CISCO-L2L3-INTERFACE-CONFIG-MIB
AI MIB Summary
The CISCO-L2L3-INTERFACE-CONFIG-MIB manages the operational state and configuration parameters of Cisco Catalyst interfaces, specifically monitoring and controlling the transition between Layer 2 switchport modes (access, trunk, dynamic) and Layer 3 routed modes. It provides granular visibility into interface mode settings, VLAN assignments, and trunking protocols to ensure correct data plane forwarding behavior across the network infrastructure.
Interface switchport mode configuration management MIB.
This MIB is used to monitor and control configuration of interface switchport and routed mode.
Main OID:
ciscoL2L3IfConfigMIB.1.3.6.1.4.1.9.9.151
10
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
10 total| Object Name |
|---|
ciscoL2L3IfConfigMIBInterface switchport mode configuration management MIB.
This MIB is used to monitor and control
configuration of interface switchport and routed mode. MODULE-IDENTITY .1.3.6.1.4.1.9.9.151 |
ciscoL2L3IfConfigMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.151.1 |
cL2L3IfConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.151.1.1 |
cL2L3IfTableThe table shows the administratively requested and
actual operating configuration for switchport interfaces. SEQUENCE OF CL2L3IfEntry .1.3.6.1.4.1.9.9.151.1.1.1 |
cL2L3IfEntryAn entry represents the configuration and operation of a
switchport interface.
Entries are created and deleted automatically in tandem
with the corresponding ifEntries. CL2L3IfEntry .1.3.6.1.4.1.9.9.151.1.1.1.1 |
cL2L3IfModeAdminThe administratively desired interface mode.rw CL2L3InterfaceMode .1.3.6.1.4.1.9.9.151.1.1.1.1.1 |
cL2L3IfModeOperThe operational interface mode.ro CL2L3InterfaceMode .1.3.6.1.4.1.9.9.151.1.1.1.1.2 |
ciscoL2L3IfConfigMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.151.3 |
ciscoL2L3IfConfigMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.151.3.1 |
ciscoL2L3IfConfigMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.151.3.2 |