmscNpThe numbering plan for the origination short message
service center global title address specified within the
message signal unit.
This object only applies when the 'origSmscNp' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNumberingPlan (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.35 |
cdsmrRuleOrigSmscMinDigitsSpecifies the minimum number of digits that the global
title address specified by the cdsmrRuleOrigSmscGta
object can contain for rule to match.
This object only applies when the 'origSmscMinDigits'
bit is set in the cdsmrRuleInputParameters object.rw CdsmrMinimumDigits .1.3.6.1.4.1.9.9.1300.1.8.1.36 |
cdsmrRuleOrigSmscMaxDigitsSpecifies the maximum number of digits that the global
title address specified by the cdsmrRuleOrigSmscGta object
can contain for rule to match.
This object only applies when the 'origSmscMaxDigits' bit is
set in the cdsmrRuleInputParameters object.rw CdsmrMaximumDigits .1.3.6.1.4.1.9.9.1300.1.8.1.37 |
cdsmrRuleOrigSmscTableThe name of the entry in the cdsmrAddressTable that will be
searched for matches. The table will be search for the
following types of addresses based on values set in the
cdsmrRuleInputParameters object.
This object only applies when the 'origSmscTable' bit is
set in the cdsmrRuleInputParameters object.rw CmlrName (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.38 |
cdsmrRuleOrigSmscTableNaiThe nature of specified address for the global tile
address specified within the message signal unit. This
object only applies when the 'origSmscTableNai' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNAI (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.39 |
cdsmrRuleOrigSmscTableNpThe numbering plan for the destination short message
service center global title address specified within the
message signal unit.
This object only applies when the 'origSmscTableNp' bit is
set in the cdsmrRuleInputParameters object.rw CItpTcNumberingPlan (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.40 |
cdsmrRuleProtocolIdThe protocol identifier value used for the 'smsMo and
'smsMt' operations specified by the
cdsmrRuleParmsOperationType object.
The value of the cdsmrRuleParmsMatchPid object maps to the
values specified for the TP-PID SMS parameter.
This object only applies when the 'pid' bit is
set in the cdsmrRuleInputParameters object.rw Unsigned32 .1.3.6.1.4.1.9.9.1300.1.8.1.41 |
cdsmrRuleTeleserviceIdThe Teleservice identifier value for the following types
of operations specified by the cdsmrRuleParmsOperationType
object.
'smdPp'
'smsMo'
'smsMt'
'smsNotify'
The value of the cdsmrRuleParmsMatchTid object maps to the
values specified for the SMS_TeleserviceIdentifier
parameter in ANSI-41.
This object only applies when the 'tid' bit is
set in the cdsmrRuleInputParameters object.rw Unsigned32 .1.3.6.1.4.1.9.9.1300.1.8.1.42 |
cdsmrRuleResultParametersMany of the parameter used in the processing of rules
have default values. These values are determined
by a combination of variant and operation type. This
object will be provide information on which parameter
have been specified as follows.
'network' : cdsmrRuleSetResultNetwork
'octet' : cdsmrRuleSetResultOctet
'tranType' : cdsmrRuleResultTransType
'gti' : cdsmrRuleResultGti
'np' : cdsmrRuleResultNp
'nai' : cdsmrRuleResultNai
'pc' : cdsmrRuleResultPc
'ssn' : cdsmrRuleResultSsn
'ruleNumber': cdsmrRuleResultRuleNumberrw CdsmrResultParameters .1.3.6.1.4.1.9.9.1300.1.8.1.43 |
cdsmrRuleResultNetworkThe network name is used to indicate the network in which
the result operation will be performed.rw CItpTcNetworkName (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.44 |
cdsmrRuleResultTypeSpecified the type of information to be placed
into the message signal unit or how the it
will be processed.rw CdsmrResultType .1.3.6.1.4.1.9.9.1300.1.8.1.45 |
cdsmrRuleResultOctetInformation to be placed in the message signal
unit based on the value specified by the
cdsmrRuleSetResultType object. When the
cdsmrRuleSetResultType object is set to 'pc'
or 'none' this object will not be used in the
result processing and will have a length of
zero.rw CdsmrResultOctet .1.3.6.1.4.1.9.9.1300.1.8.1.46 |
cdsmrRuleResultTransTypeThe translation type specified within the address in the
message signal unit. This object only applies when the
cdsmrRuleSetResultType is set to 'gt' value.rw CgsccpGttTransType (CISCO-ITP-GSCCP-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.47 |
cdsmrRuleResultGtiThe global title indicator value for the global tile address
specified within the message signal unit. This object only
applies when the cdsmrRuleSetResultType is set to
'gt' value.rw CgsccpGttGlobalTitleInd (CISCO-ITP-GSCCP-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.48 |
cdsmrRuleResultNpThe numbering plan for the global tile address specified
within the message signal unit. This object only applies
when the cdsmrRuleSetResultType is set to 'gt' value.rw CItpTcNumberingPlan (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.49 |
cdsmrRuleResultNaiThe nature of specified address for the global tile
address specified within the message signal unit. This
object only applies when the cdsmrRuleSetResultType is
set to 'gt' value.rw CItpTcNAI (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.50 |
cdsmrRuleResultPcThe point-code to be place in the message signal unit. This
object only applies when the cdsmrRuleResultType is set
to 'pc' value.rw CItpTcPointCode (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.51 |
cdsmrRuleResultSsnThe subsystem number to be place in the message signal unit.
This object only applies when the cdsmrRuleResultType is set
to 'ssn' value.rw CItpTcSubSystemNumber (CISCO-ITP-TC-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.52 |
cdsmrRuleResultRuleNumberThis object specifies the next rule to execute when
rule matches. The specified rule number must be greater
than current rule.rw CmlrId (CISCO-ITP-MLR-MIB) .1.3.6.1.4.1.9.9.1300.1.8.1.53 |
cdsmrRuleResultRowStatusThe object is used by a management station to
create or delete the row entry in cdsmrRuleTable
following the RowStatus textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.1300.1.8.1.54 |
cdsmrRuleStatsTableA table that is used to specify attributes of an
application-layer message to be matched and the resulting
behavior for handling the message. SEQUENCE OF CdsmrRuleStatsTableEntry .1.3.6.1.4.1.9.9.1300.1.9 |
cdsmrRuleStatsTableEntryEntries in this table provide measurements for entries in
cdsmrRuleTable. CdsmrRuleStatsTableEntry .1.3.6.1.4.1.9.9.1300.1.9.1 |
cdsmrRuleStatsCheckedCountsCount of the number of times this rule was checked.ro Counter32 UNITS "checks" .1.3.6.1.4.1.9.9.1300.1.9.1.1 |
cdsmrRuleStatsMatchCountsCount of the number of times this rule was matched.ro Counter32 UNITS "matches" .1.3.6.1.4.1.9.9.1300.1.9.1.2 |
cdsmrRuleStatsRoutedCountsCount of the number of times this rule was matched
and packet was routed using mechanism specified by
result.ro Counter32 UNITS "successes" .1.3.6.1.4.1.9.9.1300.1.9.1.3 |
ciscoItpDsmrMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.1300.2 |
ciscoItpDsmrMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.1300.2.1 |
ciscoItpDsmrMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.1300.2.2 |